Your cart is empty.
Your cart is empty. Instruction
Noted: This product only works in the dusk or evening when the ambient light is less than 20 LUX or no any light in the surrounding environment.
The product adopts good sensitivity detector, integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install.
Remote Control Wall SwitcH
Specification
Input Voltage: 110V/AC-240V/AC
Detection Range: 180°
Power Frequency: 50/60Hz
Time-Delay: Min.:10sec±3sec Max.:7min±2min
Working t emperature: -20~40°C
Rated Load: 1200W /220v(incandescent lamp) 300W/220V (energy-saving lamp) 800W/110V (incandescent lamp)
Power Consumption: 0.45W(work); 0.1W (static)
Detection Motion Speed: 0.6~1.5m/s
Size: 70mm*115mm*35mm
PIR Motion Sensor Switch
FUNCTION:
1.It can only work in the ambient light less than 20LUX (dark).
2.Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic (set time).
3.Time-delay adjustment: It can be set according to the consumer's desire. The minimum time is 10sec±3sec. The maximum is 7min±2min.
4.The switch: The switch is "ON","OFF","AUTO".
INSTALLATION:
1.Shut off the power.
2.Loosen the connection column on the bottom of sensor, plug the wire into connection hole, tighten the screws; unload the surface of sensor, connect the sensor into connection box.
3.Cross the installation screws into installation hole of sensor, aimed at the hole of 4.connection box, tighten the screws, cover the surface of sensor.
5.Switch on the power then test it.
CONNECT-WI
$40.06
$ 19 .99 $19.99