Your cart is empty.
Your cart is empty.15 inch Stainless Steel Extension Pole for Proxicast’s Pro-Grade adjustable stand-off antenna mounts. Pole is swaged at one end to allow insertion into either end of a curved J-Max J-Pole. Swaged end includes 2 attachment bolts and nylon lock nuts to create a secure connection to the J-pole. The J-Max's round and square hole pattern is replicated for use in either direction.
Use to extend the height of the antenna mast or to increase the wall stand-off distance prior to the bend.
Works with all size J-Max mounts in both aluminum and stainless steel.
Kit Includes:
- 15 Inch Stainless Straight Extension Pole (1.5 in. outer dia; 18 in. total length)
- 2x M6 Stainless Coupling Bolts
- 2x M6 Stainless Nylon Lock Nuts (use an M10 wrench)
Note:
Depending on placement of the extension, the maximum weight supported by the J-Max mount may be reduced.
some guy
Reviewed in the United States on January 5, 2025
I bought this to mount my weather station. It's ok, but you can probably find one cheaper that will work just as well. My main complaint is that it comes with metric hardware that's too loose. I replaced it with SAE hardware, which fits the holes better.
gchili
Reviewed in the United States on January 30, 2025
Wonderful Steel Antenna Mount. A Well-made, solid piece of equipment. I think this may be the best one out there compared to others. EASY to put together and It WILL last for years to come.I highly recommend this unit above the rest. VERY happy with this.In retrospect after install, it may be over-kill for my weather station, but I can rest assured this will not break, bend, or even go out of adjustment for years to come.WORTH THE MONEY but then you get what you pay for with this one!
NP
Reviewed in the United States on January 21, 2025
Used to mount a weather station on the house.Mounting bracket was very strong and sturdy with mounting hole options. Pole is very strong and a perfect length and angle. Instructions for installation were good. Well packaged on arrival. Came with wood mounting bolts. Had to buy brick anchors for my situation. Highly pleased with product.
Suzanne
Reviewed in the United States on January 19, 2025
❤️ We mounted security system on them. it’s sturdy. It doesn’t wiggle when the wind blows. I can only say good stuff about this item. I love it.. I would buy it again ,,, oh I did buy it again because we bought several of them. I would recommend them to anyone. Thank you, Mr. Amazon for offering this product on your website.
Dennis Essig
Reviewed in the United States on September 4, 2024
I used this to mount a Ambient Weather station on the facia at the peak end of my roof.Using the provided holes I was able to get a solid mounting. I wasn't able to utilize the sloted holes for pluming the mast left or right due to there not being any good support at the center, but this was my builders fault. The other direction was easy to make ajustments and get plumb.I did chose to purchase stainless steel lag bolts as the provided bolts stuck to a magnet and appeared to be plated. My wife wasn't strongly in favor of the weather station and I didn't want to risk going to the doghouse because of a couple rust treaks in a few years. ;^)To get ideal wind information one should get height extensions that likely would require additional support, but in my case wind was only a minor consideration.Great product and stainless steel too.
Marcelo
Reviewed in Mexico on July 2, 2024
En mi caso tenía una pedestal en donde tenía instalada una antena UBITIQUI y la usé para aquí sujetar mi antena Starlink a través de este adaptador y ha funcionado correctamente , ya tengo más de 6 meses desde que lo instale y no he tenido problema alguno, incluso con las tormentas que ha habido últimamente.
fezzik
Reviewed in the United States on May 28, 2024
I have a new gen3 starlink dish. Its well known that up until May2024 that the starlink pipe adaptor is garbage. So I needed to improvise. Proxicast has been wildly popular with early generation starlink dishes. I have one of the OAM starlink wall mounts, but the extension pipe is MUCH MUCH to short. The advantage of the OAM wall mount is a very firm connection to the dish itself. So comes in the improvise. Use the proxicast J mount to provide the extension. a standard well made u-bolt pipe adaptor clamp, and the OAM stalink pole/mount. As show in one photo is all three together.install on a facia of a steep metal roof comes next week.Pros:- high quality material- all nuts and bolts included- clear install instructions- pipe diameter is perfect fit (with a couple wraps of duct tape to fit snug) with starlink pole mountCons:- with this kit, none- with proxicast in general, I wish they had a gen3 starlink pipe adaptor
tex
Reviewed in the United Kingdom on April 30, 2024
Shipped all the way from USA to UK but was worth it! The dish easily locks into place and is solidly built, fantastic!
DiegoDuque
Reviewed in Mexico on April 24, 2024
Muy bien excelente muy rápido internet 300 mgas
TimW
Reviewed in Canada on September 24, 2023
I used this to mount my Starlink to the top of my house. The tube fits the mountain pole perfectly! Needed to drill a hole and file it down some to fit the square locking button on the dish, but that was pretty simple to do. Looks amazing on the house and is very sturdy. Highly recommended!
drbob88
Reviewed in the United States on January 10, 2023
I ordered this antenna mount to install an outdoor PoE mesh network access point for my Starlink service. I was looking for a sturdy mount that would hold to the weather. The Proxicast Pro-Grade J-Max 100% Solid Stainless Steel Antenna Mount more than filled the task. I chose the stainless steel mount over the aluminum since it was only a few dollars more. Also, I wanted to increase the height of the mast by adding additional tubing, so the stainless steel should be able to carry any extra weight easily.The mount was straightforward to install. After installing the base support to the wall, there are only 4 bolts to insert and tighten. However, a couple of the base's mounting holes are directly behind the J arm. If you want to use these, you may have to assemble the unit in place rather than on the ground. The two small bolts holding the arm have to be slid in from the inside to the J arm tube. It was tricky holding the bolt inside the tube to line it up with the provided hole while standing on a ladder.I have vinyl siding, so I wanted to use the facia board on the soffit. The base support is a bit large (over 7 inches) and my facia boards are not that wide. I wound up using a front corner that gave me more surface area. Since I wanted to add to the mast height by a few feet, I used 1-inch PVC schedule 40 pipe. That size was almost perfect and slid fairly snuggly into the Proxicast J arm. I inserted the PVC pipe to the bend in the J-arm and added a few feet of length. I used 2 additional 1/4-inch bolts to secure the pipe. All in all, a very solid installation.
james
Reviewed in Canada on April 15, 2023
Really nice quality and light weight. Mounting screws and bolts were good quality.
Recommended Products
