Your cart is empty.
Your cart is empty.WARN 101255 Winch Mount for Jeep Gladiator JT & Wrangler JL
Customer
Reviewed in the United States on March 12, 2025
The media could not be loaded.
Becky
Reviewed in the United States on March 1, 2025
Quality product but not installed yet. Heavy duty.
Mike
Reviewed in the United States on February 15, 2025
Perfect fit, easy to install.
Adrian Simi
Reviewed in the United States on January 5, 2025
Took a little re-engineering for a new Warn Zeon 10S to fit correctly. Bolt pattern was 1/4” short. Took a little drilling and filing to get right. If you’re not patient or don’t have more tools than wife thinks you need, you probably should have it installed by a real professional. LOL. Overall I like the design and fit for the JEEP JL.
Matt H
Reviewed in Canada on September 7, 2024
Bought this for my Rubicon with the steel bumper. Instructions were adequate, but YouTube videos show the process to watch before you install.Very happy with the purchase. Fitment was excellent.
Lordmercy
Reviewed in Saudi Arabia on February 13, 2024
جودة عالية وسهل التركيب ولا يحتاج اي تعديلات ويمكن استخدامه لكل المنشات التي تسقط في المساحة المحددة بين أعمدة الشاص والتي يثبت عليها الصدام في اليوتوب يوجد شخص مركب هذا القاعدة علي جيب سبورت مع انه مخصص لصدمات الروبيكان
marc
Reviewed in the United States on November 5, 2024
Solid solution for my oem front steel bumper.Good instructions but they include a metal cover plate installed between the fairling and the bumper and is not mentioned in instructions had to remove fairling and installAlso original hardware bolts are too short so get some longer bolts sobyoundontngave to go to the store in the middle of the instsll
Peter B Aldrich
Reviewed in Canada on June 20, 2023
Works great, and an easy install. Only suggestions is to have a pin handy to help align bolts, and start all bolts before tightening.
JET
Reviewed in the United States on June 17, 2023
This is a sturdy mount, well built and packagedl. With this winch plate, I mounted a HF Badlands Apex 12k winch on my Gladiator, with no problems. For my application, I had to buy longer bolts for the fairlead, I went with a 55mm length from Fastenal.Installation Tips for a Jeep Gladiator:- You will need to lengthen the two holes at the rear of the skid plate. Slot these two holes going towards the rear of the vehicle by approximately 3/8". Do this first.- Do the "Jeep grill mod" once you have the bumper off, before installing anything. Consists of removing the grill (very easy, check YouTube), removing the 4 bottom inner retainer clips, but leaving the two outer clips on the bottom of the grill. This allows you to remove the grill in the future without removing the winch. Pop each side out, pull up to remove after the mod.- Leave the grill off until the winch is installed, this prevents scratching it up and allows easier routing of the wiring. It's easy to install once the winch is mounted.- For the Badlands Apex winch, move the positive winch wire that comes out the side of the winch towards the grill. Drill a 3/4" hole in the "electrical box" on the left-hand side, above the motor connections. Re-route the positive lead to come straight out the left-hand side of the winch. Google Apex winch wiring mod. It's not hard to do. The positive cable will press up against the grill if you don't do this. The electrical box is not waterproof anyway.- There are two brackets on the winch plate that get installed to the Gladiator frame, leave all the bolts loose until after the bumper is fully tightened, before the winch is bolted to the Warn plate.- Use a piece of tape to hold the (4) mounting nuts at the bottom of the winch, these are the winch to Warn plate bolts. Do not bolt the winch down to the Warn plate until the bumper retaining buts are ALL completely tightened. This allows you to move the winch from side to side so you can access the hard to reach inner bumper mounting nuts.- Once the bumper is properly fastened, then you can tighten down the fairlead bolts, and then the winch plate bracket bolts.- There is a spot next to the battery that you can mount the switch that comes with the Apex winch. A sturdy piece of aluminum works well. Remove the factory bolt for the fender on the edge, there is another threaded hole approximately 3-4" towards the front of the vehicle. Obtain a bolt to use, mount your bracket for the switch here.Overall, the installation took me 3 hours, it was not bad at all. Everything lined up nicely. Since I did the above steps before starting it went quickly. Concerning mounting the winch to the Warn plate, The tape holds the nuts, but they will move a little, use a small piece of stiff wire to "align" the nuts with the holes in the winch plate.
Matt Remillard
Reviewed in the United States on October 20, 2023
Great, sturdy product. Install was pretty straight forward
Brendan Dunne
Reviewed in Canada on October 19, 2023
I’m not one for reviews, initially it was understood that this would not fit my 21’ Rubicon, but took a chance and ordered it and boom.. what a perfect fit, and excellent communication with the seller before and after sale.. don’t hesitate on this purchase..
maureen floyd
Reviewed in Canada on April 30, 2022
Everything went together as expected on my 2021 rubicon. And if you follow the instructions as defined there was no need to modify any of the mounting holes.Everything lined up exactly as expected. Only complaint was that the provided zip ties that are critical for installation, were not the correct size to do the job. If I didn’t have some of my own already that worked id have been pretty upset.Warn just needs better quality control on their packaging line.
Mike Roberson
Reviewed in the United States on November 3, 2020
I bought this winch plate along with the Warn Zeon 12-S winch. The mount plate is stout and feels more than adequate to withstand a 12,000lb pull. The mounting instructions were straightforward, it came with all the needed hardware.One item of note: You will need to notch the back mount holes on your skid plate 1/4” to accommodate the 1/4” you are moving your bumper forward.
Recommended Products
