Your cart is empty.
Your cart is empty.Save time & cover more ground with the Valley Industries Universal Brass broadcast spray boomless nozzle. In matter of s, have a single nozzle mounted to your broadcast sprayer that allowsup to 52' Of coverage. Includes 2 interchangeable caps that allows for 90° & 180° spraying. 90° spraying is perfect for applications that encounter obstacles such as fences or trees during the application. 180° spraying provides full coverage & is more Ideal for open surfaces. Ideal use with 3.0GPM or higher volume 12V pumps. Composed of Brass for increased wear resistance. Features a ½” NPT connection & includes 3/8” reducer Bushing. Ideal mounting heights between 24”-48”.
Josh Elkins
Reviewed in the United States on August 11, 2024
I have this head mounted on the back of a Polaris 500 at 34” above grade. With a 5.5 gpm, 60 psi pump, the 180 degree plate produces a pattern about 6 feet wider than the ATV. It is a disappointment. Now, to find a replacement that works. I love buying stuff twice.
Thomas Harris
Reviewed in the United States on November 24, 2024
This is a great product, beats cleaning screeners on 24 separate tips and achieves the very same results !But if Your not getting the desired results, try this: If its to do with fan width to narrow, instead of having the fan spray aimed down, plumb it where it can spray directly behind where your traveling and horizontal to the ground, if width continues to be to narrow, raise the tip up higher as needed to achieve results, this can be obtained with any source of rigid pipe. I used a 1/2 in. 90 degree elbow and 10 feet of aluminum pipe.
Eddie
Reviewed in the United States on April 26, 2022
The media could not be loaded.
WBrown
Reviewed in the United States on September 5, 2021
Excellent. Took a few swipes with a file to perfect the pattern - great after that. Would buy again, but shouldn't need to.
allen
Reviewed in the United States on March 12, 2021
It isn’t obvious to begin with but both caps need to be taken off and the one you want to use should be mounted first.One is for 180° spraying in one is for 90°.This wasn’t obvious in the directions
Customer
Reviewed in the United States on December 6, 2021
I did have to increase the size of the pump to 2.2 Gallons a minute on my spray tank to take full advantage of the 27-30 foot wide spray pattern.
Pop36
Reviewed in the United States on June 7, 2020
The 1/2 x 3/8 brass female bushings threads were damaged. I was unable to use it.
rme
Reviewed in the United States on September 12, 2019
I have 2 of these on a 100gal orchard sprayer. About 45' of good coverage around 40psi for 180 nozzle
Recommended Products
