Your cart is empty.
Your cart is empty.Product Description
Low Profile Screw Mount Tri-Band WiFi Omni Antenna Model ANT-130-005
Key Features
Low Profile
- Inconspicuous - 0.6 inches Tall
- Simple Geometric Shape
- Omnidirectional Coverage
- Paintable to Blend into Surroundings
Waterproof
- Water & Dust Proof
- IP67 Rated When Installed
- Adhesive Rubber Gasket between Antenna and Mounting Surface
Vandal Resistant
- Thick Threaded Mounting Post
- Not Removable from Outside
- No Exposed Coax Cabling
Works with Any WiFi System
Use with Any WiFi Device that has External Antennas
Simple Installation
- Drill Hole in Mounting Surface
- Feed Coax Through Hole
- Tighten Antenna Nut
- Unscrew Factory Antenna from Device
- Screw on Proxicast Antenna
Multi-Antenna (MIMO) Devices
- Replace Each External Antenna with a Proxicast Antenna
- Mount as Far Apart as Possible
Tri-Band 2.4, 5.8 & 6 GHz Support
Supports all WiFi Technologies and Generations
- WiFi-1 ~ 802.11a
- WiFi-2 ~ 802.11b
- WiFi-3 ~ 802.11g
- WiFi-4 ~ 802.11ni
- WiFi-5 ~ 802.11ac
- WiFi-6 ~ 802.11ax
- WiFi-78 ~ 802.11be
Universal Compatibility
- Industry Standard RP-SMA Connector
- Works with Any Brand of WiFi Access Point, Router, Booster, Repeater, Bridge, Camera, etc.
- Use with Mesh Wireless Radios
- Use as a Bluetooth or ZigBee Antenna
Application Examples
Vending Machines
- Inventory Levels
- Machine Status
- Advertising Updates
- Price Changes
Kiosks & ATMs
- Bank Machines
- Self Service Kiosks
- Digital Signage
- Alarm Systems
Machine Control Panels
- PLC's
- NEMA Enclosures
- Weather Stations
- Meters & Pump Houses
Surveillance
- WiFi Cameras
- DVRs' & NVR's
- Covert Installations
- Law Enforcement
For Best Results
- Orient antenna vertically
- Do not extend coax cables
- Do not use a Y cable to connect 2 WiFi ports to 1 antenna
- Fully tighten coax connectors to WiFi antenna ports
- Stand 3+ feet away from antenna when testing
Cord
Reviewed in the United States on October 2, 2023
So far these work perfectly. We are very excited to continue to purchase and use these!
Peter J.
Reviewed in the United States on July 20, 2020
It mounts nice and low, has a very nice signal reception vertical profile, true 360 degree horizontal profile, does not stick out or bring unnecessary attention. The seal under the antenna gets job done with keeping the water out, included double sided tape is a nice secondary leakage and mounting protection. Works just fine with 4G signal.
Jared Imboden
Reviewed in the United States on July 16, 2020
Holy crap these things are sturdy. I mounted to outdoor Nema boxes and we've had an accidental run-in with a forklift dropping a 4x4 one and this antenna held up fine. scratched up the casing, but no cracks! Very impressive. But that's to be expected in this model. It had all the antennas as advertised pre-terminated din connections, all of which arrived in good shape.very pleased with this seller's shipping package as well.
John Kaufman
Reviewed in the United States on January 10, 2020
Perfect for my obscure needs. I have a big rack mount digital audio mixer in a Gator case that I use for festival events. I was always having to hotspot my phone or hunt for an available WiFi to download requested songs, very inconvenient. So I mounted this antenna pair along with a Netgear lb1120 into my case, hooked it up to my router and now have internet access everywhere I go. Efficient mounting, strong signals - much stronger than the lb1120 provides natively - perfect solution for me!
HereForTheStuff
Reviewed in the United States on December 27, 2019
Shipping was good. Packaging was good. Product appears to be functional, but hadn't really improved coverage over the built in Netgear antennas
NorthernIndyRyan
Reviewed in the United States on July 9, 2018
Includes a couple feet of cable, about 2" in diameter, nice and low profile, installing on the roof of my RV to improve WiFi reception on a Gigabyte homebuilt computer mobo installation where it has twin RP-SMA on-board WiFi ports.
Raven
Reviewed in the United States on February 2, 2015
I figured I would try this since I needed a low profile antenna. First off this is very pricey. The Wilson magnetic mount with vertical antenna is 40% cheaper and this is just a simple plastic housing.Upon install I accidentally broke it. My fault trying to put it in with a mallet lightly. Not the manufactures fault. But upon braking it I decided to look inside and low and behold a simple wire. No wire would loading like on normal antennas. So having a background in antennas somewhat I know the correct antenna for the duty. The higher the wavelength the shorter the antenna. So it’s a formula (Hz, wavelength and speed of light) to determine the antenna size. So for example a half wave antenna for a specific frequency may be 18” tall if the wave is 3ft tall. A quarter wave will be smaller and require more of the grounding plane to be effective.So hanging a wire off the device can cause more issues than good. So judging by the tiny wire sticking out I cannot possible see how this can even be effective one bit. I would expect some sort of pc board antenna like what’s built into the phones and devices.My conclusion aside from being overpriced is that this cannot possibly offer any performance benefits. I could be proven wrong but looking at the design it leads me to think not.
Sam Cooke
Reviewed in the United States on September 16, 2014
Great low profile antenna, but not sure how effective they truly are.
Recommended Products
$10.77
$ 4 .99 $4.99