Your cart is empty.
Your cart is empty. 1. The thread repairing set is placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear and high accuracy.
2. In the event of a threading error or repair of a damaged internal threaded hole, the threaded hole can be economically and effectively repaired by using a threaded threaded sleeve as a means of repair. The same screws can also be used after repair.
3. You can also uses this thread insert to transfer inch thread to mm thread which is convenient and fast.
4. Typical applications: parts threaded hole sliding repair, such as injection machine template thread hole repair, high voltage switchgear, microwave communication, auto parts, air separation equipment, radiators, etc.; imported equipment or mechanical inch thread damage, due to spare parts supply problems and need to be changed to mm thread.
5. All accessories are integrated in a box for convenient transportation and store.
Specification:
Item Type:Thread Repair Sheath Kit
Material:Stainless Steel
Thread Insert Size:M10X1.25 Length:2D
packing list:
1 x Spiral Drill
1 x Screw Tap
1 x Wrench
1 x Break Pin Tool
1 x Hex Wrench
12 x Thread Repair Insert
Notice:
Drill holes using a matching drill bit.
Use wire threaded (special) tap tapping, the tapping depth must exceed the wire screw sleeve mounting length.
Insert the wire screw into the mounting wrench with the tail down. Turn the wrench handle to screw the wire screw into the threaded hole.
Use a break pin tool to align the mounting handle (tail) with a hammer to strike the punching tool and the tail handle can be removed.
When there is a problem with the installation of the threaded screw sleeve, (such as a jumper), the threaded sleeve can be taken out by the wire threading tool.
