Your cart is empty.
Your cart is empty.Product Description
BRAND
RIVECO is committed to improving your work & living style. Good enough is our bottom line, plus a little bit of creative thinking, to enjoy the fun of life, minimize the intensity and risk of work.
HISTORY
Since 2016, Greig and Gordon opened their workshop by a small riverside, providing comfortable and safe household tools for the neighbors, and the business expanded to every common small products, for the kitchen, garden, basement, garage, and the small studio at the back door.
THEORY
We believe in expertise, qualified materials, reasonable design, excellent workmanship are the basic requirements of RIVECO products. And then we have long been committed to improving customers’ experiences, improving every small deficiencies, and meticulously polishing to get better products. In this competitive industry, this is how we survive and develop.
We aim to provide you more than yesterday we did.
Universale Small Rack Mount Shelves For IT Equipment
Solid Structure
The four corner joints are reinforced by welding to resist loads and deformations.
Convenient Mounting Style
Two ways to install the ears to the shelf body, lips up or lips down. Lips up to prevent the device from falling off, suitable for small devices, while the lips down is suitable for installing deeper devices.
MAXIMUM AIRFLOW
Vented design speeds up the heat dissipation, keeping the equipment cool & prolonged. Cable tie holes are pre-drilled.
2 pieces of small rack shelves (flip down lip) can be installed on the rack at the same time, not only does it increase the load-bearing capacity, but it also allows for more flexible installation of various equipment, especially for heavier ones.
These rackmount shelves are ideal for various applications combined with 19” standard racks and cabinets, to hold IT devices, network routers, and stereo equipment.
J. Jones
Reviewed in the United States on March 8, 2025
These shelves went together easily and work perfectly.I used both in the lip up configuration, one for a small switch and the other to hold a few loose cables.The included hardware worked great and the finish of the entire assembly looks sleek.
jason
Reviewed in the United States on March 16, 2025
Arrived as expected. Good description. Metal slightly thinner than I hoped but great for the price.
Slippery Jim
Reviewed in the United States on February 3, 2025
These are nice rack shelves. They hold up a lot of weight without flinching. They look nice, and they have venting so there's air flow through them.Like most, they come with some cage nuts.What sets them apart a little from others is that you can mount the ears either with the lips facing up or down. Depending on your needs, this configurability could be helpful. It hasn't made a difference to me so far, but I could see how it might, especially since you can conceivably install deeper devices with the lips down.The downside of this configurability is that it's a tad more work assembling them. Not much though, it's still a pretty quick operation.
Ex-ChiefJim
Reviewed in the United States on January 3, 2025
These are a nice affordable solution to mount things that were not originally meant for rack mounting. I used these to move my Unifi Cloud Key Ultra and cable modem from on top of my rack to into it. The vent holes allow the hot air to flow up and out of the rack and also provide a nice tie down area to zip tie any cables that don't want to sit nicely in their new home.
Siddharth P.
Reviewed in the United States on January 1, 2025
This comes with 2 shelves and has good finish, doesnt feel like the powder coating might scratch and come off.The shelves have a quarter inch lip on both front and back, and would be ideal for smaller devices.Comes with rack ears and rack hardware.5/5
Paul M. Lewis
Reviewed in the United States on December 3, 2024
I bought a different brand of universal rack shelf, and it caused me nothing but heartache and bad feelings. All I wanted to do was rack mount two 1/3 space rack effects. Should be easy, right? When this set of two popped up, I ordered them. What did I have to lose?I initially bought the terrible one because I thought it looked nicer. It was a solid piece of metal, or so I thought. I didn't need any venting, and I assumed less metal equaled less solid. That being said, I wouldn't doubt this set would survive being run over by a car, while the other seemed to bend if you just looked at it. This is a solid piece of metal, as opposed to aluminum.Now on to the actual rack ears. I was weary, since I've taken chances on the server racks, instead of buying the one marketed to musicians at music shops. Most have rinky-dink screws and nuts, and never quite go together correctly. Not this one! Solid metal ears, that run the entire length of the rack, attached with machine screws and nuts on the front and back (both sides!!!), and the heads don't strip when you tighten them down with every thing you got.A nice touch is the fact that you can mount the rack either way, so your gear is sitting in the rack, with the front/back lip protecting it, or turn it upside down, if the lip would get in the way of any knobs or jacks.It might seem like I am laying the praise on a little too thick, but I'm probably not going far enough. After the emotional rollercoaster I just got off of with the last rack, It feels good to know that someone cares enough about our time and investment to build a quality product to house it in. Support this company.
jim owens
Reviewed in the United States on December 29, 2024
The setup was very simple with 2 bolts and nuts. Its functionality has helped with organisation and having a good fit. The build quality reflects its durability on holding multiple items without sagging. It looks the same as every other shelf just a little more custom.
Jay
Reviewed in the United States on November 23, 2024
Packaging wasn't fantastic. From the box everything was banging around in there with very little protection. Does come with cage nuts and bolts to put everything together.Multiple areas have bare metal exposed and the corners have wrinkled paint or powder coat unevenly stuck in there.They give you screws and nuts to put it together but just enough, No spares. I dropped one and had to get one from the store.Overall they seem robust and will do the job but quality is about average.
Recommended Products
$26.99
$ 11 .99 $11.99