Your cart is empty.
Your cart is empty.snipehuntingforhire
Reviewed in the United States on March 21, 2025
Easy to use as long as you shake the can alot. will glue skin fast, be careful! You will run out of the glue before the activator...so you will always have a spare activator in your shop. read the directions. product will get hot upon activation.
Reviewer
Reviewed in the United States on February 28, 2025
Would not recommend this product. It expired a month after receiving it. It was difficult to open the liquid glue and it does not spread evenly.The company was nice enough to give me a full refund.
George
Reviewed in the United States on February 10, 2025
Works great
Troy B.
Reviewed in the United States on September 30, 2024
My hobby is wood turning and I use quite a bit of CA glue for patching cracks. Though I may have missed it in the description, I didn’t see anything that said if it was thin, medium or thick. After trying it out, I would call it medium. The bottle containing the glue is well made with a good cap and I have had no tip clogging. The amount of glue and activator you get for the price is terrific, and as mentioned in the title the activator cures the glue instantly with no wait time. Overall I am extremely happy with purchase and will definitely purchase again!
Fish Whisperer
Reviewed in the United States on July 15, 2024
I don't usually write much, but will here, as this stuff has really helped me to make some incredible stuff out of wood that would have blown apart on the lathe.First, i'm certain that most of these CA glues are similar as to the fluid we get, the difference is in the viscosity (thickness) and the container used. This stuff is the perfect viscosity, and the container is much better than the last two sellers i tried. The container is the most important thing, because i've yet to empty one, due to it somehow getting air.No fancy, ultra fine nozzles with this one, just a good cap that seals every time on a thick plastic container. I might just see the last drop.Second, this glue absorbs into the wood as well as thinner glues, and will do so until it's filled the void up to 1/4" below it. I do this without using the activator. I've added more glue 4-6 times on the same crack, in one go, and found the crack full of glue 1/8-1/4" down. One of my pics shows this. The others show how "osmotic" it is.Third, this is the best per oz cost for this stuff, with or without activator, especially when considering i might get to use all the oz i purchased. YMMV.Hope this helps another relative newb like myself. FTR, I'm working on a 7"x3" bowl from a 50yo piece of Bubinga. This glue is helping me to consistently produce turning blanks that have safely been used to create true works of art. See pics. God is the artist; i am just revealing the art with a lathe. Happy woodworking all!
Jennifer
Reviewed in the United States on December 22, 2024
Once you open the glue just know it's like watter and messy. Works well but it's impossible to put the lid on and re use it.. I cut lid off to use it a 2nd time.. so glue works well. Runs though. Tricky .. if it was gel and I took time to clean up tip well and store upright (falls over with lid on it will glue itself to an oak cabinet. Lol ) it would be gold.
scott
Reviewed in the United States on November 11, 2024
i was looking for something like this for gluing 3d printed parts together. i know the description says plastic but i couldn't find any reviews or anything that say specifically plastic (PLA) 3d printed parts. most of the reviews i saw were for wooden objects. So since description says plastic i got it and tried it. Been thrilled with how it works! its pretty much an instant bond and theres not holding it for 5+ min trying to wait for the glue to set. this stuff glue on 1 side accelerator on the other and press together and literally 3sec later you can let go and its stuck! now the glue will harden the longer you set it aside but you can release it after 3 sec and it wont slip apart. super pleased with it.** the only down side to this is the accelerator does have kinda a strong smell so i would take that into account if smells bother you, either use it outside or in well ventilated area. other than that works great!
dfzn
Reviewed in the United States on October 26, 2024
Good product but the glue bottle is not so much. I normally use Bob Smith industries brand CA glue but I wanted to try an aresol activator. It is a good glue system & works as intended, but after first use the lid seals itself to the bottle. By the 2nd or 3rd use you will need 2 pairs of pliers to remove it, likely tearing the spout off with it. If the lid sealed properly it would be 5 ⭐️I'm looking into other applicator bottles to transfer it into
Recommended Products