Your cart is empty.
Your cart is empty.
(14mmx14mmx6mm) Heatsink Features：
- Material: Extruded Aluminum 6063-T5
- Coating: Anodized
- Dimension: 0.55 x 0.55 x 0.24 inch / 14mm x 14mm x 6mm
- Mounting Style: Panel mount / SMD / SMT
- Fin Style: Vertical
- Number of fins: 7x4
- Standard: RoHS compliance
Widely use
- for computer PC chipset, power IC, power electric device, LED light devices, Electronic Devices, Robotic Projects, LED Modules etc.
- for GPU IC Chips VRAM VGA RAM MOSFET
Jose Quavo
Reviewed in the United States on March 15, 2025
They're cute, they work just fine but I noticed specs of the finish were missing. Used on Mobo VRM.
PiArduinoUser
Reviewed in the United Kingdom on January 6, 2025
Bought to use on 2230 and 2242 nvme m.2 drives. Seem to stick easily and work well
Mark Webber
Reviewed in the United States on May 20, 2024
I have a 4-monitor dock that gets really hot to the touch so I bought a10-pack of these small aluminum heatsinks. I’m using six. They seem to work well as the dock stays noticeably cooler with them attached. It now gets warm instead of hot. While small, they seem effective in wicking heat away from the dock.
So Cal Buyer
Reviewed in the United States on March 27, 2024
These are handy heatsinks for small parts. I'm using it on a PCI Gen 4 NVME SSD that gets pretty hot when running. I peeled off the label (voiding my warranty probably, just be aware of that). Then, I put one of these on the controller and each of the flash memory parts.This keeps the SSD temperatures under control.I've had no problem whatsoever with how well the heat sinks stick - so be careful and make sure you position them correctly first because once they're stuck on, they're stuck on!
Glyn Storey
Reviewed in the United Kingdom on November 6, 2024
Used to provide a heatsink for 20mm LED COB modules on an aluminium substrate. They easily stick to the back of the LED top provide an effective heat sink.
Galen
Reviewed in the United States on November 3, 2024
i put one on controller the other on mem chip.lowered temps much. well below the 85c thermal limit.
Mofmof
Reviewed in Japan on October 20, 2024
USB-C～HDMIアダプターを使用していると本体部が結構発熱するので両面に貼ってみました。ヒートシンク全体が暖かくなるので熱は伝わり放熱されているものと思われます。接着力も結構強いです。
Charles R. MacCluer
Reviewed in the United States on April 25, 2024
I have a Russian dongle radio (Colibri Nano) that runs excessively hot. Five of these radiators have cooled it down to a life-extending temperature.
G703マウス
Reviewed in Japan on September 18, 2023
オンライン対戦でやたら熱くなるので装着しました。扇風機で風も送りながら、ヒートシンクで冷やしています。熱伝導率は良いと思われます。
Jean
Reviewed in the United States on October 14, 2023
Is great, make the work
XLEAGEN
Reviewed in the United States on January 24, 2023
VERY strong adhesive. I mounted them all on my onewheel GT rim and none have fallen off in over 200 miles of rough offroad terrain. They helped a tad bit with the cooling and I think they did fine.
J
Reviewed in the United States on May 5, 2022
I wanted to take the little noisy fan off my PiHole. This heatsink is kind of overkill (to overlaps the main chip by a bit) but it's working as intended. No heatsink, I was getting 48.7c and after installing the heat sink I was getting 35.5c
amason_fun
Reviewed in Japan on August 23, 2021
ステップダウンコンバーター、ステップアップコンバーターのＩＣに貼り付けたくて、小さいのを買いました。 大きさは手持ちのコンバーターのＩＣにはぴったりのサイズです。 放熱効果は使いこまないと評価できませんが、10ヶでテープ付きで700円を切る価格でしたから、効果が弱くても損した気にはなりません。
Recommended Products
$16.90
$ 6 .99 $6.99
$29.95
$ 14 .99 $14.99