Shopping Cart

Your cart is empty.

Your cart is empty.

QA1 T114W Wrench Spanner Tool

Free shipping on orders over $29.99

$25.95

$ 12 .99 $12.99

In Stock

About this item

  • Package Dimensions: 2.032 H x 30.48 L x 4.318 W (centimeters)
  • Country of Origin : China
  • Fit type: Vehicle Specific
  • Package Weight: 1.15 pounds


NA


mark f.
Reviewed in the United States on August 16, 2024
Works great
Gerard Chandler
Reviewed in the United States on February 6, 2024
Tool worked as designed
Dan C
Reviewed in the United States on June 1, 2023
When you spend a ton of money on coilover's,,,, these as well as the thrust bearings should be included. Come on QA1 we're all not loaded with money.
Ric Hoyt
Reviewed in the United States on October 13, 2022
I used these wrenches to crank up the springs on my QA1 coil overs. They worked fine but you need to be very careful not to bust your knuckles.
customer
Reviewed in the United States on January 14, 2022
Made for the QA1 coilover adjustment nut and lock nut. Place the wrench over or under the nut, line up the notches, and slip it on. Because of its geometry with the notches, it will not fit coming in sideways (radially).
Gus m
Reviewed in the United States on June 6, 2021
Worked flawless. Used them today and really made everything so much easier to set the coil over height!
JW
Reviewed in the United States on December 23, 2019
Very helpful. Only suggestion is to wear thick leather gloves. Then the tension starts getting tight the edges of the tool dig into your hands. TIP: Maybe dip the ends were you hold on to the tool in plastidip to create a rubber end for gripping.
CS Niles
Reviewed in the United States on July 27, 2017
This is the exact wrench QA1 called for to adjust the coil overs I bought. The grooves in the wrench did not line up at all with the pattern of the gear on the shocks. I was able to hook the end of the wrench into one groove on the shock but based on the design all the grooves and notches should line up and lock in to make an adjustment. This was far from the case. I was able to adjust the shock but not without a struggle and the concern that I was going to strip the gear. The handle is also very short so it's hard to get good leverage. If this is the required part to adjust the shocks QA1 need a major design overhaul. Had I known this wouldn't fit as described I might have considered a cheaper alternative.