Your cart is empty.
Your cart is empty.Product Description
- Direction For Use：
- Before Installing the Filter, Please Pay Attention to Cleaning the Threaded Ports and Accessories of the Filter to Ensure That No Impurities Enter the Air System.
- Pay Attention to the Airflow Direction, and Follow the Arrow on the Filter. the Wrong Airflow Direction Will Cause the Filter to Not Work Properly.
- About Drainage: when There is No Air Pressure, the Water in the Filter Cup Will Be Automatically Discharged; when There is Air Pressure, Please Manually Push the Drainage Needle Under the Filter Cup Up, and the Water Will Be Discharged.
- Precautions:
- The Water Cup Should be Checked Regularly for Cracks and Contamination, in order to Prevent the Water Cup from Breaking and Hurting People.
- Before Installing the Fittings, Please Wrap the Teflon Tape Around the Fititings to Avoid Air Leakage.
- There May Be Leakage During the First Installation (the Internal Pressure is Different from the External Pressure at the Beginning, and Excess Pressure Will Be Discharged, Please Wait Patiently, After Exhausting Excess Air, No Leakage Will Occur)
The Story Of Tailonz Pneumatic
Tailonz Pneumatic Professional Production of Pneumatic Parts, Air Filters, Solenoid Valves, Pneumatic Pipelines and Other Pneumatic Components.
We Develop Tools and Products for Ourselves and Our Customers Based on Actual Needs and Expectations.
All Products Are Directly Produced from the Factory to the Warehouse, We Ensure That Every Link, Every Process.
AR2000-02 Air Filter Pressure Regulator
Product Parameter
- Air Inlet Size: 1/4 NPT
- Flow:500L/minutes
- Max Working Pressure: 150PSI(10.3BAR)
- Operating Temperature Range: 40-140F(5-60℃)
- Drain Type: manual
- Body Material: Aluminum alloy
- 1× AR2000（Air Pressure Regulator）
- 1 × Pressure Gauge
- 1 × Metal Bracket
- 1 × English Instruction
- 2 × 1/4" × 1/4" NPT Male Pipe（If you need Male NPT threads，you can use it ）
- 1 × Nickel-plated Iron Air Plug
- 1 × Nickel-plated Iron Air Coupler
Pressure regulation procedure
Step 1
Hold the spin button and pull up.
Step 2
Turn the Rotary Button to Adjust the Pressure.
Step 3
The Value Can Be Checked by the Pressure Gauge.
Step 4
Press the Button to Lock the Pressure.
product feature
Precision Pressure Gauge
The Pressure Gauge with Copper Core Has More Accurate Pressure Induction, and the Metal Shell is Resistant to Impact , So the Service Life is Long.
The dial scale has two units of measurement (psi/mpa).
Backrest Bracket
With Metal Bracket, Easy to Fix on the Wall, Save Space, More Convenient to Use.
Smooth Body with No Burr.Flexible and Simple.
Fine Workmanship
Made of Precision Aluminum, the Surface Has Been Passivated and Will Not Rust or Moldy.Strong Resistance to Pressure.fine Processing, Explosion - Proof and Crack - Proof.Smooth Edges and Meticulous Workmanship.deeper and Smoother Threads Design Makes Work Easier and More Effective.
Product Size
Direction For Use：
- Before Installing the Filter, Please Pay Attention to Cleaning the Threaded Ports and Accessories of the Filter to Ensure That No Impurities Enter the Air System.
- Pay Attention to the Airflow Direction, and Follow the Arrow on the Filter. the Wrong Airflow Direction Will Cause the Filter to Not Work Properly.
- About Drainage: when There is No Air Pressure, the Water in the Filter Cup Will Be Automatically Discharged; when There is Air Pressure, Please Manually Push the Drainage Needle Under the Filter Cup Up, and the Water Will Be Discharged.
Precautions:
- Before Installing the Fittings, Please Wrap the Teflon Tape Around the Fititings to Avoid Air Leakage.
- There May Be Leakage During the First Installation (the Internal Pressure is Different from the External Pressure at the Beginning, and Excess Pressure Will Be Discharged, Please Wait Patiently, After Exhausting Excess Air, No Leakage Will Occur)
Protobug
Reviewed in the United States on March 19, 2022
This regulator is nicely packaged with plastic plugs in all the ports. I used it to replace a bad regulator in a plasma cutter. The diameter of the hole in the bracket is about 1-1/4 inch and the hole for the old regulator was smaller so I had to use a carbide burr to enlarge the hole in the panel so the new regulator would fit. As usual the Chinese pipe threads were trouble and the fittings leaked when screwed in all the way. To be fair, it could be the fault of the fittings but I don't think any of the threads were tapered pipe threads. I used urethane sealant on the threads and hopefully that will stop the leaking, haven't tested that since re-installing the fittings. For the price I think it is a good buy if those fittings stop leaking.
Dennis Schneiderwent
Reviewed in the United States on December 15, 2022
I found the gauge worthless and the rest of the regulator pretty much the same.
Aaron
Reviewed in the United States on October 29, 2022
I used a Viair 400P compressor for winterization using this kit (https://www.amazon.com/gp/product/B08L3T5KX7/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1#customerReviews) and this regulator (https://www.amazon.com/gp/product/B07RL3H6TW/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1). It seemed to work very well and I liked that the regulator protected my plumbing and the gate valve meant I could safely attach-detach the gear without having to use the hand-trigger from the Viair.Combining the two kits, I plugged the silver quick connect into the compressor hose, then screwed that into the brass quick connect. I put the quick connect socket on the input side of the regulator and connected the hose directly to the output side with the gate valve on the end of that (oriented so the on position pointed down the hose to the regulator). Finally I connected the whole thing into the hose adapter and connected it directly to the city water port. With the gate valve closed the system pressurized and I could set the regulator to 30psi.To winterize, I could open the valve and then go check on my faucets one at a time without messing with the hand-trigger. With the gate closed the compressor kicked on a little once every 40-60 seconds so something must have been leaking. I'm going to check the fittings more closely the next time I use it. I’ve only winterized once but was very happy with that experience. I wish I had taken a picture of the connections, but once you think through the parts available it’s pretty obvious. I had some pieces left over, but that was my experience with my specific equipment.
Mark Jozwik
Reviewed in the United States on August 25, 2020
I ordered these because another brand didn't meet expectations. I was first impressed by the look and quality until it came time to install. First I had to run a tap through most of the port holes. It seems like the plastic was over molded because the fitting barely went in a quarter turn. This was the same problem with the other brand. No biggie if you have a 1/4 NPT tap handy. Next was that both (I ordered two) had bad gauges. One, the needle fell off and two, had the needle on the wrong side of the 0 mark. Lucky I had two spare gauges. I have yet to install them but I am questioning their accuracy.
Bill Q Public
Reviewed in the United States on July 18, 2020
Well thought out set of fittings and teflon to boot. Body is not plastic. Appears to be built to last. The knob is plastic and the need to pull it up to adjust the pressure is a bit of a pain. My application does not require frequent adjustment but could imagine the bother it would be if I did. I fits my needs perfectly which is on a 20 gallon Campbell Hausfeld compressor.
Richard B.
Reviewed in the United States on March 18, 2020
This inexpensive air regulator is a great deal. No leaks and maintains an average 90psi for my pneumatic nailers. My compressor puts out 145psi and this little regulator is easy to adjust to any psi I need. Even after shutting the air supply valve I have before the regulator, it takes a over a week to drop to 20 or 30 psi where before replacing the regulator, it would leak down to that in 5 minutes.
muttmaster
Reviewed in the United States on November 23, 2019
Well made. Works well with both of my compressors. AC and DC. I attached quick connect fittings so I can switch for home use and for my portable DC compressor. Might have to get another at this price. Very happy that some things are still made to last and at an reasonable price. Dont see that too often these days.
Gary from Texas
Reviewed in the United States on October 21, 2019
Even though this regulator was sold for a low price, it looks good and works just fine. Not only were brass nipple fittings included for use in the installation, but there was even some Teflon tape for sealing the connections. It was easy to install and works great.
Recommended Products
$573.06
$ 99 .00 $99.00
$109.99
$ 53 .99 $53.99