Your cart is empty.
Your cart is empty.Product Description
Single Mode LC WDM Single Fiber Bi-Di Gigabit Media Converter - Built-in Fiber Module 20km (12.42 Miles) Simplex – to UTP Cat5e Cat6 10/100/1000 RJ-45
Extend your Gigabit or Fast Ethernet Network Over Single Mode Single Fiber Up to 20 km (12.42 miles) using 1310 / 1550 nm & 1550 / 1310 nm With Ease
AN-UM-SMC-AS-J + AN-UM-SFP-SM/WDM/1310 (1550) -20/D Singlemode Single Fiber Media Converter Will Automatically Detect 10 Mbit/s or 100 Mbit/s Fast Ethernet or 1000 Mbit/s Gigabit port
You just need plug in the cables and it will work right away!
Powering it up?
Easy, it will come with an AC power adapter in the set, just plug it in!
Sturdy, Stable, and Easy To Use
- Supports Jumbo Ethernet Frames up to 9000 bytes (if needed, configurable by dip switches);
- Supports QinQ and VLAN's - MTU size big enough to pass them through;
- One 1000Base-LX Single Mode Single Fiber port Port with LC type connector - up to 20 km (12.24 miles) distance using 1310nm/1550nm wavelengths (only 1 fiber strand needed between units!)
- One 10/100/1000Base-T RJ-45 port Autosensing featured - adapts to all 3 speeds!
- Compliant with IEEE 10/100/1000Base-T and 1000Base-LX WDM BiDi
- Connect RJ-45 UTP copper port to Gigabit or Fast Ethernet ports or even legacy 10Mbit/s ports - all will work!
- When used standalone (paired with other devices), be sure to check that wavelengths match - and A side is used on pairs with B side - WDM technology to successfully utilize 1 fiber strand for full duplex communications requires A side to be working on 1310nm/1550nm and B side with 1550nm/1310nm. Double check this before you install the units!
Versatile Protocol & Features Support
- Status LED indicators for Power, Link/Activity, Full-Duplex, and Speed
- Standards: IEEE802.3z/ab 100/1000/1000Base-T 1000Base-LX WDM BiDi
- Transmission Wavelength – 1310 nm /1550 nm & 1550 nm/1310nm Fiber Connector Type: LC Simplex PC/UPC
- Power supply: 100 to 240VAC 50 to 60Hz
- Dimensions: 70.5mm - 2.77in - (L) X 94mm – 3.7in (W) X 26.5mm – 1.04in (H)
- Environment: Relative humidity; 5% to 90%
- Operating temperature: 0 to 70 degree Celsius (32 - 158 F)
- Supports LLF feature - Link Loss Feature - (if needed, configurable by dip switches)
More Features, More Convenience and Peace of Mind!
Setup of these units are really easy as the 3 steps shown in picture gallery - all default settings will work for all of your cases, but if you can turn on/off LFF feature or Jumbo frame - do it!
While in most cases you will have LAN switches, WiFi routers, or regular PC's connected to media converter UTP port - this versatile converter will still work with any standard Ethernet port device!
Scale Up Your Network as You Grow!
Autosensing 10/100/1000 Gigabit Ethernet port auto adapts to Fast Ethernet speed device as well.
BONUS!
+ you get free wall mount ears and rubber buttons in set!
kevin kwok
Reviewed in the United States on September 11, 2021
not sure it is my fiber cable issue or what. we tried to use this one directly connected to the one of the fiber cable but totally no signal.if we connect the original 2 cables to the bi-converter and it works well.we try to make one fiber connection into 2 but not working at all.
Tim
Reviewed in the United States on May 31, 2021
Great product have gig ethernet to the barn now and no worry about lighting any more.
Dale Maxwell
Reviewed in the United States on March 29, 2021
I needed to send data between two computers through a connection that was a bit less than 200' apart. The WIFI signal wasn't adequate as it often dropped the connection. Purchased a 200' ethernet cable, however the connection worked at times, then at others it didn't. Purchased a couple of ethernet booster devices that didn't solve the problem.Purchased this with enough fiber optic cable to reach. I did have to purchase a different version of the piece that the cable clipped into. The one that came with this is designed for a single strand and what I'd purchased was a double.I hooked everything up with the two computers side by side. The connection still ran through the entire length of the fiber optic cable, so this way I could see if it would work without unspooling the cable.Bingo, it worked. Still I didn't tuck the cable out of sight yet until I'd made sure that it worked in the operational capacity. It did and so now the cable it tucked out of sight, mostly, and I have the operational capacity that I needed.
Dave
Reviewed in the United States on February 3, 2020
i used this for extending a 10 meg ckts across walmart that was about 900 ft. not one problem. however the power cord from the brick to the wall is only 6 inches.that was a issue.
Michael Lomax
Reviewed in the United States on November 5, 2020
I like the mounting hardware for wall mount applications.Could use rubber feet for bottom.
CountryF
Reviewed in the United States on January 3, 2020
Great, simple and fast. I had a job that had single-mode fiber (1 strand) ran to another side of the property and wasn't sure what to use as I've always seen fiber with two pairs. Well luckily i found this little guy, super simple one on each end, plug them in and that was it. Allowed me to use this old line to put an AP way back vs doing wireless repeater. Speeds on the wireless went from 8mbs on repeater to 85mbps!Super simple - Plug in, lights come up in a few seconds.Only needs 1 strand - You could use this if you have 2 strands, just buy two sets and then each strand could be a different network or linkReliable - I only used it for 3 months, during that time I never had to reboot it or anything. Only took it down because someone broke the fiber line. I've still got the unit and will use it in the future if i ever have the need.
c a strawn
Reviewed in the United States on September 27, 2019
Out of the box hooked up and powered up and it worked. Internet flowed in 10 seconds later, Working as a isolator Not one error, still going strong
AJ Whitney
Reviewed in the United States on December 23, 2019
Needed a good way to run a high speed network connection to my garage from the house and these worked perfectly when paired with a 30 meter length of single mode fiber. This might be a bit of overkill, but it works great!
Recommended Products
$299.98
$ 99 .00 $99.00