Your cart is empty.
Your cart is empty.Product Description
stud finder wall scanner
Whether you are hanging pictures, putting up a new set of shelves or getting ready to start an addition, knowing where the studs are in a wall can be extremely handy! And A good stud finder can be the difference between a successful DIY home project and disaster. That is why a stud finder is important.
JAXWQ stud finder uses UPGRADED SMART SENSORS which can sense the change in density in the space behind the wall and locates the stud center with GREAT ACCURACY. You will not worry to drill many error holes on the wall while putting up a TV bracket, shelf unit, or even just a set of coat hooks on drywall.
Stud Scan Detection
This stud locator has 3 stud scan modes. Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in the 0.5in. or 1 in. StudScan Mode first.
After you detect the center of an object, Please Use Metal Scan to determine if the reading in Stud scan mode was a wood stud, metal stud, or pipe.
Metal Scan Detection
JAXWQ wall detector can locate metal studs in StudScan mode, DeepScan mode, and Metal Scan Modes. Since JAXWQ stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.
Wire Warning Detection
Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detects and indicates the Live AC Wire.
Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.
Step 1: Calibrate the tool before every scan
Place the whole device against the wall, then press and hold the calibration button( on the side of the tool) to calibrate this tool. Wait for the reducing bars to disappear and beep to confirm calibration has been completed.
Note: In stud/deep mode, put it on the wall where you want to detect to calibrate it; In AC/Metal mode, put it in the air to calibrate it.
Step 2: Scan the wall
After finishing calibration, please release the calibration button. Then move the stud finder along the wall slowly, if you shake or lift the scanner accidentally, the device needs to be re-calibrated.
Step 3: Find the location of the stud
When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object. Mark it with your pencil.
Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang the thing.
footprints
Reviewed in the United States on March 3, 2025
Easy to use, accurate
Even Handed
Reviewed in the United States on February 7, 2025
I have used this stud finder a few times since buying it probably 3 months ago (as of Feb 2025). It has worked exactly as I expected it to. I'd never used a stud finder before, and this was just going to be used around the house. This finder seemed to find the dead center of the beam I was wanting to anchor to. It emitted noises when it found center, and the design of the top of the finder make it very easy to mark the spot with a pencil. I would highly recommend it for the price (I paid $20 in Nov 2024). Honestly a great deal at that price point. It seems to be pretty sturdy / solidly build, so I anticipate being able to use it for years to come.
T. Boadicea
Reviewed in the United States on February 24, 2025
Nice but complicated to use.
Ann Murray
Reviewed in the United States on February 18, 2025
Very disappointed in this item. It does not work!
Customer
Reviewed in the United States on January 8, 2025
Bought this to replace my old one that I've had for 20 years.No frills, but it works well enough. Old one only found "close" to the edges, and you had to approximate. This one finds dead center fairly well, no guess work. If you want one better-be prepared to spend $200. Great for homeowners/handyman that has some knowledge and is looking to hang artwork, TV mounts etc.Does what it says it does.
Ellon Nixon
Reviewed in the United States on January 28, 2025
Worked perfectly as it was supposed to
Customer
Reviewed in the United States on December 30, 2024
This stud finder can be made to work under ideal circumstances, but it is complicated and unreliable.
Ehsanbaz
Reviewed in the United States on October 5, 2024
I already tied another device which was not good at all butthis was find stud with acceptable precious. just my issue is it take time to get calibrated
Recommended Products