Your cart is empty.
Your cart is empty.
Specification:
- Name: Microcomputer Temperature Controller
- Model: STC-1000
- Temperature Measurement Range: -50 to 99 degree centigrade
- Temperature Control Range: -50 to 110 degree centigrade
- Measurement Accuracy: +/- 0.2 ℃
- Resolution: 0.1℃
- Accuracy: +/1%(-50 ℃-70 ℃)
- Control Accuracy: +/- 0.1 degree centigrade
- Sensor: NTC 10K L = 1M waterproof probe
- Power consumption:
- Power supply: AC/DC 12V
- Relay contact capacity: Cool(10A/220VAC), heat(10A/220VAC)
- Ambient temperature: 0℃- 60℃
- Storage temperature: -30℃-75℃
- Relative humidity: 20-84%
- Mounting size: 71mm x 29mm
- Size: 75mm/2.95’’x34.5mm/1.35’’x85mm/3.3’’
- Front Panel Size: 75x34.5mm
- Sensor length: 1m(include the probe)
- Weight: 16g
Package: 2pcs.
SENDEL
Reviewed in the United States on February 21, 2025
Buyers beware. I rated these with one star because zero star is not available. The controllers are electrically unsafe. The sensor wire of these temperature controllers is not insulated from the AC power line, therefore, this can be hazardous if the temperature sensor is immersed in a liquid. Electrical wires sometimes have pinholes, and that would be sufficient to "electrify" water, if the sensor is immersed in it. I have used STC-1000 controllers before, and the sensors did not have the power line as a common wire. These models rated 110V-220V are a redesign of the original STC-1000 rated just for 120V, and in order to reduce cost, the new design eliminated the isolation transformer and many other parts that made the controller safe. Luckily I inspected the controllers before I put them to use, and returned them to Amazon.
Seawitch
Reviewed in the United States on February 20, 2025
Trash, you get what you pay for. I bought these to backup an Inkbird for a greenhouse that I've used for years, and it finally gave up during a freeze here in TX. First one fell apart during the wire installation, the second one stopped working in the middle of the night and I lost plants because the temps got below freezing.
Jim Wood
Reviewed in the United States on January 4, 2025
The media could not be loaded.
Reysond
Reviewed in the United States on September 3, 2024
I have it for a while now. works great. have the 24v model. the coil is 24V DC but can use to connect 120v AC loads.
Rym Wirawan
Reviewed in the United States on July 24, 2024
Excellent
K. Wolter
Reviewed in the United States on December 18, 2024
I like these temperature controllers and have used a few in the past for various repairs and projects. When I was attaching the power wires to one I just got, the power terminals twisted off of the printed circuit board in the unit with minimal torque as I was tightening the screws to secure the wires. After taking it apart I was able to make repairs, but not everyone is experienced in doing this sort of thing. Five stars for how it works, zero stars for durability. While I had it open, I glued the remaining terminals to the PC board with cyanoacrylate to prevent this form happening again.
LTA Pilot
Reviewed in the United States on November 6, 2024
These work as advertised. Be aware that they're Celsius only - you can't switch to Fahrenheit. The user interface is a bit complex for something with such a basic function, though - every time I change the temperature, I have to pull up the manual to remember how to do it, and it takes both of my hands to do it easily. On the other hand, I don't have to do that often, and they do keep the temperature between power cycles.
One time customer
Reviewed in the United States on December 1, 2022
This is a VERY compact and easy to use temp/cool controller. Only downside is that it's CENTIGRADE ONLY. Harrumph!!! Here's a schematic on wiring it, a diagram about the operation, and a helpful text for programming it and FOLLOW them carefully. I found most of this online by searching STC-1000.
Recommended Products