Shopping Cart

Your cart is empty.

Your cart is empty.

WZRELB 5000W Continuous Power Pure Sine Wave Inverter 24V DC to 110V 120V AC Solar Power Inverter with Remote Control LED Display and Dual AC Outlets for Home RV Truck Boat Camping

Free shipping on orders over $29.99

$239.00

$ 99 .00 $99.00

In Stock

About this item

  • Provides 5000watt pure sine wave power, 10000watt surge power inverter, single phase,convering DC 24 volt to AC 110~120 volt with 2 AC outlets and a 41.6amp AC hardwire terminal and patient customer after-service,one year Warranty
  • With Remote Controller: Easy to switch the inverter ON/OFF remotely with a 16.4 feet cable. LED display, allow to monitor battery voltage and AC output voltage in real time
  • Intelligent Cooling System with 60*60mm powerful fan : provide your powerful airflow, promoting air circulation .Built in Large area aluminum alloy radiator for maximum cooling efficiency,keep your loads running at full potntial without any drops
  • PROTECTIONS: overload, over temp, high voltage, low voltage, short circuit, internally fused, low and high voltage alarm, cooling fan, and isolated ground neutral
  • WHAT YOU GET-1x 5000W Pure Sine Inverter, 1x User Manual, 2 Set of Battery Cables(2xRed,2xBlack), 1x remote control


About us: We are professional manufacturer of pure sine wave inverter since 2009. Top quality and responsible service are guaranteed. Customer service is responsive within 24 hours.
Inverter details:
DC input: 24V
DC input range: 21V-30V
No Load Current Draw: 1A
Efficiency:85%-90%
AC output: 120V
AC Regulation:3%
Frequency: 60Hz
Socket:15a USA type Low Voltage Alarm:19.5V-21.5V
Low Voltage Shut Down: 18.5V-20.5V
Over Load: shut off, recover manually
Over Voltage Shut Down:30.5V
Over Thermal: Shut Off Output Automatically, Over voltage protection
Automatic Cooling Ways: Cooling Fan will run when the temperature is over 122℉
Precautions:
1. Please use the standard battery cables we sent, or a full power output may not be guaranteed. And the fuse are just spare parts.
2. Please do not connect the inverter with the grid power, and a reverse connection of positive and negative is also forbidden.
3. Please do not overload. If your applications are inductive loads, please choose the inverters whose continuous power is 3-7 times higher than the watts of your appliances. If you want to power up a refrigerator, we suggest you use 10 times higher power inverter.
4. Please turn off the load first then turn off the inverter. And as there is a soft start function, please turn on the inverter first then turn on your loads, or the output may not stable at the first seconds.
5. For a red light flashing, it is a kind reminder to note you the input voltage is a bit high, you can regardless of it. If the input is too high, the inverter will shut down automaticly.


Ally
Reviewed in the United States on July 18, 2023
3rd update 100 days- Broken! Alarms for " short circuit protection" displays 0 VAC will get up to 10 VAc or less than 10% of rated voltage and alarm and shut off. Tech support claimed it could be bonded black wire or neutral to ground. Then 48 hrs later it broke with a load of 1500 watts. Now I have no power, no warranty and no help from tech support. Wish I could get my $$ back or a replacement at the least. So sad. Paid $700 with tax. I would not buy this ever again if I was refunded to late now past the 30 day refund policy .----70 day update: it runs almost everything A fridge, chest freezer, small washer, but it has failed to run my small 13 amp 120 electric dryer! So I don't think you can claim 5000 continuous watts. After 10-15 mins at 120 Degrees F it overpower protection cuts off the voltage. Which doesn't make a lot of since considering I can run 15 amps of any other power draw. Maybe the heater draws more than 15 amps? But why would my 20 amp breaker not trip then? If it's 5000 watts that's 40 amps but I can't get 20 off it continually. No wires are hot not even warm. No breakers on DC side trip or burn out and they are rated 200 amp DC.Wish it would run the heater on my dryer now I'm disappointed in it's rating. I need to be able to run a dryer to be fully off grid.----First off the 62 volt + 62 volt you see on the hot and neutral are phantom voltage from the Shunt used to monitor those legs. I was worried about it myself but it can't draw amperage at those volts cause it's just a shunt/microcontroller reading in parallel according to the manufacturer.I stuck with the same brand unit i bought 7 years ago that used to call itself "reliable power" now known as WZRELB . It had a good track record for me with over 2,5000 days or 7 years of continuous use and still running to this day with no issues. I thought why go with anyone else?A youtube channel torture tested this brand with 15 amp chops saws and heat guns and it held up never tripped. So i wanted something to run a whole house/ trailer on Solar. This has only been running for about a week or less but so far it runs my AC, Fridge, freezer, vacuum , toaster oven, microwave all without issue. Only time will tell but i hope it lasts at least 7 years like my last one thats still running to this day. One thing it would not do is a 20amp hot water heater i just had to see what tripped it! it puts out a steady 120 VAC and runs off a 800 AH 24 vdc battery bank SLA or FLA 200 AH ea/ X 4 with 2 AWG pure copper jumpers. WIll update in time with performance.----35 day updateHad to switch to a 200 amp breaker to remove the resistance that wasnt allowing me to run my toaster oven. Then i found out the 200 amp was tripping. My own fault, accidently turned on the 20amp hot water heater! This inverter was running 40-50 amps AC or 400 to 500 amps on the DC without me even knowing it. It wasnt shutting off either, no the breaker was to protect it from drawing to much! Im amazed . Added 2 more batteries total lf 6 200 amp hr SLA . Its really only limited by how muvh batteries it can draw from.I have yet to test a chop saw at 15 amps but i wouldnt doubt it would run it no problem . Now im temped to drag it out just to see. Then again i have no need to run a chop saw atm. The fan runs a lot with what im drawing but thats expected.
Alex
Reviewed in the United States on June 26, 2023
Lo uso para emergencias, para cuando se va la Luz. Muevo toda la casa con excepcion de los aires acondicionados hasta un limite de 2000 watts.La calidad es muy buena.Lo recomiendo
Louise stevenson
Reviewed in the United States on September 25, 2020
Works great in my camper!!! Definitely does it's job.
Customer
Reviewed in the United States on September 12, 2020
Worked as desired for my application. Would recommend.
Maddmann
Reviewed in the United States on July 20, 2020
I used this inverter with a custom built battery for mobility. The power remote added the feature that makes me not have to open the box to turn the unit on. I am also getting the rated power output!!
Andrew Paul Reynolds
Reviewed in the United States on July 17, 2020
So far so good. I plan to use this inverter for my camper to run the small refrigerator and power smaller AC devices. I measured the refrigerator at 330watts and tested the inverter when I recurved it. I was measuring right at 90% efficiency at 342 watts and 87% efficiency with a 100 watt fan. Pretty good! The inverter started up the refrigerator with no problem.The only negative so far is I wish the remote switch it came with had the voltage display on it instead of the main unit as this will be out of sight.I will add to this review once I have it installed and have used it some.
J. Prewitt
Reviewed in the United States on November 27, 2020
Will not properly start a 15amp miter saw or other power tools. The miter saw buck and stutters on start up. Found the ac voltage only 60v on load terminal and 60v on neutral terminal. This is not US code and popwer tools are not designed to run on a split voltage ac circuit. Also, the grounding lug is nothing more than a brass screw that when nut is loosened (very difficult to loosen when it is unsecured inside the unit. I will not remove the cover for warranty reasons. The ground lug should have been a permanent attached lug, not a small screw that has to be held by small needle nose pliers to l;loosen the nut. Be aware this is a floating ground unit, not suitable for power tools. Works ok with tv and lights. Do not recommend this to solar users. Also, seller should have listed this unit as having a floating ground. Will not buy from this company again.
Customer
Reviewed in the United States on November 25, 2020
This inverter works really well! I made a simple PCB to automatically start it at a set battery voltage and shutdown at another set voltage. This was possible through the remote start rj-45 port. I love this inverter! It truly works well and reliably every time!
Recommended Products