Your cart is empty.
Your cart is empty. WHAT'S INCLUDED IN THE V2 KIT?
*Modular Joystick Body - The OTTO DIY modular body replaces the existing body found on the Sanwa JLF TP series joystick lever, and used for both the V2 (Korean style) and V5 (JLF Upgrade) kits. It houses the core attachment, plus the original TPMA microswitch PCB or Hori microswitch PCB.
*FD Replacement Square Gate - This replacement square gate has a rounded area around the corners, allowing the top portion of actuator to sit comfortably while still defining its corner.
*BYD Replacement Rounded Gate - Those desiring an octagonal gate may consider this a worthwhile alternative. The gate increases the rounded edges around the corners, producing a more circular feel during play.
*12mm, 12.5mm, 13mm Oversize Actuators - the actuator is used to activate each microswitch plunger, with the 12.5mm and 13mm actuator designed to shorten the distance between the actuator and the plunger and speed up actuation.
*Grommet Core and Cap - The grommet core is made of a smooth teflon material and connects to the modular body. The cap sits atop the core, grommet and bobbin, helping to keep everything together.
*Tension Grommets and Bobbin - These two elements represent the unique aspect of Korean levers, which use a silicone rubber tension grommet in place of a spring. You will receive two tensions - 40 Shore A and 60 Shore A - with the kit. You can also purchase additional tension grommets with the kit.
*OTTO Stability Spring - while the V2 kit uses a rubber tension, the additional spring adds some balance for a joystick lever that normally relies on a spring.
*Screw and Nut Set - gold plated screws replace the existing screws used to mount the Sanwa P-1 plate or Hayabusa plate. To install the screws, you will need a 2mm hex key.
Anthony Martinez
Reviewed in the United States on November 4, 2024
Absolutely great mod, exactly from what I was looking for, a Korean feel without missing out on the diagonals from a Japanese lever, it feels great and was quite easy to assemble as well. Hardest part was unscrewing the sanwa plate but that's more of a sanwa issue than this. Only thing to be aware is to get a a 2mm hex screw (not included) and maybe some grease or keyboard lube as this kit doesn't come with one, but that's all personal preference! It feels great and smooth out of the box without it!
Milesy
Reviewed in the United States on August 2, 2023
There was old used oil in the actuator as well as the Allen wrench missing and lubricant missing. It’s a great kit when you finally get it on though.
Anthony Nemard
Reviewed in the United States on October 22, 2023
I am not a big fan of the stock Sanwa JLF, or Hori Hayabusa, because of the dead zone space, and the throw of the joysticks. I bought an oversized actuator, and the new Sanwa rounded square gate (both the red, and blue gates), but it wasn't the same. I've had a V2 kit before, and let me tell you, installing this thing, and messing with this again feels so amazing!! It says its similar to a Korean stick feel. I've never experienced a korean stick, but I love when the rubber gromet helps me get back to neutral really quickly. With the new gate and the actuators included, the throw is MUCH shorter, which is a-ok with me. If you want a similar feel to the stock joystick, I would recommend the v5 kit, but if you would like to experience something else, I can recommend this kit. It's pretty nice, especially with a bullet top!
Recommended Products
$499.50
$ 99 .00 $99.00