Your cart is empty.
Your cart is empty.Product Description
-
11.0 lb / 2.2 lb
SuperFast 8K Clear
[Fast Printing] Printing 50um layer in 0.5 sec with monochrome LCD 3D printers, saving on time and electricity bill
[Water Washable] The printed products, platform and resin tank can be easily cleaned with warm tap water and soap
[Deep Black and White] Deep black and solid white with SuperColor high concentration pigments
[8K Precision] Extremely low viscosity allow for high-resolution 8K 3D printing of objects at high speed with 22um resolution
-
11.0 lb / 2.2 lb
SuperFast 8K Grey
[Fast Printing] Printing 50um layer in 0.5 sec with monochrome LCD 3D printers, saving on time and electricity bill
[Water Washable] The printed products, platform and resin tank can be easily cleaned with warm tap water and soap
[Enhance Productivity] Super fast printing enhance the productivity of 3D printing by at least 40% and up
[8K Precision] Extremely low viscosity allow for high-resolution 8K 3D printing of objects at high speed with 22um resolution
-
11.0 lb / 2.2 lb
SuperFast 8K Black
[Fast Printing] Printing 50um layer in 0.5 sec with monochrome LCD 3D printers, saving on time and electricity bill
[Water Washable] The printed products, platform and resin tank can be easily cleaned with warm tap water and soap
[Enhance Productivity] Super fast printing enhance the productivity of 3D printing by at least 40% and up
[8K Precision] Extremely low viscosity allow for high-resolution 8K 3D printing of objects at high speed with 22um resolution
-
11.0 lb / 2.2 lb
SuperFast 8K White
[Fast Printing] Printing 50um layer in 0.5 sec with monochrome LCD 3D printers, saving on time and electricity bill
[Water Washable] The printed products, platform and resin tank can be easily cleaned with warm tap water and soap
[Enhance Productivity] Super fast printing enhance the productivity of 3D printing by at least 40% and up
[8K Precision] Extremely low viscosity allow for high-resolution 8K 3D printing of objects at high speed with 22um resolution
-
11.0 lb / 2.2 lb
SuperValue Grey
[Ultra Low Cost] The world's lowest cost 3D printer resin Made in Korea
[Low Viscosity for 16um Precision] Very low viscosity for extremely high-resolution 3D printing
[Compatible to All LCD Printers] Compatible for all kinds of LCD 3D printers
[Low Shrinkage & Toughness] Formulated by low shrinkage oligomers and tough monomers
-
11.0 lb / 2.2 lb
SuperValue Clear
[Ultra Low Cost] The world's lowest cost 3D printer resin Made in Korea
[Deep Black and White] Deep black and solid white with SuperColor high concentration pigments
[Low Viscosity for 16um Precision] Very low viscosity for extremely high-resolution 3D printing
[Low Shrinkage & Toughness] Formulated by low shrinkage oligomers and tough monomers
-
WORLD FASTEST 3D PRINTING RESINS
A 0.5-second print takes only 4.8 hours. SuperFast increases print speed by 60%.
The SuperFast series offers a curing time as short as 0.1 seconds depending on LED intensity, with a 22μm resolution. This advanced photo-curing system saves 60% on electricity costs by reducing total print time. Additionally, SuperFast extends the lifespan of the LCD panel, the most expensive part of a 3D printer. Since SuperFast requires only 1/4 of the UV LED exposure time compared to other brands' resins, it can theoretically extend the LCD panel's service life by up to four times.
RECOMMENDED LAYER EXPOSURE SETTINGS FOR 3D PRINTERS
These settings were measured and tested for a 50μm layer thickness. Adjust the exposure time by ±15% based on your printer's conditions. Colored prints were tested using the recommended number of pigment drops per 100mL of clear resin.
S. G.
Reviewed in the United States on January 7, 2025
I am using a Saturn 2 8K system. Still fine tuning the settings, but the smallest opening I can print is 0.2mmThe material has a yellowish hue and is flexible like hard rubber. I have not tried to sand it clear yet. Water cleans it. I have also used IPA with similar results. Once I get my settings dialed in, I think this will be a great addition to my materials list. Currently with settings (0.05 mm layers), slow lift and set with 1 sec delays. 5 layers of transition, 4 base layers, 10 sec base layer, 0.75 sec reg layers. Hope this helps.
cristiano
Reviewed in Italy on January 29, 2025
Occhio alla temperatura con il freddo non riesci a stampare
D Smith
Reviewed in the United Kingdom on September 4, 2024
- Very quick resin, less half the exposure time of other resins (though it said 0.6, 0.8 was what I used for my Mars 4.- I thought it'd be brittle, or poor quality but it is very good. Good flex before breaking (I stress tested to destruction.)- It is water washable, but can leave a slight film (just like others) so I quick dash of soapy hot water sorted it right out.Considering it's clear, fast and water washable, I thought there would be significant trade offs. I was completely wrong. It's great stuff.
Eric rode
Reviewed in France on July 11, 2024
Soit je suis tombé sur une mauvaise série, soit cette résine est nulle.... Je n'ai réussi aucune impression. De plus, la résine est censée être transparente mais après séchage, elle devient jaune...Très déçu de mon achat, c'est la seule résine qui m'a posé des problèmes comme ça.
Decocriwi
Reviewed in Spain on October 29, 2024
Aunque el olor es fuerte, buena resina
Brendon M
Reviewed in Canada on January 9, 2024
Not overly water washable but I read that in the reviews already. Good for the price when I purchased it.Would recommend for decorative pieces, not heavy use parts.
Recommended Products
$268.99
$ 99 .00 $99.00