Your cart is empty.
Your cart is empty.Product Description
TabMount 360 iPad Tripod Mount
TabMount 360 Tablet Tripod Mount
Fits Any iPad or Tablet
Expands from 6.25 inches to 9.30 inches to securely hold any model, including the iPad Pro 12.9, iPad Air, iPad Mini, Microsoft Surface, Galaxy Tab & more.
Built-in Cold Shoe Mount
The TabMount 360 iPad Tripod Mount also features 2 1/4" screw holes and a cold shoe mount, perfect for adding accessories like light or mic.
Rubber Grip Padding
The non-slip rubberized surface keeps your iPad or tablet stable and helps prevent it from falling or scratching
The Ultimate iPad Holder for Tripod
Bob Paczynski
Reviewed in the United States on January 21, 2025
Great product, works well, fair price, fast shipping.
BioTeachK
Reviewed in the United States on January 20, 2025
Solid construction. Fits my 12.9 iPad Pro with case. Easy adjustment. Will fit any tripod with a standard camera mount.
Don Mateo
Reviewed in the United States on August 22, 2024
The tripod mount is metal, but the clamp that grios the ipad is cheap plastic. I’m not sure if I want to trust mounting my expensive ipad Pro with that…
Flying Irish
Reviewed in the United States on July 26, 2024
Finally, an IPAD tripod holder system fully integrated providing secure display and full motion orientation. Can't wait to use it to track beach activities and wild life
Sounds Great!
Reviewed in the United States on June 30, 2024
The media could not be loaded.
Ted Curran
Reviewed in the United States on November 23, 2024
I've got a 13 inch tablet and I've tried a bunch of these kinds of stands. This one is the best. It securely grips the tablet without squeezing too much. It has the most options for how to attach it to a tripod.
MR A C Johnston
Reviewed in the United Kingdom on March 6, 2021
I was worried as this didn’t look terribly sturdy in the pictures, but it is incredibly solid and doesn’t allow the ipad to slip when it is tilted (a problem I have had with previous purchases) The screw mechanism holds my ipad (air gen 4) in place. It only fits in in landscape, but the ball mount allows to tilt this into portrait (just make sure you have the clearance on your tripod).I mostly use this mount on a min tripod for video chat/ watching videos, but it is incredibly versatile.The ball mount has been very secure so far.The remote feels very light, but is easy to connect to devices and functional.Over all this is a great buy, and although much slimmer than other products, actually feels more robust when the ipad is mounted (i’ve gone through 2 cheaper alternatives very quickly, that have broken after very light wear and tear).Worth the money for sure.
Cliente de
Reviewed in Mexico on March 22, 2021
La mejor calidad que he visto, le queda perfecto a mi tripie, muy recomendable.
larszeth
Reviewed in Mexico on February 27, 2021
Compré éste producto porque tenía necesidad de colocar una iPad Pro de 12.9 pulgadas sobre tripié. El adaptador tiene espacio para éste tamaño con todo y case. El material se ve de buena calidad (para ser producto chino). Viene con un cabezal y un control remoto bluetooth. Lo he probado con mi iPad no tengo queja alguna, se sujeta bien y firme. Como todas estas cosas, hay que tener cuidado en su manejo y no forzar o exigir en demasía al apretar. Las gomas sujetan bien y seguro la tableta, no hay que preocuparse. Apretar de más puede reventar el mecanismo o lastimar tu dispositivo. En la imagen, el cabezal está sujetado al centro del sujetador, pues también cuenta con una entrada vertical en uno de los extremos.
Matt O
Reviewed in the United States on January 30, 2021
Our kids are doing online classes and the current tablet holders we have are at a 45 degree angle, so they basically just show the kids' heads and ceiling. I wanted a better holder so that the camera can point downwards and that would give me more flexibility for display. Since I have a couple of tripods, I figured I'd get a mount for the iPad, but it was difficult to find a good product that accommodated the iPad Pro 12.9". This tablet holder does the trick. It holds the iPad Pro 12.9" in a horizontal grip and the included ball head allows me to switch the iPad to vertical orientation without having to use the tripod head's pan/tilt function.The holder grips the 12.9" iPad Pro in its Apple silicone case and still has room to spare for a slightly thicker case. I don't know if it would go to an Otterbox/rugged case depth, but it might. It would not accommodate a big, spongy kid's-style case. The ballhead mount to attach the ballhead to the iPad holder is good quality hard rubber or rubber coated metal with texture to make it easy to tighten. The ballhead has no adjustment for attachment to the tripod mounting plate. The holder and ballhead are sturdy enough to easily accommodate the big iPad's weight. The tripod I'm using in the photos is my lightweight Amazon Basics tripod and is the least sturdy of all of my tripods: I wouldn't trust a digital SLR to that tripod, but the iPad Pro 12.9" is fine in any configuration the ballhead allows.Slight design flaw with the butterfly screw for the ballhead: It's pretty much the same depth as the ballhead, so it rubs against the tripod mounting plate when I turn it. Should be a little smaller or the ballhead base should be a little bigger. The ballhead arm is also kind of short, so expect the mounting plate and/or pan/tilt head of your tripod to prevent you from going perfectly vertical. My iPad sits against the base/struts of the tripod in the vertical ballhead position. I have no opinion on the remote shutter that comes with the mount since I use my watch as a remote when needed. Overall, though, it's exactly what I was looking for and is a good value in my opinion. I'm ordering another after posting this.
horst
Reviewed in Germany on November 23, 2020
Die Halterung ist gut. Die Fernbedienung hat auch geklappt.
eifli
Reviewed in Germany on October 28, 2020
Positiv:- einfache Handhabung durch Verschraubung- ordentlich Verarbeitet- hält ein iPad Pro 12,9 Zoll sicher, sowohl Hochkant als auch Quer - ordentliches Stativ vorausgesetzt!- beiliegender Fernauslöser funktioniert nach Kopplung einwandfrei- beiliegender Kugelkopf hält fest und sicher - aber...Negativ:- ...der Kugelkopf hat eine Flügelschraube deren "Flügel" einen kleinen Tacken (nicht mal 1 mm) zu groß ist - siehe Bild - er setzt auf dem angeschraubten Halter auf und kann somit weder vernünftig gelöst oder verschraubt werden. Abhilfe schafft eine dünne Unterlagscheibe unter dem Fuß - oder wie in meinem Fall der original Kugelkopf meines Fotostativs.Natürlich kann man die Flügelschraube auch austauschen, oder abschleifen oder... - er lässt sich zumindest problemlos herausdrehen.Fazit:Trotz der kleinen Unstimmigkeit am Kugelkopf - toller einfach gehaltener und somit sehr praktikabler Halter für Tablets ab ca. 9 Zoll (iPad Mini Hochkant) bis zum 12,9 Zoll iPad Pro.Bei vernünftigem Stativ eine sehr sichere Halterung, egal ob Hochkant oder Quer, auch auf Reisen dank geringen Gewicht und kleinem Packmaß.
Thom
Reviewed in the United States on January 23, 2020
The product is very nice, appears to be well made, and arrived on time in a multi-item shipment. In my mind I knew exactly how it would mount on my Manfrotto ball head light-weight tripod. Upon inspection of the tripod-product ball head it immediately became apparent that there was a problem. The Manfrotto head mount threads are huge compared to the product threads. I re-read the product description to see if the mounting screw was mentioned and I didn’t find any specs that would tip me off to the incompatibility of the parts. Luckily, I rarely throw away still-usable things like my older tripod. I retrieved the older, much heavier tripod from storage and was pleased to find the threads to be compatible. I attached the product to the old tripod using the mid-point attach point and, after some adjustments, successfully attached my iPad Pro in landscape mode to the product holder and tested it for ease of use. Tests were successful and operation was acceptable with some limitations due to the old tripod attachment configuration. I have not tried the portrait attachment point on the end of the product. I hesitated to give it 5 stars but decided to anyway because it really is a nice product that performs acceptably given the comments above. It would be even better if there was an adapter included that allowed connection to the larger Manfrotto threads. I recommend this product with above caveats.
Recommended Products