Your cart is empty.
Your cart is empty.
Sierra International 35-SS635 Marine-Grade Stainless Steel Panther Safe-Skeg for Evinrude/Johnson 90-100-115-120-140 HP, 2-Stroke, 1980 to 2001 AND OMC I/O 4-Cyl Cobra, 1986 to 1994
Whether you’re looking to protect your new skeg, repair your damaged one or just want to add some shine, Sierra’s Panther Safe-Skeg’s 316 Marine-Grade Stainless Steel Construction is brilliantly polished and installation takes only minutes!
Sierra offers a full line of Ultimate Skeg Protection and Repair.
ADDITIONAL DETAILS
• Offers 316 Marine-Grade Stainless Steel Protection
• Brilliantly Polished with a Seamless Design
• Contains a Drain Hole to Protect Against Corrosion and Freeze-Up
• Installation Takes Only Minutes
• Material Thickness: 1.5mm (50% Thicker than the Competition)
• Skid Plate is Not Necessary due to Extra Thickness in the Safe-Skeg Material
• Kit Includes: Safe-Skeg, Mounting Hardware, Instructions, Allen Wrench and Loctite 262
APPLICATION INFORMATION
•Designed to Fit:
OMC Inboard/Outboard – Cobra 4-Cylinder Drives from Years 1986 through 1994
Evinrude/Johnson Outboard – 90-100-115-120-140 HP, 2-Stroke from Years 1980 through 2001
ABOUT SIERRA
Sierra is dedicated to protecting you and your investment. For 50 years Sierra, one of the most trusted names in the marine industry, has proudly been offering high quality engine and drive parts. Their products meet or exceed the original equipment part it replaces and are engineered to meet today's high horsepower engine demands while withstanding the harsh marine environment.
SIERRA'S CUSTOMER SATISFACTION WARRANTY
All Sierra parts qualify for Sierra's Industry Leading Customer Satisfaction Warranty. Sierra warrants its products to be free of defects in workmanship and materials for the useful life of the product. If a Sierra product fails to comply with the warranty, Sierra will repair or replace the defective product free of charge. The warranty is subject to additional terms, conditions and limitations. You can view Sierra's full warranty located above in the Technical Specification Section.
jackie jakubowski
Reviewed in the United States on September 10, 2023
This was really easy to install and had a good clean, tight fit. Looks natural once installed.
Michael Assad
Reviewed in the United States on July 28, 2023
If you’re running in shallow water and have wear, this works great. Look’s awesome and easy to install, as well.
mike
Reviewed in the United States on July 17, 2023
Worked great, fit was perfect, and it was easy to install. Looks sharp as well.
Hootie57
Reviewed in Canada on June 28, 2022
Solid piece to help repair my Skeg after we had found some “hard water” during the last trip out. Fitment was a little off but made a few small modifications and seemed to work well. I’ve used a lot of panther products in the past and they’ve never disappointed
Sly
Reviewed in Canada on July 29, 2021
Good quality P.S. Give it a little cleanup on the inside edge with a metal file as it is a little sharp. It will scrape the paint as you mallet it up. Clean appearance and looks like performance accessories to you engine/drive. I also drilled a second drain hole 3/16” at the bottom front. Taking the boat out the water with the engine up, a good amount of water would stay inside that may cause some corrosion with time. Use a center punch to avoid the drill bit to run away during the drilling process.Please people… I keep answering “will it fit my motor? “ Go to Safe-Skeg site. Open the PDF file and find your specific year model and size to get your specific Part Number. Then go back to Amazon and double check.
Customer
Reviewed in Canada on November 9, 2021
After nasty accident with underwater rock there wasn't much left from my 2000 Johnson 115 skeg.Safe-Skeg was a quick and cost-effective way to bring the boat back to water.
Martin
Reviewed in Canada on May 31, 2020
Great looking unitCan't wait to install
Steve Mitschke
Reviewed in the United States on February 20, 2020
Original skeg was bent so bad it took constant pressure to run in a straight line. Let go and make an instant leftturn! Don't know how you can bend aluminum that far without snapping it off. Anyway, had to cut all but 4 inches of it off or buy a whole lower case. This was the answer. Easy to install and the boat now tracks "no hands" straight.Stainless durability speaks for itself. Like any skeg, avoid rocks, boat ramps, skis and trees etc.
Jacob Corea
Reviewed in the United States on July 29, 2019
Nice product and helped the handling on my outboard tremendously. I have a 76 mercury 1150 115hp outboard and this fit perfect I don’t think they label this for the outboards just the I/O units but the lower unit on both must be pretty much identical because this fit my outboard perfectly and Looks classy to and super easy to install. The reason I got the panther was because they were the only ones that had dimensions available so I could double check that it would fit and seemed like an expensive gamble to take with out anything to back it up
dave l..
Reviewed in Canada on November 2, 2019
Found a rock in the lake which I didn't want to find with my boat motor and lost half my skeg all fixed with this safe skeg and no-one can tell the difference
Mitchell
Reviewed in the United States on September 9, 2018
Haven't actually put it in the water yet but the installation was a breeze with all the right tools. Directions are clear and well put together. Seems like it's pretty durable with a nice chrome finish.
B. Lund
Reviewed in the United States on December 4, 2016
These fin "sleeves" are all a repair part. None will be as good as the OEM cast fin... But this one is pretty good. Slip it over you old stub of a broken fin/skeg and drill the mounting holes. Rough up your old stub and slap some JB-Weld on both sides, slip this on and bolt it down.It'll stay and it'll get some of your slow speed steering back, help with tracking, etc. What else do you want?Only other fix is a welding shop and new metal ...
noah
Reviewed in the United States on April 27, 2016
It did not fit my application like stated. It also chipped and scratched the paint. No alternative than to return for a refund.
Recommended Products
