Your cart is empty.
Your cart is empty. Description
Contents of Kit
1.Remote Control Assy
2.Horn Connector
3.2 Keys
4.Lanyard
5.3 Pin Connector With Lock Wedge
6.Mounting Bolts and Spacer Kit
7.Installation Instruction
Remote Control Features
1.Trim and Tilt Switch
2.Remote Control Lever
3.Fast idle lever
4.Emergency Stop Switch
5.Adjusting Screw
6.Netural lock lever
7.Shift position label
8.Handle, shift and throttle
9.Warning horn included
10.Port or Starboard station mounting
11.3.2KG
-Note: Not compatible with Stern Drive applications
Application
This control box -surface or side mounted ignition switch, excluding adapter harness and control cable.
The suitable wired for this control box(exclude the adapter harnesses and control cables):
(1) 1996 and newer engine are suitable adapter harness modle:
0176339 12 Ft
0176340 15 Ft
0176341 20 Ft
0176342 28 Ft
(2) Adapter harness 0768411 includes trim and tilt adapter compatible with 1973-1995 engines
(3) Pre-1979 engines need to replace the control cable with the post-1979 control cable CC205XX
(4) Another option for adapter harness including interior trim is CDI part number, 423-6344 (engine side only). This is an 18 inch extension of the trim hook and harness. If you convert a pre-1995 motor, you may also need the male plug end ᦇ 514685 and wedge pin ᦇ 514682 to convert the female plug to the male plug
Lori Dunlap
Reviewed in the United States on June 25, 2024
Used a few times and then the wires caught fire
don p.
Reviewed in the United States on August 8, 2021
It did not come with wiring instructions. With older boats such as mine, 1989 evenrude. The colors of the wires are some what different and it was a guessing game to wire it. Nice product though. Just needs some wiring instructions!!
Customer
Reviewed in Canada on July 30, 2021
I bought this product for a boat I bought to repair and flip. I ended up putting it on my own boat. 1/2 the price of OEM with no loss of quality. Everything is there for hook up, but you have to by the cables and harness extensions separate depending on the length of your boat. It is literally plug and play with the factory harness.
Kyle S.
Reviewed in the United States on July 15, 2021
When the control box arrived, everything looked fine except for a crack in the wiring harness. I decided to just splice the wires because I was hoping to take my boat out in a few days. After hooking up the cables and testing the control box in the driveway with the motor running, I decided it was good to go.While out on the water a few days later everything seemed to be working except that it seemed like I wasn't able to get to full throttle on the motor. After adjusting the throttle cable as far as it could go, I still wasn't able to get the motor to go to full throttle, and it wouldn't even move the shift cable to put the motor in reverse. Every adjustment I made did nothing.That's when I knew that there was something wrong with the control box, so a few days later I uninstalled it from the boat to see if there was an adjustment I could make. After further inspection I noticed that not only were the arms that push or pull the cables not moving far enough to give the motor full throttle, but they were slipping when there was the slightest bit of resistance.Thinking again that maybe I could get this thing to work, I took off the back panel, and to my surprise the whole thing popped open and parts just fell right out. I couldn't get it back together, and even I could, I would never reinstall this thing on my boat.After all this messing around, I'm now past my return window and I'm not happy. This controller was only $100 less than a genuine BRP controller, and it's significantly worse in quality. Now I'm stuck with a pile of worthless parts.Do yourself a favor and buy the real BRP parts. This controller is a ripoff!!!
Joeydogday
Reviewed in the United States on June 30, 2021
My old one was warn to the point that it would not bring me back to idle. Easy to inslall and have the controls back to normal. 15 months later the throttle arm is loose and will not idle down motor. Going to contact seller and try to get resolved before getting a new one,
Dennis D Schafer
Reviewed in the United States on October 16, 2021
it does seem to work but like all plastic its loose, its floppy, not solidlike a metal one would be, used it only once!
Recommended Products
$261.93
$ 99 .00 $99.00
$198.58
$ 82 .99 $82.99