Shopping Cart

Your cart is empty.

Your cart is empty.

XLTTYWL Starlink Ethernet Adapter Gen 3/Mini, Waterproof Extension Repair Coupler for Starlink Gen3 Standard SPX to RJ45 Compatible with Starlink V3/Mini Dishy (1 Pack)

Free shipping on orders over $29.99

$5.99

$ 2 .99 $2.99

In Stock

About this item

  • *Direct Ethernet Connection: The Starlink Gen 3 Ethernet Adapter enables a seamless connection from Starlink Gen3 and mini starlink to standard Ethernet cables. Gen 3 Starlink adapter eliminates the need for cutting or crimping original Starlink cables, ensuring a hassle-free setup.
  • *Durable and Advanced Design: Featuring patented advanced soldering-type RJ45 connectors, the Starlink MINI Ethernet adapter is engineered for all-weather, heavy-duty use. It reduces contact resistance by 50%, maintaining optimal performance for your Starlink Gen 3 (REV4) system.
  • *Extend and Repair Your Network: Easily connect the Starlink Gen 3 extension repair adapter to RJ45 Ethernet cables of your desired length. For best performance, use Ethernet cables under 175ft (50m) to minimize potential interference and signal loss.
  • *Robust Waterproof Protection: The Starlink RJ45 coupler includes an IP67 waterproof kit, providing superior protection against moisture, dirt, and environmental factors that could disrupt network performance in both indoor and outdoor settings.
  • *High-Speed Data Transmission: Made with 24AWG 100% pure copper, the male-to-female extender ensures strong signal and fast data transmission up to 1200Mbps. The full-metal shielding protective layer minimizes signal interference for reliable connectivity.
  • Note: For Ethernet cable couplers/extenders, use Cat6A or higher cables with 26AWG or better and high-quality RJ45 ends for a stable connection. Due to the unstable power of third-party PoE injectors, we recommend using regular Ethernet cables (23AWG or better) not exceeding 75ft in length. Also includes Starlink Enterprise components for enhanced connectivity options.



Product Description

0085

XLTTYWL Starlink Ethernet Adapter Gen 3/Mini, Waterproof Extension Repair Coupler for Starlink Gen3 Standard SPX to RJ45 Compatible with Starlink V3/Mini Dishy

*Durable and Advanced Design:

Featuring patented advanced soldering-type RJ45 connectors, the Starlink MINI Ethernet adapter is engineered for all-weather, heavy-duty use. It reduces contact resistance by 50%, maintaining optimal performance for your Starlink Gen 3 (REV4)/Mini system.

0085

kataflok
Reviewed in Canada on March 7, 2025
To put it simply, the biggest flaw with the entire StarLink system is its cables - this fixes that.Our StarLink lives on a mount on the roof of our house and goes with us on multiple trips per year in a magnetic vehicle mount. This requires me to frequently climb a ladder to try to jerk the cable out of the most fragile part of the system, often in very cold temperatures.The stock StarLink ethernet cable works great at 25 degrees above freezing, but is useless at 25 degrees below freezing and almost immediately broke.If I were to install a new StarLink today, the first thing I would do is cut off the end and use this ethernet adapter instead—even just for safety reasons. Even if StarLink someday manages to make a cable that will survive Canada's winters, it's still incredibly dangerous to have to jerk on a cable while 20 feet up a ladder.
Blog Mi Perro Mola
Reviewed in Spain on February 9, 2025
Ya sea que necesites reparar o alargar tu cable Ethernet para el Starlink, este kit es la opción perfecta.El apartado de estanqueidad (que es la razón por la que comprarías este kit) se cumple de sobra y ofrece protección ante las inclemencias del tiempo.Los materiales son de buena calidad y sobre todo resistentes, aunque no estaría de más que viniera con un par de juntas de repuesto para cuando el tiempo acabe por dañarlas y pierdan efectividad.No le doy 5 estrellas porque no trae ningún tipo de instrucciones, es cierto que la instalación es bastante sencilla una vez que sabes lo que tienes que hacer, pero no está de más un pequeño manual con pictogramas de la instalación paso a paso tal y como aparece en las fotografías que aporta el vendedor.Muy recomendable.
Customer
Reviewed in the United States on February 17, 2025
This does not fit the cable that comes factory with the Gen 3 dishy, at least not when using the waterproof casing (which is a must since it will be deployed outside in the weather). If not using the waterproof casing, the male end of the dishy's cable plugs directly into the female end of the adapter. But, when using the waterproof casing, the plastic ring does not fit over the existing rubber on the wire just before the RJ45 connector itself - which you can see in the middle of my picture. If you leave out the plastic ring, the rubber on the cable just before the RJ45 connector doesn't fit through the adapter's casing either since it's only as wide as the plastic ring. Both ends of my cable have the rubber before the connector which helps keep it waterproof and helps it fit snugly into the dishy and the router. But, there's no way to get the cable through the plastic ring or casing without shaving the rubber off of the cable, which I'm not willing to do.The left and middle connectors in my picture are the ends of my cable, so you can see there's rubber at both ends. The connector on the right is from this adapter, which you can see has the same rubber as the factory cable. I've had 2 cables for the Gen 3 dishy, and both have the waterproofing rubber just before the RJ45 connector.I'm giving this 2 stars because, despite it not working with the Gen 3 cable as advertised, the adapter itself does work. But, without the usage of the waterproof casing, there's nothing preventing rain from getting into the cable and adapter, and not much keeping the cable plugged into the adapter. If I could have gotten the waterproof casing and plastic ring to fit around the rubber on the cable, I would have given this 5 stars.
2-Step
Reviewed in the United States on January 18, 2025
This short extension cable does a good job where a short pigtail is needed.
IanGr
Reviewed in Australia on December 30, 2024
This weatherproof / IP68 network adapter for the Starlink Gen 3 or Mini is a handy replacement in case your original gets damaged by an animal or something. (There are two of these in the pack.)The quality is evident, and we can see how the weather protection of the connectors is achieved.If you have a Gen 2 Starlink dish this might not be the one to use. At least the compatibility diagram shows it is not for the older Starlink antennas.
The Smart Dog
Reviewed in the United Kingdom on December 10, 2024
This adapter is easy to install and feels well made.It’s waterproof, dust proof and I will be using it when we go away this summer in our mobile home to enhance our connection.It provides a reliable wired connection that’s consistently stable in a somewhat remote location.It is durable and appears well designed and I am happy to recommend it.I hope you find my review helpful.
Customer
Reviewed in the United Kingdom on November 25, 2024
The build quality is impressive. These adapters are designed to handle outdoor conditions, they’re waterproof and feel durable right out of the box. The installation is straightforward. It connects your standard SPX cable to an RJ45 Ethernet setup seamlessly. No fancy tools or advanced setup, just plug it in, and it's good to go. in terms of performance, the adapter offers a stable, fast wired connection, which is exactly what I need for gaming, streaming, or running smart home devices. I immediately noticed the difference compared to relying only on Starlink’s Wi-Fi.
Are
Reviewed in the United States on November 12, 2024
I ordered for our RV. Simple accessory; connectors works as expected. No complaints.
Recommended Products

$139.99

$ 67 .99 $67.99

4.6
Select Option