Your cart is empty.
Your cart is empty.Product Description
3-Jaw steel chuck
Drill pin vise has a 3-jaw steel chuck
Ergonomic Design
The ergonomic design will make your DIY job enjoyable. It's so comfortable to use it.
Suitable for different shapes
Oval
Square
Irregular
Wide Application
For Wood
For Amber
For Jewerly
brian nally
Reviewed in Canada on February 6, 2025
I have used these bits and the work great. There is a fine selection of bits to chose fromee and the little vice was quite handy to have. I recommend this product.
Mikemisat
Reviewed in Canada on January 23, 2025
For the price, I really didn’t expect anything too great, which was fine given my very limited reason for buying this drill. As expected, the vice is flimsy, and the drill handle feels a little sloppy, but it came with extra bits which I didn’t expect, and for less than $25, there’s little to complain about. If you have a serious need for a small drill, you may want to go for a higher quality item, but for the occasional user, I recommend this drill.
jacques duret
Reviewed in Canada on June 26, 2024
treas facile a utilise
Lois
Reviewed in Canada on May 14, 2024
If you were looking at doing really big jobs with this, then you are going to need to find something else. This is for small crafts either would or clay or plastic or something that you can use with your hands. I was amazed at how compact and how easy it fit into my hand. I don’t have big hands. I have a small wide hand and I didn’t have any problems having it fit into my hand. All the little drill bits that they have in the vice For you to use is absolutely fun to use.What I recommend people get it if they’re looking for something inexpensive and easy to use and fun with a little bit of a challenge and know how to use it? Yes enjoy the adventure.
Cynthia in Arkansas
Reviewed in the United States on March 5, 2024
I was pleasantly surprised at how nice this set was. It is a great set that works well and has a container for all the bits. I use this mainly for craft work and it is perfect for very small/fine drilling into crafts, models, etc. Highly recommend.
Glenn Partridge
Reviewed in the United States on March 28, 2024
I recently acquired the Hand Drill Bits Set for my crafting and model-building endeavors, and I’m thrilled with its performance. Here’s why this set stands out:1. Comprehensive 60-Piece Set: This kit includes everything you need for precision drilling. It contains: 10 PCB mini drill bits (in random colors) 1 mini-pin vise 1 bench vise 48 twist drill bits in 26 sizes (ranging from 0.5mm to 3.0mm)2. Bench Vise for Easy Fixing: No more struggling to keep things steady while drilling! The SUNJOYCO plastic bench vise comes with four screws that securely clamp square, oval, round, and irregular objects. It’s a game-changer for delicate work.3. Jaw Chuck Design: The compact bench vise features a 3-jaw chuck design, allowing easy rotation to clamp drill bits within a range of 0.2mm to 3.4mm. Its dimensions (approximately 4.3 x 2.4 x 1.4 inches) make it convenient to store when not in use.4. Durable & Ergonomic: Crafted from high-quality aluminum alloy, this hand drill is built to last. Its anti-slip design ensures comfortable handling. Just remember that the twist drills are sensitive to very small diameters, so choose the correct size and avoid excessive force.5. Versatility: While I’ll be using it for scale models, this set is suitable for a wide range of hobbies and crafts. Whether it’s woodworking, jewelry making, or DIY projects, the Hand Drill Bits Set delivers.6. Affordability: Not only is it less expensive than other models, but it also comes with more accessories. The little vice included for small parts is a thoughtful addition.I’ve already saved this seller’s store because I’ll definitely be visiting again. Kudos to SUNJOYCO for creating a reliable and versatile tool!
David Despain
Reviewed in the United States on December 9, 2024
used for watchmaking. pin vise is useful for holding the crown stem while cutting and sanding and assembling the crown to the stem. seems decent enough, especially for the price. i probably won't use the drill bits for watchmaking.
D. R.
Reviewed in Canada on October 16, 2024
The assorted drill bits are quite dull and low quality. Okay for soft materials but nothing more.
Wilson W.
Reviewed in the United States on January 31, 2024
WAST OF MOMEY. Bits are weak small bits are flat. You can’t start a hole without a tip. Drilling small hole after I finally got it start and it bent. Vise is difficult to screw in and out it turns good for a few turn then starts the only word is that it has the felling it wants to strip. I’ve been work on trains for a hobby for 14 years this is by far a WASTE OF MONEY no matter how much it cost. I did try with patience but to no avail. Maybe it was Just the set I got. I don’t know. I DONT UNDER STSND HOW A SET IS LIKE THIS. The vise, drill bits and I didn’t even open the hand bit holder and rotator. May some people got a better set. But flat head drill bits. Every TOM, DICK AND HARRY KNOWS drill bit need a point to help start the hold or it moves around where you want to drill in many many cases that hole need to to be right on especially at start. I don’t usually leave these things but this time had no choice
William Robins
Reviewed in the United States on October 7, 2023
I purchased this kit to help with my 3d printed product assembly. I specifically purchased this kit due to the size variation of the drill bits and it seemed to meet what was advertised. Though a note on this, the bits are not marked with sizes, so having a micrometer is necessary. The pin drill is made of aluminum and seems to be a decent quantity, though I did have lubricate the head to spin easier. After sharpening the bits, they drill much easier and faster, but before I sharpened the bits, you really had to press down with some force and they still weren't drilling that well. Overall, if you have a way to sharpen small bits, this is a great kit for the money. If Not, this is definitely something to keep in mind before purchasing.
Travis S. Bryan
Reviewed in the United States on December 3, 2022
Not sure if they are supposed to be dull or not but the bits barely drill thru plastic. But it is still a good value for the price
Anthony
Reviewed in the United States on December 13, 2022
It looks and feel ok but all the bits are just thrown in a bag with no labels or any way to tell the size of said but. I’m a bit anal about being this organizational stuff so if it doesn’t bother you then this looks pretty decent. Over all it works pretty well just a bit upset with the whole no labels/organization thing but again that’s just me.
Ylushtak
Reviewed in the United States on February 9, 2021
The smaller bits are useless: some have almost no thread, none have tips, some are bent. They cut about as well as metal rods with no thread. The drill itself works (with a bit from the hardware store and after applying WD40) if a bit small and not very grippy (has to be tightened constantly) but, without functioning bits, this is a useless purchase.
Recommended Products