Your cart is empty.
Your cart is empty.Product Description
- Specifications:
- Product Name: Preciva 8 in 1 wall stud finder
- Color: Orange & Black
- Material: ABS Plastic & Metal
- MODEL :T30
- 6 Scanning MODES:
- AC MODE
- Metal MODE
- Magnetic MODE
- 0.5inch STUD DEEP MODE
- 1inch STUD DEEP MODE
- 1.5inch STUD DEEP MODE
- 2 Functions:
- Ruler Function
- Level Function
STUD MODE
- If you are not sure about the depth of the stud,
- Please measure from shallow to deep 1/2"/1"/1½" (12/25/38mm)
- In order to better obtain the data you need.
METAL MODE
- Metal pipe mode could detect metal in walls to a depth of 2.36 inches (60mm).
AC MODE
- The AC line mode can detect to a depth of 2 inches (51 mm).
- For safety, this wall scanner always detects and indicates live AC lines in all modes
MAGNETIC MODE
- The magnetic mode can detect to a depth of 0.4 inches (10 mm).
- Stud finders are equipped with modern electronic detection as well as traditional magnetic detection.
- The combination of both modes can help you detect studs accurately.
WAY TO CALIBRATION
- Press MODE to turn on the machine, switch to the stud mode, put it on the wall to be tested for calibration, after hearing the "Bl" prompt, it means that the calibration has been completed.
- if you need to change another wall for measurement, you need to re-calibrate once);
- in AC/Metal mode, PLEASE put it in air for calibration
SCANNING THE WALL
- Move the stud finder slowly along the wall,
- if you accidentally shake or lift the scanner, the device will need to be recalibrated.
FINDING THE CENTER POINT
- When the signal bar on the screen shows CENTER and the buzzer is the loudest,
- it means you have found the center of the object.
- Mark it with a pencil.
- Package list:
- 1x Wall Stud Scanner
- 1x 9V Battery
- 1x User Manual
Rodrigo
Reviewed in the United States on February 15, 2025
Ok
CrazyCatMan
Reviewed in the United States on June 16, 2022
No bells and whistles, perfect center isn't always exact, but works well. Not sturdy enough to be used in construction but works for a regular schmuck like me.
Customer 1024
Reviewed in the United States on January 7, 2022
Had high hopes for the Preciva Wall Scanner Sensor -4 in 1. I am an engineer with over 40 years of electro-mechanical experience. I have used numerous stud finders in my life but this one is the worst. I had some book shelves to install so thought I would give this a try. Read and followed directions. I tried the "stud" setting first and after several sweeps of not finding anything (Yes, I did calibrate in a known dead zone, and no, I did not move it away from the wall after calibration. Yes, I did keep the button pressed the entire sweep), it started giving some readings that I marked with a pencil. Some were only a few inches apart. Many were scattered over the wall. Next, tried the deep setting. Well this found different locations for what it thought were studs. Finally decided to try the metal setting, hoping it would find the drywall screws. Again it "found" several but nowhere near the "stud" or "deep" locations. After 20 minutes I had about 30 markings on the wall, some near each other (within a 5" circle) many no where near each other. Finally went down to the fridge and grabbed a neodymium magnet my wife used for holding pictures. It found all the drywall screws in about 5 minutes, all in rows indicating stud locations and also no where near any markings the "Preciva Wall Scanner Sensor" though they were. This piece of junk is going back.
Pacific NorthWest
Reviewed in the United States on September 22, 2020
Seems like a decent stud finder. My main beef is I'm always skeptical when I receive an item that is not in a factory sealed box, andor item does not have obvious signs of being new. Such as lensdisplay protector screen or the such. Did I just get sent a usedreturned item that I paid new prices for?Found rafter in ceiling easily enough, did some quick testing with the AC mode, only way I got a hit was when I scanned external wire to device. Metal mode seems to work decent enough.
Pleasant Valley Sunday
Reviewed in the United States on September 14, 2020
I bought this because I didn't trust the results coming from my Zircon detector which was picking up studs where there were none. This one takes a moment to calibrate before offering a reading and is very accurate. The ability to find the center of the stud is my favorite feature. Unlike a lot of bargain electronics, it comes with very thorough written instructions which are worth reading.
the Amp
Reviewed in the United States on June 8, 2020
I tested this unit a few days ago. It found a wood stud, no problem, and appears to show me the edges and center of the stud as well. I have not yet used it for a project (haven't drilled in to the stud after finding it) but I assume it's showing me the correct place; I'll update if I ever find out that it's wrong :)Wood stud - foundAC power source - foundMetal stud - I don't have these in my home, so could not test.Tip for use - check the instruction manual to make sure you are holding it the right way while you scan the wall. It only works reliably if you use it correctly.
Jay
Reviewed in the United States on February 15, 2020
It's simple and works well. Beats out the Stanley one that was on it's last leg when I got this one. Seems to be fairly accurate, and I was impressed with the quality of the instructions. I'd definitely recommend it to others. My only complaint so far is that I wish I could turn off the indicator buzzer, it's helpful, but I wish I had the option to turn it off.I was asked to evaluate this product for a fair review.
ChrissyB
Reviewed in the United States on April 17, 2020
My old stud finder finally died. I'd had it since the 1980's and I thought it worked pretty good. Now that I have this new stud finder I wish I had bought something like this a lot sooner. I've tried all of the settings and I find this to be very accurate. I just used it so I could mount a fire extinguisher, which is very heavy. I needed accuracy so I could get all four screws into one stud and it worked as advertised. What else can I say about this stud finder? It's easy to use. It is very accurate. And unlike another user that condemned this as poorly built and that he had to wait a few seconds for it to calibrate itself, I really like it. He should have returned it for a replacement if he had a problem. However, some people are never happy. He even knocked it because it is purple? Really? I like the purple color. It doesn't clash with the colors of any of my rollaway tool boxes, LOL. That in and of itself is a good indicator that that guy is never going to be happy. Anyway, I am very happy and I am going to buy one for my son and my son-in-law. Just buy it and try it. You will like it.
うし
Reviewed in Japan on September 7, 2019
引っ越し先でどう見ても石こうボードの間隔が分からず購入 大体の所の中木が分かるが失敗も 電池の予備が無いのでなんとか出来ました 予備電池を用意しとけば早いと思います。
(株)龍旭インテリア
Reviewed in Japan on March 19, 2019
ふだん ボード解体をした時 何処まで剥がすか 軽量のスタッドを何処にあるか 分からない いつも大きく解体しました。余計な手間を使っちゃう これあると 軽量をどの辺にあるか すぐわかる いいですね
長田知奈美
Reviewed in Japan on October 30, 2019
レビューで評価されている程、使い易くも無く役にも立ちませんでした。僕の使い方のせいでしょうけどま。
Recommended Products
$28.40
$ 13 .99 $13.99