Your cart is empty.
Your cart is empty.Valterra's A10-1310VP Bug Screen for RV Refrigerator Vents are designed to fit Norcold refrigerator vents with 19.75" louver openings. They are easy to install and offer minimal airflow restriction while ensuring that your vents stay free from costly invasion by unwanted pests (nesting insects, birds, and rodents). Screens should be inspected monthly and cleaned when necessary to maintain proper air flow. Screen measures 1.3" x 19.6".
Vonnie
Reviewed in the United States on July 6, 2024
It fit into the slots however when zip tying them it left a small gap on the top so I had to use black tape to secure this problem. Poor fit...good quality material.
Tracey Moldenhauer
Reviewed in Canada on June 16, 2024
They worked for our vents perfectly! Don’t want bugs in our RV!
Teresa V.
Reviewed in the United States on June 1, 2024
Works great
Scott Jeffery
Reviewed in the United States on December 30, 2024
Fit perfectly. Not enough zip ties. I used bread twisties for a better securement.
Deb Jones
Reviewed in Canada on October 24, 2024
Mouse chewed a piece off of the Norcold rv vent cover to gain access and make a nest. I installed these stainless steel vent screens over the existing plastic vents and they were a perfect fit. I can now have peace of mind that I won't have to deal with anymore bugs or mice getting behind the fridge for winter nesting. These are well constructed and will last forever.
Frederick Moore
Reviewed in the United States on October 12, 2024
Fit perfectly. I added more Ty-wraps than the ones included.
Lm
Reviewed in the United States on August 4, 2023
I have a 2023 white hawk 25MBH with Furrion 12v fridge. These are a perfect fit. Yes you will need more zip ties if you don’t like minor gaps and want a cleaner look. I keep stock on all sizes of zip ties, just make sure they are the smaller ones.
Dale. B
Reviewed in Canada on July 20, 2023
Easy to install
One wild truck
Reviewed in Canada on March 8, 2022
Fit like a glove. For the price of a tie straps they could give u more.
BigBill
Reviewed in the United States on January 25, 2021
They only come with 2 miniature tie-wraps for each screen but that just didn't hold them tight enough so after installing the three screens I found my can of miniature tie wraps and added three more to each screen. Now they are secure, they are held flush up to the bottom of the vents out of the sun so the tie-wraps should hold a long time. I should have done this a long time ago, especially after watching the rvgeeks video where there was a bat living behind their fridge. I put in a residential fridge last year so the vents aren't really needed anymore and will eventually figure out how to seal and insulate this cover. I still need to get to the back of the fridge as that is where the water shutoff is and also the switch to turn off the fridge for storage.
Grampy Red
Reviewed in Canada on August 10, 2020
Screens fit perfectly, would have been nice to receive an additional 6 tie wraps with the ones included in the kit. Due to the length of the screens I found that two per screen were insufficient to obtain a snug fit against the vent
EGReviews
Reviewed in the United States on July 7, 2020
I purchased these for the fridge vent on a jayco 224BH. It worked perfectly. I have absolutely nothing negative to say about these.I had returned two other brands that claimed to fit but didn’t before I found this set.Other brands left gaps large enough for wasps to enter. These fit perfect.I do recommend you add at least one more wire tie to each screen. This allows you to secure them on the ends and in the center to prevent bowing.
William Van Auken
Reviewed in the United States on February 23, 2019
These bug screens fit very nicely and made well. My only issue was that the zip ties were somewhat difficult to locate into the screen grid holes to where the screen is pulled back flush to the vent hole opening. Also, when tightening the zip tie, they had a tendency to break the zip "tang" that holes the tension and locks the tie. I used 22 gauge wire instead and twisted the wire ends on the back side of the vent in order to tension them using either a pair of needle nose or regular pliers. Not only was this easier, but I think the wire will last a lot longer as plastic zip ties tend to get brittle and break over time. And the fact that these screens will be exposed to heat, the wire will stand up better over time. I was afraid having the zip ties break and then the screen falling out and loosing it forever on some highway.
Recommended Products
$20.95
$ 10 .99 $10.99