Your cart is empty.
Your cart is empty. Packing list :
1× 30Pin Signal Cable for eDP LCD Screen
Legit Reviews Only
Reviewed in the United States on January 15, 2025
I needed this cable to repair the back glass of a virtual pinball machine. It lined up perfectly and the machine works like new. (I thought I may have to throw out the entire machine.0
John B
Reviewed in the United States on November 24, 2024
I believe you need a "type A" edp cable for the Atgames Legends, just know this isn't the right one.
Jason T. Countryman
Reviewed in the United States on September 23, 2023
This was a perfect drop-in replacement for the cable that goes from the VIBS board to the backbox display. Actually, it's a better replacement as the length lets you move the board to somewhere a little more easy to secure in the box.
D. Campbell
Reviewed in the United States on February 15, 2023
Bought this ribbon cable as it was recommended to replace the stock cable in the ATGames Legends Pinball.This is used to connect the stock backglass to the either the vibs (if installed) or the machine.The connector on the plug end is upside down, causing the connections to be reversed when installed. I tried to figure out a way to flip it over and plug it in, but it wasn't happening. Ended up breaking the first (good thing you get 2).I was able to get it to work by taking the silver connector end and folding it in half so there were connectors on both sides.Once this was done, I was able to connect it properly and it worked.It's a shame that the cable requires this, and I'm not sure if it will last, but for now it's working.I don't know if there is an alternative that is manufactured correctly for this but there needs to be.
Bradley Simard
Reviewed in Canada on January 8, 2022
They only worked if you held them at a very specific angle.eDP ribbon cables are fairly fragile, but this is beyond what should be considered acceptable.Buy something else.
Astor03
Reviewed in the United States on July 11, 2021
This ribbon cable worked perfectly to connect an old laptop display to my LattePanda Alpha. The only thing to be aware of is that this ribbon cable is extremely fragile, and I ended up breaking the first one I ordered by bending it a little too far.
Mike
Reviewed in the United States on March 10, 2021
This is the perfect replacement for a 30-Pin eDP 1.3 cable that directly interfaces to an LCD panel.
roboticwizzard
Reviewed in the United States on December 3, 2021
cable for laptop screen and came quickly in mail.
John C Lemme
Reviewed in the United States on October 23, 2020
Bought this for a homemade board that needed to talk to an embedded DisplayPort panel. The cable is of good quality, but there's no shielding or any attempt at noise reduction so it only barely carries a DP signal. Had to be holding it for any picture to appear.
Recommended Products
$27.95
$ 14 .99 $14.99