Your cart is empty.
Your cart is empty.Product Description
Valu-Air 18 Gauge 2-in-1 Brad Nailer & Stapler
Applications
Cabinet, trim, baseboard, chair rail, and finish work
Features
360° tool-free air exhaust .Heat treated aluminum housing .Tool-free depth adjustment . Quick Jam Release. No-mar tip protects work surfaces . High capacity magazine holds up to 100 nails
Specifications
Weight: 3.3lb .Dimension: 9.8"x9.7"x2.2" .Operating Pressure: 70-110 PSI .Fastener Type: 18 Gauge Brad Nails/18 Gauge Narrow Crown Staples .Fastener Length: 18-ga. brad nails from 5/8” up to 2” and 18-ga. 1/4” crown staples from 5/8” up to 1 5/8"
Included with tool:
- Durable Blow Mold Carry Case
- Hex Wrenches
- Air Tool Oil
- 1 Strip of 18GA Nails
- 1 Strip of 18GA Staples
A Quick Start Guide
Lubricate the nailer
Before using, apply 3-4 drops of lubrication oil into the air plug.
Open the Magazine
Press the stop lever and gently pull out the magazine cover.
Loading Nails/Staples
Set nail/staple strip into the magazine and keep the points fo nails/staples in contact with groove.
Slide the nail/staple strip into the blade guide and push the magazine cover forward to be latched.
Operation
Adjust air compressor pressure at 60-110 psi. Connect the compressor's air hose to nailer's air plug. To fire, press the tip against the wood then pull the trigger, or pull the trigger then press the tip against the wood.
Tina Gross
Reviewed in the United States on June 9, 2024
Well made very useful
James A. Mullins
Reviewed in the United States on June 15, 2024
Depth adjustment prevents driving brads/staples through thin material like paneling. Consistent brad/staple driving prevents repeats. I am very happy with this product.
David D
Reviewed in the United States on December 8, 2024
I truly wish I could give a better rating. I purchased this nail gun along with several other Valu-Air nail guns. I was really impressed with them. I was helping a contractor friend, on a volunteer project and he chuckled when I pulled my orange nailers out of my truck. After the first few nails I shot, he asked if he could look at it. I spent the rest of the day using his high dollar professional nailer. I think he would have packed up with his tools if I would have allowed him too.Thats the good, now for the bad. I lost the rubber no mar tip to my Valu-Air SF5040. I have tried repeatedly to contact the manufacturer to purchase new ones. After almost two months of trying and not receiving a reply I have all but given up hope. I guess if anything major happens, I will have to throw it in the trash instead of repairing it.
vman
Reviewed in the United States on April 28, 2022
Bought it just to do underlayment for a floor. For the price to do this one job, but it is well made and works flawlessly. Keeps on going and going. Worth the money.
onepiper
Reviewed in the United States on February 6, 2020
This tool is just what I wanted...inexpensive, light, easy to set up & operate. It takes up to 2" nails & staples and comes with a starter pack of both (2") as well as a small bottle or nailer oil.
Robert Casto
Reviewed in the United States on April 21, 2018
I recieved this product and the only complaint I have is that it does not come with a manual that explains how to use it. The manual that comes with it gives you quick familiarization but that’s it. Thank goodness for google..lol. But it works well and saves on the smacked fingers from trying to drive in small nails. It helped make my tank stand project go a lot quicker.
Customer
Reviewed in the United States on March 4, 2017
Good ValueSurprised at fast delivery. Found tool to have heft feeling Delighted with versatility for two different fasteners. Woks perfectly for the type hobby work I do, would recommend for anyone who has need for this type nail gun.
ozamA
Reviewed in the United States on February 23, 2017
This is my second go-round with this design of nailer. I lost the first one in a house fire and had to replace it. I chose to replace it with the same model because this one works very well for what I'm doing right now. I'm building a kennel out of field fence and lumber. I use the nailer to staple the wire of the field fence to the lumber. This model works very well for that because of the depth gauge. I file a small indention right in the middle of the tip of the depth gauge then use it to press the wire against the wood. I can even move the fence around with the depth gauge a bit and tighten the fence a little if need be. Then because of the indention, the rather thin staple comes down on either side of the fence wire every time. With other guns without the depth gauge, I was jamming the gun when the staple hit the wire. On this one, not only does the depth gauge work to prevent smashing the fence wire but the notch I put in the tip of the depth gauge makes me on target every time. No missing, no jams, and as I said, I can work the wire of the fence a bit. BTW, the notch doesn't have to be deep. Just past visible works for me. I made it very shallow with a triangle file. Not nearly deep enough to weaken the depth gauge. I was shocked how much command I had over the wire with such a small indention.
Recommended Products
$159.99
$ 77 .99 $77.99