Your cart is empty.
Your cart is empty.Customer
Reviewed in the United States on March 17, 2025
Ya hace más de un año creo de este producto y está genial es en mi bodega se usa modo industrial y súper bien
Maurice Mc Loughlin
Reviewed in Canada on February 8, 2025
It’s fine, great quality, does what it’s supposed to do, I can’t fault it. I do with there was a rubber ledge of some sort to stop the mouse and keyboard sliding off every time. I have to add Velcro to the devices.
XsiTec
Reviewed in Germany on January 11, 2025
Zuersteinmal sei gesagt, das der Arm sehr gut aussieht und die Verarbeitung eigentlich auch sehr gut ist. Er lässt sich leicht und eigentlich sogar ohne die nur in Englisch beigelegte Montageanleitung montieren. Auch die Verstellbarkeit ist vollkommen ausreichend umgesetzt, so dass man ihn sowohl im Sitzen als auch im Stehen gut verwenden und auch bei etwas Platzmangel oder unterschiedlichen Entfernungen vom Monitor montieren und verwenden kann.Soweit zu den positiven Punkten.Was aber gleich beim ersten Gebrauch negativ auffällt ist, dass man den Arm nicht wirklich belasten kann. D.h. eine Auflage der Hände auf der Halteplatte oder der bei manchen Tastaturen dafür vorgesehenen Auflage kann man knicken. Der Arm gibt in diesem Fall einfach zu schnell nach wodurch eine stabile und ablenkungsfreie Arbeitsweise nicht gegeben ist.Ich hab dann auch mal das Gewicht meiner Handauflage mit einer Wage gemessen und lag dabei so zwischen 5 und 8 kg.Laut der Abbildung sollte die Halterung bis zu 8kg (17,6 lbs) tragen ….. naja, tragen tut sie es ja aber stabil ist dann doch was anderes.Das nächste ist die Tastatur und Mausablage ….Was soll ich sagen, wer hatte eigentlich die Idee auf der Unterseite die Biegung nach unten auszuführe ? Schräg stellen ist damit schon mal raus auch wenn für die Tastatur witzigerweise Greb-Pads mit dabei liegen - was für die Maus natürlich ausfällt außer man verwendet vielleicht eine mit Trackball, dann wäre das noch gerade OK so denke ich. Aber dann kommen wir zur Fixierung der Neigung der Ablage – diese ist kurz gesagt nicht vorhanden. Man kann zwar über eine Madenschraube die max. Neigung nach unten begrenzen, ohne das wäre die Halterung auch komplett raus, aber wenn man die Neigung dann nach oben ändert, dann klappt sie schon durch etwas Belastung wieder zurück auf die Madenschraube. Komisch ist auch, dass sie sich nach oben schwerer verstellen lässt als nach unten was ja eigentlich umgekehrt sein sollte …. Ich habe es natürlich mehrfach geprüft aber nichts gefunden durch das man dieses Verhalten ändern könnte.Schade, wäre eigentlich die perfekte Lösung für meinen Anwendungsfall gewesen und ich hatte mir von einer VIVO Lösung, zu diesem Preis, auch mehr versprochen. Daher auch noch ein Stern weniger.Zusammenfassen kann ich diesen Artikel also so bewerten :Gut gedacht um umgesetzt aber zu schwach ausgeführt und deshalb nur sehr bedingt verwendbar.
Geoff Radons
Reviewed in Canada on September 21, 2024
My original for this tray had something happen to it in transit so I never received it and I had to reorder. I think that was the god of fate trying to tell me something and I was too damn deaf to listen.The tray is very narrow and really only suitable for a simple small keyboard that isn't very deep at all. If you have anything deeper than a generic small format then you're going to have over hang everywhere.Its a wall mount keyboard tray that is expected to hold a mouse too. As most people know, you generally have your keyboard slightly tilted towards you even when standing. That would usually mean that you'd place a lip on the tray along the front edge closest to the user so that when the keyboard is tilted towards you it doesn't fall off the tray into your lap or the mouse doesn't go for a roll around on the floor. These bozos put the lip on the back side furthest away from the user. Why?!This gives you two options:#1 You use the lip along the top as a means to hook your keyboard so it doesn't slip off the tray and that gives you some tilt but make the keyboard somewhat unstable or...#2 You have it sitting flat on the tray with an over hang along the front that makes it more prone to falling off as you try to keep the tray as level as possible.In addition, the lack of a front edge lip also means that you play pick up with your mouse every few minutes as it slowly slides off the tray. Even when you think you've made the tray level, as you type the tray flexes downward and the mouse creeps towards the edge leaping off presumably looking for a better home. I guess you could use one of those trackball mice that sit stationary as you roll the trackball around with your thumb, but should I really be forced to go buy a new mouse for a tray that should have reversed the lip in the first place?I really think you can do better than buying this.Its a very poor design and could have been fixed early in production if someone had simply decided to try the thing out in real life.
Pedjy
Reviewed in France on August 14, 2024
J’ai pu fixer ce support sur le côté de mon profilé de Sim Racing afin d’avoir le clavier à ma portée. Bouge un peu quand il est détendu mais ce n’est pas fait pour taper un roman. Pour mon emploi en Sim Racing cela convient très bien.
Customer
Reviewed in the United States on May 3, 2024
There is a "lean" at the joints that can make the tray surface slightly tilt when stretched at certain angles. The tray will end up not being perfectly level, but overall works.Otherwise relatively easy to assemble, and sturdy. Also not quite deep enough to fully support large keyboards but still holds them up.
Chuff
Reviewed in the United States on February 3, 2024
This product is sturdy but the keyboard tray doesn't stay in place. The product documentation states that the tray can be positioned at different angles. As soon as you type, the tray is angled downward, and the mouse ends up falling. I've tightened the nuts and still experienced the same issue.
richardfalzon
Reviewed in Australia on December 27, 2024
Mounted easily and operates as required, mounting a ergonomic keyboard and mouse may be tight but do-able
Anthony Stewart
Reviewed in the United States on November 2, 2024
Bought it and used it once. Took it dow after attempting and hasn't moved since. So the Bae is solid, doe to the screws given to use.After getting it installed I sit down and just like a previous comment, my mouse rolled right off.After sitting and pulling the keyboard out, I was met with very little wrist room, wobbly base, and overall unusable product.
Sergio
Reviewed in the United States on November 16, 2024
Good work well
Alwyn Swarts
Reviewed in the United States on October 10, 2024
Just what I needed for easy use and out of the way in sim racing
Deb in Jersey
Reviewed in the United States on January 11, 2024
Very sturdy and works exactly as advertised. Installation was as expected. Can be tricky for a newbie (still doable, though) but not for anyone with experience. I actually attached it to my headboard to use as a bedside table. I love it.
VP
Reviewed in the United States on April 17, 2024
This product has theoretical appeal, but the design/execution is flawed. There is simply no way to keep the arm sturdy. The platform constantly bounces around, which makes it nearly impossible to type. It's practical uses are very limited (i.e., occasional keyboard use) and not for any regular typing. On the plus side, it is an easy product to install and is well packaged.
Recommended Products