Your cart is empty.
Your cart is empty.Product Description
AMG
Reviewed in the United States on March 27, 2025
This helped not only with better adhesion and lart removal, but also with bed leveling.
Mike brown
Reviewed in the United States on January 1, 2025
No problem sticking to build plate and no problem removing print when finished
MH205
Reviewed in the United States on July 2, 2024
Installation was easy on the Super Racer but no matter what I tried I could not get it to work. Hair spray, increasing bed temperature up to 80 degrees..nothing. Quite disappointing that I wasted money on two of these for two different SRs. My V400 came with a PEI sheet installed already and works great. Guess I’ll have to try the FLsun branded one.
Kayviah C.
Reviewed in the United States on November 9, 2024
I read through all the good and bad reviews. Overall, I'm pleased. I print mostly in PLA on the FLSUN and have not had any issues during 20 hours of printing time. First layer sticks well after a good calibration. Will be purchasing 2 more for my other printers. I use standard temps with and without bed adhesion (brim, raft). Pretty satisfied so far.
Hoopy
Reviewed in the United States on November 30, 2024
Hi, I had trouble understanding what this is. I have a Monoprice Mini Delta printer. FYI, putting this on the printer bed was safe. The printer's auto-leveling feature was able to detect and correct for putting this thing on the printer bed.This has 2 components. The first one is a magnetic circle with adhesive on one side. You are supposed to peel off the tape covering it and stick this down on your printer bed. The second component is the gold-colored steel print bed that you are supposed to put down on the magnetic circle. The magnetic circle is supposed to stay permanently on the print bed, and the gold print bed is only held down by magnetic force so it can be removed.I use PLA and I found that PLA does not stick to this. Maybe because I am using the wrong settings? However, if I put blue painters tape on the gold print bed then it will stick.So, it is convenient to be able to remove the gold print bed so I can attach tape or remove a print.
MarkF
Reviewed in the United Kingdom on October 26, 2024
Prints used to be difficult to get off the original base (plastic sheet stuck onto aluminium base), so kept scratching the sheet. Replacing was fairly straightforward, the hardest bit removing the old stuck on plastic sheet. Once done and cleaned (eg meths) then stuck the magnetic sticker on and the PEI metal sheet sticks to that magnetically.(it grips well, so doesn’t slide around).The PEI sheet has an extension on one side, this allows you to lift the PEI sheet off after printing.Getting prints off is much easier with this, thought the PEI doesn’t bend/flex that much.I did find that prints can sometimes not always stick so well to it, despite cleaning and trying hairspray (made no difference) as some recommend. You may find you need to increase the base plate temperature, with the magnetic pad in between it can reduce the heat reaching the surface.It looks a lot better than the old scratched plastic surface and in general works a huge amount better.This also ships from US, so may take a little time.The main downside is cost, it’s quite pricey compared to larger PEI sheets for other 3D printers eg Creality, so this and the slight adhesion problems lost a star, but otherwise moving to PEI is definitely a big improvement for this printer.
Customer
Reviewed in the United States on September 28, 2022
Super easy to install... great finish quality on the prints as well. I was having a devil of a time printing PETG on the "carbon" glass that comes with the FLSUN Super Racer. This textured PEI sheet is magic as far as getting good surface adhesion. And it just POPs off when you've let it cool. Super stoked on this upgrade. Definitely worth the money.
Eyalk
Reviewed in the United States on July 17, 2022
Very happy with this purchase.It's better than the original glass.Printing won't stick to it and easy to release.It's fits great with my flsun super racer.Recommended product
Chad
Reviewed in the United States on May 5, 2022
Over time the textured glass bed on my delta printer quit gripping the first layer well...small circles (like for through-holes in a part) almost always failed to adhere. This PEI bed solved that problem nicely AND makes part removal after printing a breeze: just flex the plate and the part pops off without any drama. As a bonus, the plate leaves an attractive (to me anyhow) subtle orange-peel-like pattern on the first layer. I like printing on this surface so much that I plan to buy a second one as a spare in case they aren't available in the future.
Recommended Products