Your cart is empty.
Your cart is empty.Product Description
Motorcycle License Plate Bracket / Motorcycle License Plate
Made from high quality aluminium alloy, durable black powder coating, clean underneath appearance, this durable fender eliminator has a stylish aesthetic, it's the best choice for bicycle number plate racks.
Fit for Ninja ZX-6R ZX6-R 636 2019-2025
product advantage:
MikeF33
Reviewed in the United States on March 2, 2025
The price is great and was able to put on motorcycle with no issues. Makes the tail end look on your motorcycle a lot better. Would recommend instructions online are clear.
Moni Johnson
Reviewed in the United States on February 19, 2025
Installs quickly and works perfectly on my 2025 ZX-6r. I definitely recommend this mod if you have the same model of bike
Ej
Reviewed in the United States on January 16, 2025
I purchased this fender eliminator for my 2025 Kawasaki ZX-6R. It came with hardware, instructions, and even a small file. The bracket is made of sturdy metal, but is lightweight compared to the whale tail. Overall quality is excellent for the price.The install took me about 1 hour which included removing the servo motor and filing down the bracket tabs. There are several DYI videos online that help if the written instructions are not complete.Save some money for other mods and purchase this tail tidy.
Alex
Reviewed in the United States on September 20, 2024
They give you exactly 4 screws, 4 nuts, 4 spacers and 8 washers. NOT A SINGLE SPARE, VERY CHEAP!!!I dropped 1 nut and 1 washer somewhere inside the bike when I was putting the tail tidy onto the bike. I ended up securing the tail tidy with only 3 screws.Edit:I have bought some m6 nuts and washers to complete the install
Luis Armando Barradas Belman
Reviewed in Mexico on July 6, 2024
Si queda bien pero tienes que hacer algunos ajustes y mejoras para que no entre el agua en temporada de lluvias, ya que queda un espacio considerable entre la base y el porta placa
Fab
Reviewed in Canada on May 16, 2024
Tel que décrit!
Matthew
Reviewed in the United States on October 9, 2024
Bought this hoping that it would fit my new 2024 zx6r as seeing some people say it doesn’t fit theirs but they must not know how to install one as it does fit. 😭 it was a bit hard as you may need 2 people just to hold it in place while putting it up on in there but I did it myself so it is possible. There’s a guy on yt who bought the exact same one for his and he can show you how to install it too. (If u wanna use factory lights on it though make sure to take out the plastic piece inside the light before attaching it or ur gonna be there for a good 20 min trying to put only one in)
Renegade
Reviewed in Australia on July 15, 2023
Excellent price, fit and finish. I like the way you can reuse the existing indicators and number plate light.Fitted a 2023 ZX-6R perfectly.Arrived super fast from the USA (one week), well boxed and packaged and inlcudes everything needed to install.- 1 x Fender eliminator bracket- 4 x M6 x 25mm Allen screws- 4 x M6 Lock Nuts- 8 x M6 washers- 4 x Aluminium spacers- 1 x rubber grommet- 4 x cable ties- 4 x lengths of heat shrink tubing- Metal file- Installation instructionsA few small notes on installation:You can use the included metal file to twist out the indicator tabs and file down the notches.Install the number plate light first, before the indicators. Use the included rubber grommet in the centre hole for the number plate light mount. Feed the number plate wire through the grommet first, before fitting the grommet into the hole. Reuse the existing 2 x grommets, screws and washers from the stock fender to fit the number plate light to the fender eliminator bracket.I opted to use a 22.5mm grommet in the square hole on top of the fender eliminator, where the wires feed through into the bike, for added protection of the wires and additional water proofing. I purchased this from Super Cheap Auto.Use the provided spacers. This allows enough clearance for the wires to not get squashed and allows the fender eliminator to sit flush.The indicator and number plate light wire plugs are all colour coded, so it's impossible to connect them incorrectly. Number plate light is white, left indicator is grey, right indicator is black.If you disconnect the exhaust servo plugs, there's two of them, DO NOT TURN ON THE IGNITION until they are reconnected. This will avoid getting an engine FI error code.It's a straightforward install, just take your time and use common sense.It looks great once fitted and is actually better in many ways to some of the American branded units that cost stupid money for such a simple contraption.
Merobbins67
Reviewed in the United States on May 8, 2022
This FE is perfect and awesome price. Added to my new 2022 ZX6R and used the existing blinkers. If you have after market (smaller) blinkers, this should also work as I had to break out the inserts for the OEM blinkers. (Easy). I may get smaller blinkers later but I’ll have to buy another one of these brackets. But at this price it’ll be worth it.On the 2022 Ninja, the servo motor is in the tail and it’s much easier to disconnect the 2 plugs for this install. Just make sure you disconnect the battery first so you don’t get any engine codes. Then make sure everything is plugged back in before re-connecting the battery.This looks sweet and took me about 2.5 hours. But I’m OCD so it can be done faster.This is well worth the purchase and a quality product. I’ll add pics in a bit. Gonna go ride first. 😎
Jeremy mckinney
Reviewed in the United States on February 3, 2022
Ok where to start. Fast shipping got product no instructions . Had to break side plates out .. spent 45 min putting it together.. The side markers work like a charm.. plate light no . The rubber garment does not fit .. had to use to other garments and washers for the side screws .. did not need the spacers not sure why they in there.. fits flush and sturdy.. good product but plz add instructions and more hardware that is needed ..
David Wehnert
Reviewed in the United States on November 10, 2022
This fit perfectly and did not require modification, besides me cutting the cutouts to use my original turn signals. It is such a great price for what you get. Just buy it. I know it doesn't provide the hidden plate lookup like most people like, but it works well for what it is. It keeps the plate readable, but gets rid of that ugly tail.
Recommended Products
$155.00
$ 71 .99 $71.99