Your cart is empty.
Your cart is empty.Product Description
Impact Construction
Made of chromium vanadium steel, integral heat treatment, strong impact force, high torque and good toughness. Electrophoresis surface treatment, not easy to rust and corrosion resistance.
Thicken-wall, electric wrench is available.
6-Point Socket
It can fit tightly to the hexagon of the fastener head so that the maximum torque can be applied without slipping.
Wide Application
For disassembly and tightening of hexagon head bolts and nuts, especially suitable for requiring large torque and narrow space.
Specification:
- Drive Size: 1/2-inch
- Total Length: 150mm / 6-inch
- Material: Chrome Vanadium Steel (CR-V)
- Finish: Electrophoresis
Product Details
Pin Hole
The through-hole on the drive end allows the use of locking pins & rings to lock the tang of the impact wrench or driver so that it won't fall off or stick on the fastener head. (Note: Do Not Include Pins and Rings ).
Clear Size Marking
With size stamped clearly on it, you can quickly identify and get the correct size.
Radius Corner Design
Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners, avoid stress concentrations that can cause cracking.
gino d.
Reviewed in Canada on February 8, 2025
Good for price. So far working good
Alvin Priest
Reviewed in the United States on September 19, 2024
This fit perfect for what I needed it for. I have used it a couple of times, and no problems as of yet.
Michael L. Smith
Reviewed in the United States on August 8, 2024
The end stretched open on the first use making it sloppy, unable and caused damage to the bolt. Avoid these sockets.
Steven sheppard
Reviewed in Canada on March 4, 2024
A little thin on the sidewalls but will see how it holds up
Constonce
Reviewed in the United States on March 17, 2024
I had a stuck O2 sensor that was forcing my specialty socket to expand/stretch around it. I used this socket to remove it, no problem. You do need to cut the sensor cable off the old sensor before fitting this socket.
Customer
Reviewed in the United States on March 1, 2024
I needed a 22 mill extra deep socket to remove an old stubborn oxygen sensor from my 2001 BMW 325XI. I tried to different types of oxygen sensor removal tools and both kept spinning. I used this and it gripped perfectly and was able to remove it right away without any issue. 5 star
F22Barrier
Reviewed in the United States on February 18, 2024
Awesome to delete the need for an extension in trailer wheels and have less to keep up with. Very good quality for the money .
Richard J.
Reviewed in the United States on December 5, 2024
deep socket in 6" must have for the wheels
NKD
Reviewed in Canada on November 11, 2024
Literally cracked like soft metal on the 5th bolt I was tightening to OEM spec of 83ftlbs torque.I wouldn't purchase again.
BOB MOGILSKI
Reviewed in the United States on April 30, 2024
Need this fitting in order to remove my oil filter. The filter on my new car was different than the past filters.
Cmax
Reviewed in Canada on June 10, 2023
After 1 and a 1/2 week of use it broke. No impact only torquing with adjustment set at 95 ft/lb. Love the length but quality is bad.
Buds and Blossoms - Happy Parents Happy Kids
Reviewed in Canada on May 6, 2023
Bad quality. Split in the middle after two wheels.
D
Reviewed in the United States on December 24, 2023
Does the job for my extended U-bolts from ToyTec. Torqued to 83 ft lbs. First time around takes some force to get into the dimples. Haven't tested to 90 ft lbs yet. Takes a beating on the aesthetics. Only time will tell. Happy with the fast shipping.
Recommended Products
$10.41
$ 4 .99 $4.99