Your cart is empty.
Your cart is empty.
The Quincy Lab 10-140 incubator is an analog, thermal convection incubator with temperature range from ambient + 2 to 62 degrees C, an internal capacity of 0.7 cubic feet, and a +/- 0.75 degree C stability at 37 degrees C. It comes with one fixed and one adjustable chrome-plated wire shelf for customization. The bimetal temperature controller has an analog temperature knob that adjusts the temperature. An illuminated power switch indicates when the unit is powered on and a heat-cycle light indicates when the heater is cycled on. It has a see-through tinted acrylic door for safety and temperature consistency. This incubator has an interior of aluminum and exterior of cold-rolled steel that is powder coated in ivory colored paint. This unit complies with Underwriters Laboratory for the United States (UL) and Canada (C/UL) standards. This incubator is designed for warming cultures, test kits, eggs, and other biological samples in clinical, industrial, and academic settings.
SpecificationsTemperature rangeAmbient + 2 to 62 degrees CCapacity0.7 cubic feetTemperature stability+/- 0.75 degrees C at 37 degrees CFootprint12 x 10 inches (W x D)Interior dimensions10 x 12 x 10 inches/25.4 x 30.5 x 25.4cm (H x W x D)Exterior dimension15 x 13 x 11 inches/38 x 33 x 27.9cm (H x W x D)Shipping weight25lbs./11.3kgPower supply115V AC, 120WCertificationsUL-listed; C/UL-listedH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Incubators maintain optimal conditions such as temperature and humidity in order to grow and maintain microbiological cultures or cell cultures. They are commonly used for experimental work in biology, microbiology, and molecular biology labs.
Quincy Lab, Inc. manufactures laboratory incubators and ovens. The company, established in 1973, is located in Chicago, IL.
What's in the Box?
- Quincy Lab 10-140 incubator
- (2) Shelves
- Spirit thermometer
- Instructions
Customer
Reviewed in the United States on April 22, 2024
This incubator works great. We use it to test our raw milk on-farm. Holds its temperature well. Customer service is friendly, helpful, and knowledgeable.
Vici Bissette
Reviewed in the United States on December 12, 2023
This product unfortunately did not meet the size needs it was purchased for. It was a great product and delivered timely. The customer service to return was very prompt.
Ariana Dental Lab. inc
Reviewed in the United States on June 28, 2020
This is excellent! It was shipped on time and well-packaged. Beautiful machine!
bty
Reviewed in Canada on February 22, 2020
La porte en plexiglas s'est mise à gondoler après 5 utilisations à 30 degrés
Customer
Reviewed in the United States on January 3, 2020
After calibrating the accompanying thermometer, and running the incubator for a week to find the best setting for the temperature I needed, the incubator has successfully held the correct temperature +/- 0.5 degrees C, ever since. It operates in a very stable environment, as well, I'm sure that helps. This is a terrific small incubator for the price.
Elaine Fresco
Reviewed in the United States on May 18, 2019
So far this incubator has worked well except for the thermometer, which is inserted into a cork which is supposed to fit into the hole at the top, except it doesn't fit. It appears that the outside metal of the box and the inside lining of the box do not quite align, which means the hole is too small for the rubber cork to fit. That means that heat can escape around the ill-fitting cork, which flops over to the side. Without the thermometer inserted correctly, it's hard to set the correct temperature.
The Mixologist
Reviewed in the United States on April 5, 2019
Has been on continuosly now for 2 weeks. Temperature has help perectly. If contiues to perform this way would buy again.
Rivian
Reviewed in the United States on October 24, 2018
I wanted an incubator for bacteria culture. This incubator is very compact. Comes with an extra shelve so you can have 2 levels. The unit looks and feel surprisingly sturdy. The door has magnetic latches. A thermometer is included. It's pretty simple to use. Just an on/off button, a temperature dial, and an indicator that light us when it's actively heating. It's kinda guess work at first to set the temperature. The dial is more a power dial than a temperature setting since the incubator temperature is dependent on the ambient temerature. But once you figure it out, it works well to maintaine the temperature. I use it in a room with fairly constant temperature and have not tested it in a room with significant temperature variation.
Rakesh Patel
Reviewed in the United States on October 17, 2014
Picture of incubator is for Model 12-140, however description is for Model 10-140.They pulled the bat-and-switch on me.Double check the Model number and the image to make sure you get what you want!
Recommended Products
$55.00
$ 25 .99 $25.99
$14.38
$ 7 .99 $7.99