Your cart is empty.
Your cart is empty.Product Description
Titan Attachments 48" Bucket 23TF Tooth Bar
The heavy duty tooth bar from United Attachments is perfect for digging up compacted soils, sod, and gravel with your current bucket attachment. The simple, bolt-on design eliminates the need for a second bucket, protects the cutting edge, and improves digging efficiency of your loader. It's very easy to install! Simply drill two holes in both sides of your bucket, bolt on the tooth bar, and your machine is ready for work.
BOLT ON DESIGN FOR EASY REMOVAL
CUSTOM CUT FOR 48" INSIDE BUCKET WIDTH
PROTECTS BUCKET'S CUTTING EDGE
Mark Twain
Reviewed in the United States on July 19, 2024
Update 09/04/24Good news! this tooth bar actually needed some good wacks from a lil sledge to get on there!!!! and it also needed a few wacks with a chisel to take it off!! The gap didnt even matter so i never used my newly purchased bolts or washers.... woo---weeee!Okay so as of 7/18/24 this product is 46 3/4" wide from outside bracket mounting edge to outside mounting bracket edge... My rippers came painted black though so thats great! But the bag with bolts was ripped so no bolts came or made it!! Might have to get some spacers and nylon locking nuts since my bucket is a smidge wider! Now off to the hardware store but thats the way the cookie crumbles sometimes folks!!
Thomas Devlin jJr.
Reviewed in the United States on June 6, 2024
No bolts. Nuts
Matthew M.
Reviewed in the United States on March 31, 2021
Heafty item and great design if it fit! Looks like it should but the bottom plate seems a bit longer than it should be. Was looking forward to using it today. Not happy at all!
T & D
Reviewed in the United States on March 31, 2021
The Titan spec states that it is 47 1/4 inch long. Since my bucket is 47 1/2 inch wide I figured on needing a few spacers to fill the gap. Unfortunately, the Titan Tooth Bar is 47 3/4 inch. I had to plasma cut and grind for several hours and oxy-propane torch the mounting wings red hot to bend them before it would slide into my bucket. If it's length was as specified, there wouldn't have been a problem! I gave it 2 stars because their welds appear to be good and it had a nice paint job.
E.H.
Reviewed in the United States on April 16, 2021
I was able to use this without bolting it on. As others have said, it is a few inches short of a good fit end to end, but it slips over the end of the bucket so snuggly that bolting it in wasn’t necessary! Performs exactly as expected.
Warren Dool
Reviewed in the United States on June 11, 2019
Bought it to use on my Kubota B2920. Had to make 1/2” spacers for each side and grind some over welding on the bucket edge. Works great and seems very sturdy, would definitely recommend.
RGar
Reviewed in the United States on September 21, 2017
Heavy duty tooth bar but it did not fit a John Deere 48" inch bucket. John Deere 1025R has bucket measurement of 49 inches and the bar is about 2 inches to short. Debating on returning or installing a 1 inch spacer on each side. The bar also came bent so it did not slide easily over the bucket edge and it will require forcing it in place but might be a challenge to remove. Good quality bar but I sure hoped it would have fit just right.
JustMe
Reviewed in the United States on August 3, 2017
Surprised at the heft of this implement. "Robust" would be applicable, were that term not such a cliche. Thick metal with substantial welds all around. More surprised because it cost only $125, with free shipping. If the metal and welds hold up (no reason to suspect they will not) this can do some serious digging, grading, and loading (all of which take practice). It's spec'ed for a 47 3/4" ID bucket width, but by the thickness of the proverbial pubic hair did not slide into my Massey DL95. A few minutes with a 9" grinder applied to the ends of the bar fixed that. It wedges on the bucket blade and is held on by 4 3/4" bolts, with washers and Nylocks (provided). Since the bucket sides need to be drilled, I considered 2 sufficient. Keep the bolts slathered in anti-seize lube and it should be as removable as a clamp-on unit. CONS: This is heavy and unweildly, so have a helper assist with assembly to avoid major metatarsal damage: the weight and forward moment also subtract substantially from the loader payload, so if that is a problem consider a lighter tool, such as a Pithanna bar.
Recommended Products
$339.99
$ 99 .00 $99.00
$119.99
$ 48 .99 $48.99