Your cart is empty.
Your cart is empty.Thinking about building or repairing a boat or surfboard? When your polyester resin coating or layup is ready for sanding and finishing, our two-part TotalBoat Polyester Finishing Resin (also called surfboard resin) dries to the hard, tack-free surface that's just what you need. Used extensively for boat building, marine repair and restoration (especially fiberglass repairs), our polyester resin contains wax, so it cures to a hard finish that's ready to sand and finish with paint or gel coat. High-quality marine grade polyester resin is typically used for one-coat glasswork or as a final, tack-free, sealer coat over tacky polyester laminating resin. Durable polyester finishing resin is perfect for top-coating over wood, fiberglass, metal, and composites. Medium viscosity resin is easy to spread, provides fast wet out of fiberglass cloth and chopped strand mat (CSM), and minimizes dripping and sagging on vertical surfaces. The medium viscosity also prevents pattern transfer through gel coat finishes to help give you a smooth, attractive surface. Includes 1 bottle of MEKP (methyl ethyl ketone peroxide) hardener with each quart or gallon finishing resin. Compare to Fiberglass Supply Depot FSD Polyester Resin with Hardener, True Composites Fiberglass Resin, Bondo Fiberglass Resin, and Evercoat Boat Yard Fiberglass Resin. All TotalBoat products provide great value and great results. 100% made in the USA.
Bo
Reviewed in the United States on September 23, 2024
Resin and fiberglass a damaged surfboard,seems to be correct product for the job
Jim
Reviewed in the United States on July 17, 2024
better late than never
BlueBonneville
Reviewed in the United States on July 15, 2024
I used this with fiberglass weave to repair and reinforce a (properly remediated) rust hole and problem on the interior bottoms of my doors on a truck. Worked extremely well. Top notch product, and great cure time (3/4 hours on a hot day). Comes in a plastic bottle now, that works better than the pictured tin container. Follow directions completely, mixing in a tin can (not a plastic Solo cup-which will chemically melt), and all is good.
Patrick bench
Reviewed in the United States on May 30, 2024
Used with fiberglass cloth to patch unused instrument holes on my console
Chris
Reviewed in the United States on March 6, 2024
Delivered as said and worked well. The product setup slower than I expected but it did dry to a full cure by morning. Was a 65 degree day and dry. no humidity that may have slowed the cure.
jerry
Reviewed in the United States on December 30, 2024
Worked well
Richard Fierros
Reviewed in the United States on August 27, 2023
This is really a great product. Total boat has made this easy to use. Getting started is a little tricky but once you get it dialed in it's easy. Keep in mind that weather conditions really play a role in how this items sets up. Be in a very very very well ventilated area. Wear a respirator and eye perfection. Have acetone for quick clean ups. Plan your project out have everything laid out and ready for resin. trust me it makes it so much easier. Lastly take some time to figure the MEKP to resin. Make a few small batches find the one that works for you and go with it.
Chad
Reviewed in the United States on June 16, 2021
Product serves it’s purpose, unfortunately I didn’t know it wasn’t recommended for carbon fiber layups. Still worked but I went with epoxy instead. since the styrene smell is awful with this resin I’m not upset I’m switching. I smell that stuff enough in the sewers!Total boat products always work well though and this did not disappoint
Recommended Products
