Your cart is empty.
Your cart is empty.These risers will mount on essentially any machine that has a handlebar that measures 1 1/8 inch at the bar clamps, has open mounting area, and has enough cable slack to accommodate the risers. Here is a partial list of all the machines these risers will mount on. BMW: R 1200 GS (2012 to older), R 1200 R (2014 to older), r Nine T, S 1000 R, F 800 GT, S 1000 R Ducati: Hypermotard, Multistrada (2010 to newer) Honda: CTX 700, CTX 1300, Africa Twin Kawasaki: Z 1000 KTM: 250, 300 XC, 350 EXC / XC / SX, 450 EXC / SX / XC, 500 EXC / XC, 690 E/R, 990 Adv/Baja/Super Enduro, 1190 ADV, 1290 Super ADV Moto Guzzi: Stelvio 1200 Triumph: Speed/Street Triple (2008-newer), Tiger 800 XC / XCS (2011 to newer), Tiger 800 Street/Roadie (2011 to newer), Tiger 1200 Explorer Yamaha: VMAX, FJ 09, Super Tenere (2013 to older; newer Super Ts need this riser)
Jagannath
Reviewed in the United States on February 20, 2025
Suits well & improves well with the ergonomic
AS
Reviewed in Australia on February 13, 2025
Great fit, there was no need to fiddle with any cables. I didn't even open cable ties to fit this. Easy install. Just need to be mindful of torque settings. Haven't ridden much with it but there is a visible difference in the handle position.
william Matthew Schell
Reviewed in the United States on February 11, 2024
I purchased the Rox 2 inch adjustable risers for my 2019 Tiger 800 xrt. I wanted alittle more bend in my arm and to sit up alittle straighter. It took me roughly 15 minutes to install and make a very close first adjustment. Took bike out for a test run and was extremely satisfied with the new comfort these risers made a noticeable difference in ride comfort. Pulled over and made a final adjustment to hit the sweet spot. Rode about 20 miles and i would say if your looking to sit up more relaxed and have the bars higher, and fully adjustable to your liking,then these risers are awesome. Disregard the fact amazon says they wont fit a 2019 tiger. They are incorrect and need to do research alittle better.
chet king
Reviewed in the United States on January 25, 2021
Installed these 2” risers on my 2020 Speed Twin in less that 15 minutes. Very easy, super positional adjustments, and only required repositioning the clutch cable to the outside of the forks. Best modification I’ve made so far!
AM_BC
Reviewed in Canada on August 2, 2020
These work great. Give me an extra 2” lift to my handle bars. Easy install. On a 2017 Yamaha Super Tenere they can be installed without adding longer cables.
Ben D
Reviewed in Canada on April 2, 2019
AS expected, it help a lot on the position. Millions of possible postion ajustment.Fantastic seller.Tiger 800 XRT 2018.
Chris G.
Reviewed in the United Kingdom on September 5, 2016
Good product easy to fit
James Marks
Reviewed in the United Kingdom on August 16, 2016
The risers were of excellent quality and really 'looked' the part. My only niggle was the awkward fitting which really required a thin torx spanner to fit the lower half of the units to the original stancions of my BMW R1200gs fitted to a sidecar. The extra height gives much better control of the outfit but the proof will be in the trip around France in September. Will let you know how they help.
Sean A. Lenihan
Reviewed in the United States on January 27, 2014
Living in Australia, there are times when can be hard to come by, however, I managed to located a US distributor on Amazon. The transaction was seamless, the goods arrived as described in perfect condition and the machine quality is outstanding.I purchased these Rox Risers for my Triumph Tiger 800XC (dual sport motorcycle) and let me say, they have changed the whole dynamic of the bike. They have made a good riding experience into a great one buy giving me the ability to lift and rotate the handle bars to a height that is very comfortable. It was also important to install these Rox Risers as I'm often standing on the pegs whilst riding over rough terrain. I found that my reach to the handle bars was perfect. To sum up, this product is PERFECTI would recommend these to anyone who has a dual sport bike and is finding that they are getting those aches and pains during those long rides.
Big-D
Reviewed in the United States on February 20, 2013
Although Amazon stated "This product does not fit this machine", a 2012 Yamaha WR450F, it fit perfectly. This riser is made extremely well, the fit is perfect and it looks absolutely great. My order was shipped immediately after making it, as it arrived days before it was stated it would arrive. Great product, super strong and the fit could not be better. Looks great and it is easy to tell the construction is superb.
Ozrider
Reviewed in the United States on April 2, 2013
These risers look great, though the finish doesn't really match that of the BMW GS I was going to use them on so they stand out a bit when looking at the bike. Also, installing them was a bit awkward since the reverse torx bolts that fasten the stock handlebar mounting brackets to the forks end up being directly under the ROX risers. You will need a reverse torx wrench to get at the bolts once you have the ROX risers installed. Otherwise, they look like they will do the job....
C. W.
Reviewed in the United States on May 29, 2012
I'm only giving 4 starts because the description on Amazon is off. There is no adapter for 7/8" bars...at least there wasn't in my package. Luckily I already knew I needed the 1R-P2PP part number for the 1 1/8" bars on my Triumph Tiger 800. If you need 7/8" risers, don't buy these as there is no adapter included (even though it is shown in the picture). Just make sure you buy ones for 7/8" bars such as 1R-P2SSN.Other than that, these are a great addition. The additional height is great off road when standing, and the ability to lean them back towards the rider for more comfort for on the street is great. I highly recommend these if you have t-rex arms...or even if you are looking for a little additional height for standing while offroad.
Roger
Reviewed in the United States on October 16, 2012
Terrible product. Very difficult to put on, once you install it you can't properly tie the screws in the handle bars. Manufacturer point to a video that installs the product easily and it is not true. The cables need to be extended if not you can't turn the handlebars. It does not provide any instruction about instalation and the material can be damaged with screw driver. Very dissapointed.
Recommended Products
$106.45
$ 52 .99 $52.99