Your cart is empty.
Your cart is empty.Product Description
The Tire Pressure Monitoring System is crucial for several reasons
It acts as an early - warning system, promptly alerting you when there are air leaks or other abnormal tire conditions. This gives you the opportunity to take corrective measures right away, which not only extends the lifespan of your tires but also, more importantly, ensures your driving safety. With this system in place, you can drive with greater peace of mind, knowing that potential tire - related hazards are being closely monitored.
Solar Power and USB Charging
Our product provides two convenient charging methods: USB cable charging and solar charging. It features a highly efficient solar panel and a built - in lithium battery, eliminating the need for battery replacement. Also, it doesn't occupy the car cigarette lighter socket, ensuring continuous operation of the tire pressure monitoring system for worry - free driving.
4 External Cap Sensors
What's the difference between built - in and external sensors? Built - in sensors need professional installation and might lead to tire pressure instability. In contrast, external sensors are a breeze to install and can be set up in just a few minutes. The TPMS comes with anti - theft screws, which are highly effective in preventing theft.
Real - Time Monitoring Display
With a loud - volume alert, this display ensures you can easily read the data regardless of where it's installed. You'll always be in the know about your driving conditions.
Wireless RV Tire Pressure Monitoring System
6 - Alarm Modes, LCD Display, Real - Time Pressure and Temperature Monitoring
Product Specification:
Air pressure setting range:0~50psi / 0~3.58ar
Temperature setting range: 60℃~110℃ / 140ºF~230ºF
Working temperature: -20℃~80℃ / -68ºF~176ºF
Storage temperature: -30℃~85℃ / 86ºF~185ºF
Power-on voltage: DC 5V
Frequency: 433.92MHz±20.00MHZ
Size: 3.1x2.87x0.6(in)
Weight:2.4oz
Package Include:
- 1x Mnoitor
- 4x Sensor
- 4x Theftproof nut
- 1x USB Cable
- 1x removal tool
- 1x Manual
Sensor Installation
- Unscrew the valve dust - proof cap and then screw on the hexagonal nut.
- Screw the sensor onto the valve.
- Use a spanner to tighten the hexagonal nut against the sensor in the reverse direction. Make sure it's secure.
- Check for air leaks by applying soapy water to the valve area. If there are bubbles, there's a leak.
Tips
- Before installing the 4 sensors, turn on the display first. Once the vehicle's driving speed reaches 9 MPH or 15 KPH, the display will automatically update the tire pressure data.
- If one of the sensors doesn't function properly after the initial installation, reinstall it and wait for a short while before doing anything further.
- Test the tire pressure while the car is in motion. When the car is stationary, the TPMS reading may not be accurate.