Your cart is empty.
Your cart is empty.
Product description:
Installation location: vehicle relay box
Suitable for cars Damp proof and waterproof With 16AWG red insulated wire
Great for standard quick blow blade fuses (medium )
Access to the fuse is by means of a snap-fit lid on the top of the holder
Specification:
Type: fuse holder and fuse
Cable type: 16AWG
Max voltage: 32V . current: 10A
Operating temperature: 30°C~170°C
Temperature controlled range: 30°C~170°C
Rated current: 10A, 32V, DC
Implementation of standards: National Standard
Package Included:
1 X Fuse Holder
2X 10Amp Fuses
Customer
Reviewed in the United States on January 6, 2025
Buy without hesitation. Nice thick wires quality fuse holder. Excellent purchase
Dean Ketcherside
Reviewed in the United States on January 18, 2025
The mini fuse terminals are too narrow and require to be bent outward slightly to fit. In addition, in my application the mini fuse end was too thick, so I had to shave it down. The item worked but with a little repair.
Brian McKenzie
Reviewed in the United States on July 22, 2024
This fuse adapter works great for adapting between a mini fuse and a standard blade fuse. The only slight issue I had was getting the mini plug end to fit into my fuse panel. The blades were slightly off so it took a little finagling to get it to fit but it eventually did and works fine. The wire used is quality 16 gauge stranded wire.
Cliff Miller
Reviewed in the United States on February 17, 2024
Yes, I’m very happy. Thank you..
Pants Mcgee
Reviewed in Canada on September 15, 2023
The blades on the male end of the adapter are very thin and flexible.
Derek Presto
Reviewed in the United States on August 19, 2023
Used this to put a circuit that had a draw on a switch. Just cut the one side and wired both end to a toggle switch. Now the circuit is still fused and on a switch so I can kill the circuit when the car sits so it does not drain the battery. Cheaper and easier than fixing the issue which would cost more to repair than what the car is worth. Nice and low profile too so it fits with the fuse box cover on.
D. Hedderick
Reviewed in the United States on August 11, 2023
It does function as designed, but you have to modify it to make it fit. The pins are not the correct spacing.
Michael Scheper
Reviewed in the United States on August 1, 2023
The package actually includes only one adaptor, but two fuses. Also, the wires on the adaptor are insufficient: they're 16 AWG, thus rated for a maximum of 10 Amps. The connectors make good contact with the fuse and the fuse panel, and the cap on the fuse connector is a nice touch. But the 15, 20 and even 30A fuses I've seen supplied are dangerously overrated, and current of more than 10A passing through this product may cause a fire.
Alan Caracol
Reviewed in the United States on September 4, 2022
A must for every toolbox for troubleshooting. Easy enough to make your own but the price and one day prime delivery make it worth every penny.
Recommended Products
