Your cart is empty.
Your cart is empty.Product Description
Easily Manage a Variety of Filaments
This sheet is suitable for printing a variety of filaments. It is recommended to use PLA, PETG, and TPU on the EP surface, while the EP surface can be used with almost all filament types, including PLA, PETG, TPU, ABS, ASA, and Nylon. One YOOPAI Build Plate fulfill all your daily printing needs.
Make Every First Layer Perfect
The new version YOOPAI double-sided build plate uses a more advanced spraying process than the previous generation. The coating is more uniform and has stronger adsorption force. No matter which side you use, you'll get a perfect first layer.
Unique Textures Make Your Creations Special
The diamond texture on the surface of EP can be replicated on the base of your creations. The texture of each area of the EP surface is randomly generated, meaning you get a unique model every time you print.
One-step Installation without Waiting Even 1 Minute
Just place the EP with either side facing up according to your needs and attach it to the Bambu Lab printer’s built-in magnetic hot bed to start printing. The whole process only takes 3 seconds to complete. Let YOOPAI build plate instantly improve your printing results.
aitor
Reviewed in Spain on March 9, 2025
Pésimo producto, es una chapa metálica con un vinilo de baja calidad pegado, 3 impresiones y se está levantando.No lo compréis!!!!
Bill Wentzel
Reviewed in the United States on February 4, 2025
Very sticky. Good value.
Erin
Reviewed in the United States on February 16, 2025
This plate works great! Adhesion is amazing and the fine texture looks awesome!
Chris Bennington
Reviewed in the United States on January 9, 2025
It works well with my p1s and I don’t have to put glue on this I haven’t had any issues with the layers sticking but I will tell you it doesn’t come off easily.
Jon
Reviewed in the United States on January 7, 2025
I print mainly PLA+ and PET-CF. With the Bambu Smooth PEI plate, I would have to use glue stic when printing with PET-CF, not for adhesion, but as a release agent. For those unfamiliar, PET-CF will weld itself to that smooth Bambu plate, so glue stick is a must... I have ruined one already.I have seen many plates advertised as "NO GLUE STICK REQUIRED", but only to address adhesion issues, none of them talk about the use or lack there of as a release agent.So I pulled the trigger and bought this $10 DOUBLE SIDED EPOXY RESIN build plate figuring it's only $10, what the heck.It's micro-textured, not exactly smooth, but the prints are smooth to the touch, and the slight texture hides the layer lines rather well, for a $10 plate.If left to cool to room temp, PLA+ self releases, and even if you don't wait, it's still super easy to pop off.And now it's my new go-to plate for PET-CF, because it requires no glue stick, the PET-CF pops right off with a flex of the plate, doesn't even really mark up the plate. I have used it for about 2 dozen prints or so, time will tell but it's looking like this is a super value.Buy one, it's worth it.
Voyn238
Reviewed in the United States on January 24, 2025
This plate has been working really well for me! I am not really a 3D printing "enthusiast" - I fly FPV drones and originally mainly intended to print TPU accessories for that. I was given an Ender 3 and eventually got some good results, but it was soooo slow. I saw somewhere that the Bambu A1 could deliver really high quality TPU prints very quickly, so I picked one up. The stock print bed didn't do great with TPU, so I tried a few other 3rd party beds. The TPU always seems to stick TOO well and was very hard to remove without damaging either the plate or the print. I also didn't like the "pebbled" effect from them. The Ender had a mirror print bed which gave a glassy smooth quality to the bottom of the prints. So far this plate has handled everything I've thrown at it, and everything releases very well, even TPU. The bottom of the prints have a nice matte finish instead of that pebbly look. TPU, PLA, and PETG have all given good results with this plate. And you can't beat the price! All the other plates I've seen were 2 to 3 times higher. I haven't seen any signs of wear on this one, but I'm planning to buy at least one or two spares, just in case.
Dave
Reviewed in the United States on January 20, 2025
I have tried multiple plates from multiple vendors and this is one of the better ones despite it being one of the least expensive. I use this plate for printing ABS and ASA on my P1S for overnight and all day prints. When I go to pull the plate out of the printer the prints will usually slide right off. I have had several extended prints with ABS support for the interface where I pull out the plate and the prime tower slid right the back of the plate and stayed standing on the magnetic bed like it was printed there. I did add glue to the plate to help with some nylon prints, but I will be ordering more of these plates for the P1S and for the A1.
luis B.
Reviewed in the United States on January 2, 2025
Initially, I fell in love with the Double-Sided Epoxy Resin Build Plate, I have a 3D printing business and they work great, prints stay in place I don't need any brim with them and once they cool down prints come right off but so it happens that one of the 4 that I bought had issues with printing, I couldn't find the right z offset for it and after some test I decided to measure the thickness and it was definitely thinner in some areas to the point that I couldn't get prints to finish a proper first layer. I guess they need to do a better job at quality control. if you dare to take a chance it might be a great product.
MACRI
Reviewed in Australia on June 19, 2024
Absolutely no issues using this plate or recommending it to others! I used it on my A1 and actually has better adhesion than the Bambu Lab plate in my case.As other comments said, it’s not a smooth finish. It’s a textured finish like the original plate included.
A Em
Reviewed in Canada on February 28, 2024
I'm pretty new to 3D printing and I really thought PEI was overhyped until I got this. I had been struggling with printing PETG on my spring steel sheet before (only 2 prints stuck out of 18) and decided to try this instead. IMMEDIATELY the print came out flawlessly on the textured PEI side, with no lifting when printing the first layer (where my spring steel would have some parts that dont adhere). Every print just sticks, PETG & PLA, and after cooling by 20C or to 30C you can hear the part peel off on its own.It seems to be a PEI sheet applied rather than spray coated but not 100% certain.The smooth PEY side however, I haven't been able to get PLA to stick (the parts that do does have the circular sparkles transfer though), haven't tried with PETG. Though I've never printed on smooth sheets so this might just be a tuning issue, can't give a definitive statement here. It's very soft though, getting dents from PLA flakes when it got squished between the heating bed, so you'll want to make sure its very clean each time you use it or flip the sheet to PEI side (the dents eventually went away after a day of leaving it sitting)It's also worth nothing the edges of the plate are somewhat sharp, so be careful when handling the sheet.But as far as the textured PEI side goes its perfect, and highly recommended
N.Koba
Reviewed in Japan on December 11, 2024
バンブーラボP1Sで使用。あまり期待せずに、比較的安いし、食いつく材料を使うときにノリで汚すとか、コーティングが剥がれちゃっても良いかなと思いながら評価用と割り切って購入しました。現時点でノリなどは使用せず、まだ10回程度の使用ですが、表面のPEIコーティングは純正とほぼ変わらないです。PEY(?)のキラキラしている方も今のところキレイに使えてます。板厚が薄いのか、材料のせいか曲がりやすいので、造形物は剥がしやすいです。思いのほか、すごく良かった！
Legorreitor
Reviewed in Mexico on November 30, 2024
Se adhiren también que cuesta trabajo quitarlas y pues me ocurrió una desgracia, como no pude quitar la pieza calenté otra vez la placa, pero aun así no la podía retirar, utilice la espátula pero aun así no cedía la pieza y cuando x fin se pudo la misma textura de la placa se pego con el pla y se despego una parte, no se que tanto afecte esto a las impresiones en 3d pero aun así es buena hay que tener cuidado en como despegar la pieza para que no te pase lo que a mi y que también es muy rígida la placa.
Kristopher J. Kemper
Reviewed in the United States on November 20, 2024
I don't know how long it lasts as I've only had it a week, but it is less textured then the bambu textured plate and things stick to it better. I have to cool the plate in the fridge on some prints to get it to release better. I've wondered if I should try cooler bed temperatures but I don't have any other issues so I just print with the bambu textured plate profile. I only paid $11 for this plate, so even if I find out the lifespan isn't as good as some plates, I don't really care. Glad that I could get a high performing plate that is less textured and so cheap. Side note, I've found PETG sticks and releases pretty similarly to PLA; not sure why some comments say PETG sticks more.
Recommended Products