Your cart is empty.
Your cart is empty.
Carb Carburetor Rebuild Kit for many Mercury Mariner Outboards 6, 8, 9.9, 10, 15, 20 & 25 HP models with a primer pump.
Cross Reference:
Mercury 1395-811357, 1395-9179, 1395-9377, 1395-9645, 1395-9725, 1395-9761, 1395-97611, 1395-9803
GLM 40610
Mallory 9-37304
THAT USE ONE OF THE PART NUMBERS ABOVE ONLY!
Package Includes:
1*Mercury Mariner Carb Carburetor Rebuild Kit
NOTE:
Please match the part number with part number on the old part to ensure fitment before purchasing. Easy to install and reliable to use, professional installation is recommended.
Randy Hopperstad
Reviewed in the United States on June 27, 2024
Great kit all correct gaskets and parts
Michael DeLong
Reviewed in the United States on September 14, 2023
Installed three months ago and the gasket to the float bowl was just falling apart.
JohnnyP
Reviewed in the United States on June 8, 2023
Came with pretty much everything you need. BUT, the bowl gasket is rubber and basically a one time use and I ended up needing to pull it back apart so I reused the gasket that was originally on there. The washer under the accelerator pump is a little larger ID than the plug and you need to be a little careful and kind of center it as you tighten.
Gary C
Reviewed in Canada on June 2, 2023
Had to remove float bowl and found the new gasket swollen so badly I can’t use it again. Poor quality material.
Vito
Reviewed in the United States on June 19, 2023
Seems ok
Daniel
Reviewed in Canada on February 23, 2023
Un des kit faisait sur mon 25 forceSuper
Gail C.
Reviewed in the United States on September 3, 2022
Very thin rubber material, not fiber like original. Top gasket blew a hole through in the 5 minutes I tried to get the engine running, never did run right. took the carb back apart and that's what I found. Bowl gasket was swelled up and deformed also. Doesn't seem compatible with fuel. Accel plunger parts seem OK. Flange gaskets are fiber.
Philippe G.
Reviewed in Canada on June 4, 2022
I ordered the kit for my mercury 15 hp and all the gasket fit well except the small one under float bol was not sealing well . The size was ok but even after tightening more it was leaking.....not sure but for now engine works fine.
Kwynn164
Reviewed in the United States on June 27, 2022
The actual gasket material was fine the rubber gaskets swelled up and cracked which now leak. Save your money and buy better.
Happy Boater
Reviewed in Canada on October 7, 2022
Had this kit installed in my 25hp Mercury. Worked fine for a few hours then motor worked worse and worse. Examination revealed gaskets disintegrated and pieces were all through the carb. Would have saved myself $500 and a lot of grief if I had stuck with Mercury.
Patrick Wessels
Reviewed in Canada on February 14, 2021
Not bad quality!Remember these kits do not come with instructions and they are universal. If your not a trained mechanic you may not have good results.It's a good kit. Quality is not so bad, it does come with some needed or un needed fuel pump parts and gaskets depending in your model. This is the part that will screw up novice mechanics so if your not sure the it to someone who knowsBuy it. It's a good carb kit for your 2 stroke mercs :)
Caleb
Reviewed in the United States on October 1, 2021
Replaced the gaskets on my 2 stroke 9.9hp mercury. The thing ran great for about an hour. Then the trouble started right back up. The rubber used is poor and too flexible meaning once things got warmed up the rubber no longer sealed and some gasketed even unseated.
chris
Reviewed in the United States on April 27, 2021
Absolute garbage, seals are cheap rubber. Do yourself a favor and buy the OEM carb rebuild from Quicksilver.Had this installed for a week and then noticed fuel leaking into my throttle Body… dismantled the whole unit and this is what I find. All the rubber seals did not hold up well..I ended up reusing the original gasket that’s in the picture on the right side of the rubber gasket that came with the kit.
Recommended Products