Shopping Cart

Your cart is empty.

Your cart is empty.

Traxxas 3350X Velineon Brushless Power System Waterproof

Free shipping on orders over $29.99

$189.95

$ 84 .99 $84.99

In Stock
  • Input Voltage: NiCad/NiMH 4-9 Cells (4.8 to 10.8 Volts DC), LiPo 2-3 Cells (7.4 to 11.1 Volts DC)
  • Motor Limit (Brushed/Brushless): No motor limit
  • Continuous Current: 200A
  • BEC Output: 6.0 V/2.5A (with 6-cell NiMH)
  • 10-Turn, 3500kV


From the Manufacturer

The Velineon VXL-3s forward/reverse electronic speed control simplifies brushless technology with easy, built-in profiles and intuitive programming. Tri-mode operation auto detects the motor type for brushed, sensored or sensorless brushless motors. The VXL-3s uses advanced circuit design that allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. It sets up, operates, and programs just like the Traxxas XL-5 family of ESCs so there’s no tricky new procedures to learn. Traxxas’ exclusive patent-pending Training Mode is also included to limit full throttle to 50% for young or inexperienced drivers. For the most advanced users, the VXL-3s is equipped with two-stage low voltage detection to allow LiPo battery use, including powerful 11.1-volt 3S packs. The Velineon 3500 Brushless Motor uses ultra high-temperature Neodymium magnets, high-speed ball bearings, and a precision balanced rotor for power and long-life. Since there are no brushes or commutator to wear out, the need for maintenance is virtually eliminated. The Velineon 3500 delivers consistent, high-power output, run after run.


Ben
Reviewed in the United States on April 3, 2025
💯
David Snyder
Reviewed in the United States on July 7, 2024
This product I have in 5 Traxxas slashes and also in my rustler 4x4.
B Ware.
Reviewed in Canada on May 18, 2016
exactly what I had ordered, very happy
Eugene Cimis
Reviewed in the United States on April 12, 2016
You want to have some real fun? Do what I did. Dream about your first RC car with this technology, tell your hobby store guy about it... after he laughs at you and says, "you'll shoot your eye out kid," BUILD IT ANYWAY!! No one believe's me when I tell them that I successfully installed this in a vintage 80's Tamiya Grasshopper without shredding the gearbox! LOL. Excluding this product and a Traxxas 25c 7.4v 5800mAh LiPo, the grasshopper is completely stock. I thought I would destroy the spider gears on the first hole shot, but I was happy to find that the stock grasshopper tires are the only "safety clutch" you will need. After one run the tires showed considerable signs of wear and it was so worth it! This Velineon system is so much fun to experiment with and I wouldn't hesitate to put it in any RC car or truck, new or old. Right now I'm thinking Vintage Aluminum Bathtub Chassis RC-10 with 11.1 Volts! WOO HOO!!
Nicklas
Reviewed in the United States on January 5, 2015
This is one of the best brushless systems out there but if you're getting this for a 1/10 scale truck, go with castle creations. They are much better in all categories because they specialize in motors and escs. I have fried one of these velinion escs but traxxas got me a new one for about 50 bucks and they also got me some new chrome wheels for my stampede vxl. They only have good customer service.
Brando
Reviewed in the United States on May 3, 2014
I've had my Slash 2wd for a month now and I love it, but I defiantly needed more from it on the desert terrain I run in. I have not gone LIPO yet so I figured upgrading the motor will give me more power. In addition to the motor I got some Proline tires front and rear.Let me say that this combination has completely transformed my truck from very sloppy and lacking that power to break the tires loose when at higher speeds, to a very stable responsive monster that just tears up loose dirt and washes.It's a significant investment for a major upgrade to your truck. I'm very satisfied as it does what it promised and my truck is just were i want it for the time being .I would highly recommend upgrading your stock tires if you drive in anything loose. I also wired a trailer hitch bolt to the front which keeps the front end down. The performance is amazing.
Wilfredo Ortiz
Reviewed in the United States on August 6, 2013
I have a Stampede 2WD and replaced the 12T-550 motor and XL-5 ESC for the Velineon/ VXL-3s esc and wow big difference!!, it's much faster and has way more torque than the stock motor/esc and that's with just the stock 8v 7cell NiMH battery that came with the truck. cant wait to run lipo 2s/3s this thing will fly, sometimes the front lift when given full throttle on my wooden floor... totally worth it!!
Kitsune22
Reviewed in the United States on May 18, 2011
Brushless dc motors are AMAZING. So much less rotor drag and less friction,only coggs a little bit when given slight throttle IE 1:28 out of WOT will crawl but not very well,sensored is best for crawling. This works great for off road and speed runs. Does get quite hot. I run a stock stampede 2x4 19/90 gearing wich is stock for good speed and torque for off roading. I monitored temps in long length grass,after completly draining my stock 3000mah 7 cell traxxas battery,motor temps were 147F and esc was about 136F. No fans no extra cooling fins,with the body on and BASHING AS HARD AS I COULD. i porposely was trying to see how hot this system would run under the most agressive extreme stressed conditions,stop/go/wot/reverse. Etc. All out and seemed to be just fine. I highly reccomend getting a IR tempature gauge as well,i use the duratrax flashpoint. Finger touch test isnt very reliable for measureing motor tempature. 150-180 is a good safe zone,anything over 180F itll damage the rotor magnets. Check the user manual. Keep it properly geared,ESC will thermal shutdown,but will NOT shutdown if the vxl motor oerheats. Monitor experiment and make sure all is set and well before using all out. Hope this could help someone.As for packaging and delivery,delivered great on time no damage or anything,i cant complain. The box the VXL kit is very nice and everything is layed out in foam cushon,vxl manual decals 3s esc and motor are neatly in foam. Makes a great place to store your old esc and motor after swapping it with this brushless kit. 5/5* very pleased and would absolutly buy over and over if i had more cars to convert to brushless!
James
Reviewed in the United States on October 29, 2011
I just got mine today and the speed improvement is unbelievable. I was expecting maybe a minor speed increase because I don't have lipo's or anything special power-wise, but when I kicked this off it was unbelievable. At half throttle it was outrunning my old titan 12. It looks awesome, it is easy to install (you may have trouble opening your water-proof case because the hex size is not included in your vehicle or with the brushless system. I took it out in the snow and it does more that great. ITS A GREAT DEAL TOO, YOU SAVE OVER 100 DOLLARS!!!
Recommended Products