Your cart is empty.
Your cart is empty.Product Description
Simplest way to add a stable rail to your legacy pistol
- Gives your pistol a stable rail
- Compatible with all pistol rail mounted accessories such as lights and lasers
- Simple installation
- Won't damage your firearm
- Glass reinforced polymer
Compatible with Multiple Lights, Laser and Accessories
Compatible with pistol mounted lasers
Compatible with the MantisX Shooting Performance System as well as other rail mounted shooting aids
Will work will all pistol rail mounted lights
Easy Intstallation
Installation is simple with the supplied hardware and goes on in under 3 minutes. Remove your old grips and replace them with the new grips using your existing hardware on the grip portion and our supplied hardware around the trigger guard and rail. Hardware and hex key are supplied
Easiest way to Mount an accessory to your Legacy Pistol
The CC3P Grip and Rail System for the 1911 installs in under 3 minutes and is far and away the only way to mount a stable rail to your 1911. The product will not damage your gun and will allow you to mount a multitude of accessories to your legacy pistol. Installation is simple and 100% reversible, when not wanted or needed simply remove it using the supplied hex key in a couple of minutes.
Will not add any weight or thickness to your firearm
The CC3P does not add any thickness or weight to the firearm.
- Weight: 60g
- Updated look for your gun
- Superior ergonomic design
- Full length MIL-STD-1913 Picatinny rail
- Field strip compatible
Installation is simple
- Unscrew your old grips
- Screw your new grip and rail system into place using existing hardware
- Use supplied hardware to tighten rail into place
Compatible with The ReCover Tactical HC11 Holster
The HC11 Holster is designed to work seamlessly with the CC3P and features universal accessory fit. Holster is available on Amazon in Active or Passive Retention
Anthony
Reviewed in the United States on March 12, 2025
Look good and nice fit on my 1911
C
Reviewed in the United States on March 1, 2025
Perfect addition to your 1911 if you don't have a rail. The material is quality made. And it gives that custom look as well as functionality. Very sturdy with a light mounted to it. Light weight so no extra weight to your 1911. Great deal for great quality. Feels good in hand. And simple and fast to install.
カスタマー
Reviewed in Japan on February 4, 2025
ガン側のメーカーによっては多少微調整が必要だけど基本的にはピッタリ基本的にはミリガバ･series70専用、MEUもいけるかなくらい古いガバメントを簡易近代化改修するみたいなコンセプトのものなんでナウいフレームには様々な理由で着かないグリップとしてもそれなりにいい物で、薄いガバメントのグリップを程よく厚くしてくれる（GLOCK17より少し薄いくらい）といっても単純なカスタムグリップとしては同メーカーのCC3Hの方が優秀なんだけど結構頑丈で、付属のネジやガン本体が先に参っちゃうくらい長く使えるのもポイント高い
Rebecca
Reviewed in the United States on February 17, 2025
Super easy and works well. I am surprised by the durability once it was on and assembled.
ian
Reviewed in the United States on January 28, 2025
It's a great way to add a rail to 1911 that doesn't have one. Very easy to install, and solid enough construction. Once all the screws are tightened it doesn't feel flimsy at all. I think it looks cool too.Yes, having a weapon with integrated rails is going to be more durable but this is the next best thing. It doesn't add much size or weight either.Good value, would buy again.
cpowell
Reviewed in the United States on November 19, 2024
This is a great modular system. Very easy Install, and extremely sturdy. Contours well doesn’t add extra width. The tac-rail will not fit a lot of kydex style regular 1911 holsters.
CJR
Reviewed in the United States on October 17, 2024
I like the purpose and it works. Quality material fits almost perfect. Looks great.I'm not crazy about the grip insert, it's not as snug as I would like. There are a few spots that the grip doesn't completely fit flush. Not a deal breaker but a small detail that gets at me.
Tony B
Reviewed in the United States on January 25, 2021
Its hard to be positive or negative about it really. Came when it was supposed to. Fit my rock island 1911 for the most part. The holes for the grip screw didn't line up properly had to file a little bit and contort the grip to get the grip screw to line up correctly. After getting it on and fitted properly the light fit just fine and had not issues until I tried to get it to fit in the holster I had been using without the light. The trigger guard was now to wide to fit that holster and had to buy the black hawk omnivore holster for the light I was using. The biggest issue I had was when I tried my safari land holster for the gun and light I had it didn't fit. I found that the rail sits a little over 1/4 inch to low for it to fit. So rather then get a $300 holster recorder to fit one firearm I decided to go with a different lower receiver all together. And after sometime of shooting the screws that hold the front of the grip together loosened up and I lost one. The other didn't fall out because I had the light on it. So if you have a holster specific for a 1911 with a rail that you intend to keep using or you are serious about having a rail on a firearm that your life may depend on do not buy this. If you are looking for a cheap option to have a rail and you are ok with buying new holsters just for this then go ahead. For the most part it worked for me but my firearm was an investment and my life and others depend on it working.
jon
Reviewed in the United States on April 24, 2020
The new version grip is much better and more ergonomic than the original, adds 0 if any extra width to the gun, solid mount for my tlr1. some reviews have said it mounts the activation switch too low, i dont seem to have an issue with it, might be a problem with smaller hands, but im good.The only complaint i have and its minimal is i wish there was more aggressive grip texture on it, its slick, this wont be an issue for me as i stipple all of my polymer handguns and just like my glock i will do this grip and make it my own. it would be nice for them to mold some texture but its easy enough to address. very happy i purchased this as my 1911 has become a safe queen at home because i prefer to run a light on a house gun.Now i will be able to utilize it for that purpose.edited: i stiplled the grip in specific areas as well as the main grip body, the polymer is easier to work with than the glock material, turned out amazing, it rubbed slightly on the slide on one side so i used a little sandpaper to clear. not an issue to me as it fit s almost all 1911 and some fitting would be needed.side note: holster selection is hard with this as its hard with any 1911 with a light, i purchased a black hawk omnivore for a tlr 1, excellent fit and retention on it and despite bad reviews on that piece, i cannot get my fingers in to the trigger well.So i hope that helps people on the fence this is a great option, just needs some stippling.(I was not paid or compensated for my review)
HalBird_K
Reviewed in Japan on October 9, 2019
購入前は握り心地などに少し懐疑心が有ったが製品が届いてガンに装着し握ってみるとその考えはすべて無駄だったなと思いました。想像していた以上に握りやすく良く考えられているデザインだなと強く感じました。同じデザインのダストカバー部分のないグリップ部分のみのものが有れば良いのにと思うぐらいグリップデザインが気に入りました。総じてとても良く出来ていると思います。
Ricky
Reviewed in Canada on April 1, 2018
It fits great on my Norinco NP29 9MM! However you might have some gap on the grips, because I believe this thing can fit on both .45 ACP and 9MM. So that’s why for noronco at least, you might have a bit of gap on your grips.
Customer
Reviewed in Canada on December 6, 2017
L'ajustement n'est pas parfait. Le look es bien.
morgan l.
Reviewed in Canada on November 22, 2017
nice design and great feel/grip without too much friction. Compared to some aftermarket grips that have sharp points, these are great, with the added rail a nice option for standard frame 1911's. I have tried this on a GSG 22 and NP29 9mm and it fit both easily and securely. mounting a laser really helps my accuracy. 10/10
Recommended Products
$25.79
$ 13 .99 $13.99