Your cart is empty.
Your cart is empty.Transmission Pan, Cooling, 6-1/8 in Deep, Adds 8.31 qt Capacity, Steel, Black Paint, 4R100 / E4OD / 5R110 / 5R110W, Kit
Jimmy
Reviewed in the United States on March 21, 2025
For the price it's unbeatable! Installed this on my 2000 F350. My drain plug did not leak like some others have had issues with. Dropped my trans temps 15-20*. Would buy again!
Bishop
Reviewed in the United States on February 26, 2025
Great upgrade. The item shipped as scheduled. The product was packed very well. Perfect fit. The gasket was good quality but not better than the O.E.M gasket. Would have given it a 5 but the gasket around the drain plug is leaking. This was the only complaint a solid rubber washer would probably work better.
Christopher Caison
Reviewed in the United States on March 3, 2024
I highly recommend this Transmission pan if you have a E4OD transmission on the floor. It makes a lot of difference in his performance as far as the fluid staying cool and maintaining. It’s got a transmission fluid drainage plug on it which the factory pan does not. That makes changing your transmission fluid we needed is easy is changing you in your motor You can’t go wrong.
Erica Cardwell
Reviewed in the United States on November 21, 2024
Exact fit, easy installation and instructions very through. Heat distribution for cooler temperatures is very creative and exceptionally for the extreme hauler! Definitely recommend!
david carter
Reviewed in the United States on October 3, 2024
We own a Transmission shop. I offer this pan to reduce heat adds fluid. Lower trans temp the longer she will last! Well worth the money! I APPROVE THIS PAN 33 YEARS EXPERIENCE - 21 YEARS SHOP OWNER
Thebaronofsd
Reviewed in the United States on July 27, 2023
My story starts a year ago with a blown transmission in my 99.5 F250 7.3/4R100 on a camping trip to Big Bear CA. One transmission rebuild later, the yearly trip to Big Bear was months away and I was concerned it would happen again.What I did after my was install the Glowshift 4 gauge pack, this Deralle transmission pan, the Dieselsite 40 row O2A secondary trans cooler, and a trans bypass delete kit.I just returned from that yearly trip and the highest temp I hit from North County San Diego to the Serrano campground in Big bear which involves pulling a trailer up past the 8K' elevation line was 170 degrees. Now, that 170 degrees I actually hit in traffic on the 215 near March Airforce base with less than 20mph worth of wind hitting the front of the truck. The temp on the climb up the mountain topped out at just over 160 degrees holding 30-45mph up the hill. From the top of the hill to the city of Big Bear I shed 20 degrees.Now, I can't vouch for how much this pan contributed. I haven't done testing to determine how much the air channels do or don't contribute to cooling. I don't have control points for how much each modification I've done to the transmission netted X amount of efficiency. All I can say is this pan, my secondary cooler, and the trans delete kit together perform incredibly well together. Anyone looking to improve the towing performance of their old 4R100 or the 5R110 this pan is IMO an essential component.
EmergencyGetaway
Reviewed in the United States on November 16, 2023
Installed the Derale 14208 Transmission Cooling Pan on our 2003 Ford E450 with the 4R100 transmission, and it's been a game-changer. The cooling pan effectively lowered transmission temperatures by about 20 degrees. Impressed with its sturdy build quality, the installation process was a breeze, making it accessible even for those with minimal mechanical expertise. If you're seeking a reliable solution to enhance transmission performance, this cooling pan is a solid choice, delivering on its promises with an impactful temperature reduction.
DragonKeeper
Reviewed in the United States on July 13, 2022
This pan is awesome! I read several reviews stating that it does not fit on an Excursion with the 7.3 due to the crossmember for the trans. First attempt at the install I also encountered the pan coming in contact with the crossmember... after a while of encountering this issue, I simply did some wiggling and rotating slightly of the pan and presto! The pan went on flawlessly, looks great, the extra capacity is nice, and hopefully I have as good of luck with the cooling aspect as others have found. As a side note, I also read that the drain plug likes to leak... I tested mine before installation by filling with water, torqued the plug to 20 ft. lbs... low and behold after installing the pan and filling it, mine began to leak at the drain plug. I ended up torqueing the drain plug to 22 ft. lbs. and so far 48 hours later, no more leaks. So if anyone is interested in a good torque for the drain plug, I found 22 ft. lbs. works great, not overtight and tight enough to seal her up. Good luck to everyone installing this pan, and yes it does fit on the 7.3 Excursions!
Recommended Products
$117.94
$ 52 .99 $52.99