Your cart is empty.
Your cart is empty.Product Description
Impact Construction
Made of chromium vanadium steel, integral heat treatment, strong impact force, high torque and good toughness. Electrophoresis surface treatment, not easy to rust and corrosion resistance.
Thicken-wall, electric wrench is available.
6-Point Socket
It can fit tightly to the hexagon of the fastener head so that the maximum torque can be applied without slipping.
Wide Application
For disassembly and tightening of hexagon head bolts and nuts, especially suitable for requiring large torque and narrow space.
Specification:
- Drive Size: 1/2-inch
- Total Length: 200mm / 8-inch
- Material: Chrome Vanadium Steel (CR-V)
- Finish: Electrophoresis
Product Details
Pin Hole
The through-hole on the drive end allows the use of locking pins & rings to lock the tang of the impact wrench or driver so that it won't fall off or stick on the fastener head. (Note: Do Not Include Pins and Rings ).
Clear Size Marking
With size stamped clearly on it, you can quickly identify and get the correct size.
Radius Corner Design
Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners, avoid stress concentrations that can cause cracking.
HDH
Reviewed in the United States on February 9, 2025
I used this tool to replace a coolant sensor on a 2007 Ford Focus
Tamara
Reviewed in Canada on February 23, 2025
It is so long that it sometimes doesn't fit (on the gun) and you have to use a 1/2" ratchet.Long enough for any caging bolt. Super thin wall but strong enough so far.
Najee Mustafaa
Reviewed in the United States on January 23, 2025
I had a difficult time finding this product at my local stores. Fit perfect. Great quality and function. Removed my plugs with ease. Great value for the money.
Meghan
Reviewed in the United States on August 25, 2024
Walls are very thin don’t recommend impacting to much with it.
Deborah G
Reviewed in the United States on August 17, 2024
Worked great, could not reach the bolt without this tool. Good quality tool.
Bruno Mader
Reviewed in Canada on June 8, 2024
Worked like a charm, way better than the cheap ones they sell to remove faucet cartridges
Christoph Tucker
Reviewed in the United States on November 21, 2024
Build quality and fitment are perfect. It takes the spike lug nuts off my dually with no issues. Truly worth the price!
Adrian
Reviewed in the United States on November 20, 2024
Gave me alot of room to take off spiked lug nuts on my charger
Brian B.
Reviewed in the United States on October 16, 2024
I liked the concept of a really deep socket but the walls on this were so thin and the finish was so bad it was ruined after using it on 4 tires...save your money
Farmer John
Reviewed in Canada on September 2, 2023
I picked this up for the John Deere 9770 Combine. The belt tensioners are long bolts, double nutted on a spring. It takes a lot of cranking with a ratchet wrench, and a lot of time, so I thought I would try this on an electric impact driver. If you have a John Deere combine, you need to buy this tool. All I did was loosen the locking nut a half a turn, put this 8 inch deep socket over both nuts, and hit it with my electric impact driver. Poof it was off, and putting it back on is just as simple. It is done in seconds. If you are driving a New Holland combine, you will need the 19mm instead of the 18mm I got for the Deere. A real time saver, works great, and a must have for JD combines....
Ted Andkilde
Reviewed in the United States on August 17, 2023
This oddball sized socket is perfect for tightening the cables on a two-post automotive lift. The cables are double nutted, and the nuts are buried quite deep in the gubbins of my lift. This is a rather dubious thin-walled socket of suspect metal quality with a fairly fragile black finish, but, for my low-torque, deep-reach application it worked out perfectly.
BK1234
Reviewed in Canada on December 12, 2023
use this on an impact for spring tensioners on our combines, makes jobs that would take 5 min with a ratchet wrench take 30s
Reino
Reviewed in Australia on October 8, 2023
Don't recommend due to the extremely poor quality of this socket.
Recommended Products