Shopping Cart

Your cart is empty.

Your cart is empty.

X X-HOUSE Driveway Vehicle Sensor for Automatic Gate Opener Vehicle Exit Sensor Kit Wired Exit Wand Driveway Car Vehicle Detector 50FT.Black

Free shipping on orders over $29.99

$16.99

$ 7 .99 $7.99

In Stock
  • EASY DIY (DO IT YOURSELF): Easy installation.Connects directly to the control board of gate operator.When the vehicle is driving within the sensing range of 2-12 feet from the ground sensor, the ground sensor will trigger your door opener, which is very suitable for receiving customers and going out, The assistant for smart doors and windows,freeing your hands
  • AUTOMATICALLY SENSES: Automatically senses your vehicle leaving the property and opens the gate.Compatible with most Mighty Mule / Ghost Controls / LiftMaster door opener systems. It supports the control board to provide 12-24VDC or 12-24VAC auxiliary power
  • INDUCED MAGNETIC FIELD: By sensing the change in the earth's magnetic field caused by the movement of the vehicle, it automatically opens your door, you don't need to do anything.
  • SUITABLE FOR THE SCENE: Very suitable for residential, farm, commercial applications, able to detect the actions of cars, trucks, motorcycles, ATVs, etc.



Product Description

X-XHOUSE

1

X-XHOUSE Vehicle Exit Sensor

Let the wand open the gates for you and for your guests while going out! No more remotes or keypads to trigger your gate openers! Our UNIVERSALLY COMPATIBLE exit wand connects with almost all automatic gate openers! Just drive past the buried wand, it will make the gates open for you and for your guests!

2

RUBBER GLAND PROTECTION

Rubber gland protection to prevent water entry into wand and avoid cable damages! fcc compliant!

3

5-CORE CABLE

5-CORE CABLE control the sensitivity of the cable, it enables the wand to open the door faster and more safely.

The quality of 5-CORE CABLE is better than that of ordinary cables on the market, but it can meet the induction needs of the ground sensor.

4

RANGE ADJUSTMENT BOARD

Limit wand sensing range to sense your car and other metal equipment (such as lawn mowers), prevent false opening of your gate by lawn mowers through the Range adjustment board.

WORKING PRINCIPLE DIAGRAM

1

  • Once the place of the wand has been determined, you can start installing the wand. Dig a hole approximately 2 inches deep and 24 inches long within 2 feet and parallel to the edge of the driveway.
  • Next, dig a trench from this hole to a spot under the gate opener control box to run the cable from the WAND to the control box. Size of the trench is related to the size of the PVC conduit.
  • Keep the WAND and the cable uncovered before the function has been tested OK.

Technical specifications

Cable Length 50 FT
Exit Wand Length 54 CM
Operating Voltage 12-24V
Weight 6.1729 lb
Notes Product size: Sense Range: 2 to 12 ft. (0.61 m --3.66 m) Radius of the Wand Power Req

Q: Is it compatible with my door opener system?

A: The control board of the gate opener needs to have the normal open & dry contact output to be compatible to our Vehicle Exit Sensor Wand. The circuit board needs to provide AC/DC 12-24V output voltage, otherwise an extra power source is needed.

Q: Need to buy a battery separately?

A: The ground sensor does not need batteries, it can work when connected to the port.

Q: Where should I bury the Earth Sense Rod

A: Buried 12-18 inches underground next to the driveway.

Q:Does it work on which vehicles?

A:It detects vehicles (cars, trucks, motorcycles, ATV's, etc.)

WIRING INSTRUCTIONS

wire connection

Definition of the 5 –core cable:

RED →Input Voltage (+)

GREEN →Ground/Common (-)

BLACK →Relay’s Common

BLUE →Relay’s Normally Open

YELLOW →Range adjustment potentiometer (POT)

  • DC power supply (12-24 VDC)
  • Connect the positive (+) wire of the power supply to the RED wire.
  • Connect the negative (-) wire of the power supply to the GREEN wire.
  • AC power supply (12-24 VAC)
  • Connect the power supply to the RED and GREEN wire, no matter the polarity of the wires.

Me
Reviewed in the United States on September 4, 2024
Hardware NOT included?! I get that different gates have different thicknesses etc, but NOTHING?? Not cool.UPDATED: I had my batteries for the fence die; either defective or solar box not working (not certain which, YET) and this lock, since I’d installed it near the top of my fence let me STILL feel like the gate was serving its purpose.I had to manually reach over and use my key, but once opened, after closing again it re-locks itself - with or without power from the board/box! So it DEFINITELY earned back the stars I’d not given it from lacking nuts & bolts.UPDATE (again!).. So after the gate mfg sent me a new solar control box, I hooked it all up again and GUESS which LOCK was the ONLY part that would NOT function correctly?.? YUP; THIS ONE!Knocked rating down to 2 stars HOPING I can find a resolution!! 😤😠
Randall V.
Reviewed in the United States on September 2, 2024
Keeps people from pushing their way past the gate. Keeps all the adjustments in place.
Tom Hall
Reviewed in the United States on August 17, 2024
Works great with out ghost system and easy to install. Had no issues except digging in the clay we call dirt in Georgia.Update: just about a month in the ground it stopped working.New update: I found that the cable was damaged somehow and I was able to repair the cable and it works again. My only issue is the outer insulation needs to be more durable. Just glad it still works.
Roger Dale Sayers
Reviewed in the United States on March 18, 2024
This lock is well made but it doesn't come with any mounting hardware nor instructions for the electrical connection.
tabetha
Reviewed in Canada on April 20, 2024
Pretty good latch froze up once or twice in extreme winter and just needed a little lube other then that has worked perfectly
BigDaddyJohnson
Reviewed in Canada on September 30, 2023
Used this with a Topens gate opener. Worked out of the box so far without the relay module. Solid construction.
SSIDave
Reviewed in Canada on September 12, 2023
I bought this as its considerably cheaper than the Topens product and appears to have the same specs.Its fully compatible with the Topens 500 series gate opener and is a useful addition to the system.I have had some issues with the lock binding but in fairness that is because the wind blows the gates past their end position. The lock will keep the gates locked together most of the time.
david
Reviewed in the United States on September 20, 2022
I bolt this gate lock & it was broken on arrival, was replaced. the next 1 went bad and found out only warranty 30 days.
greg Hartman
Reviewed in the United States on August 20, 2022
This lock is garbage they pull way too many amps. Will burn up your wiring
Customer
Reviewed in the United States on July 20, 2022
My wand failed after 1 mo in service. Started randomly opening the gates at odd hours then finally failed completely sending an open pulse about once per second. My gates are at a remote site and stayed open for several weeks. It probably reduced the life of my stepper motors since they kept trying to open every second or so.I cant find any contact info for customer service and no one answered my first "question" about a contact. I asked a second time. I was waiting on doing a poor review to give them time to do the right thing, but I'm not feeling the love right now.
Cholita
Reviewed in the United States on November 21, 2022
Easy to install, great price
Recommended Products

$399.95

$ 99 .00 $99.00

4.3
Select Option