Your cart is empty.
Your cart is empty.Product Description
About AUTEX
AUTEX is one of the largest AUTOMOTIVE SENSORS manufacturer in the auto parts aftermarket.
AUTEX can offer an extensive line of High-quality ready to install kinds of AUTOMOTIVE SENSORS.
AUTEX will continue to research and discover, manufacturing, supply and distribution of our products that ultimately delivers value to customers and society.
Fitment
Pressure Range: 0-200 psi
Material :Stainless steel
Output: 0.5V - 4.5V linear voltage output. 0 psi outputs 0.5V, 100 psi outputs 2.5V, 200 psi outputs 4.5V
Working Temperature: -40—+125ºC;.
Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
Accuracy: ±1%FS;
Thread: 1/8''-27 NPT.
Overload Capacity: 2 times;
Pressure Medium: The gas and liquid which is compatible with 316L stainless steel;
Load Resistance: ≤(supply power-6.5V/0.02A)Ω¸;
Long-term stability: ± 0.2%FS/year;
Temperature Effect on Zero: Typical: ±0.02%FS/ºC; Maximum: ±0.05%FS/ºC;
Temperature Effect on Sensitivity: Typical: ±0.02%FS/ºC; Maximum: ±0.05%FS/ºC;
Shock Resistance: 100g;
Anti-Shock: ≤±0.01%FS(X,Y,Z axes, 200Hz/g);
Response Time: ≤1ms;
Insulation Resistance: >100mΩ¸ 500VDC;
Explosion-proof Class: ExiaTTCT6;
Electromagnetism Compatibility: EN50081-1; EN50082-2; IEC61000-4-3;
Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
Wiring: Red for Output. Black for Vdd. Green for GND.
It is an advance pressure sender than traditional mechanical pressure sender.
Package include:
1 pcs x200 psi pressure transducer
How to replace with new automotive sensor?
Kindly note that:
Like anything else, sensors wear out, corrode, or become dirty. This essentially blinds the computer and triggers the terrible check engine light. You can purchase or prepare a code reader and read your OBD codes, that will help you a lot on installation.
Either way, you should always consult a repair manual before attempting any procedure involving automotive sensors. If you’re servicing a vehicle built before 1996, you'll need a code reader that reads OBD I information. Post 1996, you'll need a code reader capable of OBD II diagnostics.
1) Always wear eye protection and start with installation tools.
2) Searching related installation video on the internet will be recommended.
AUTEX's AUTOMOTIVE SENSORS
- Not remanufactured or rebuilt.
- High Quality Replacement Part.
- Exact Fit for easy installation.
- 100% Brand New and tested prior to leaving the factory.
- High Quality requestment
- High Output
- Exact Fit
After Replaced with AUTEX:
- AUTOMOTIVE SENSORS working more stable when you driving.
- Enjoying!
miguel
Reviewed in the United States on March 2, 2024
I HAVE A MAZDA ROTARY ENGINE COMPRESSOR TESTER THAT THE SENSOR STOP WORKING BECAUSE I DROP IT SO I ORDER THIS 200 PSI SENSOR AND IT STARTED WORKING AGAIN. THANKS AMAZON.
DLT
Reviewed in the United States on November 4, 2024
worked as described
Tad
Reviewed in the United States on January 30, 2022
Accuracy is 90%5% the rice of a Holley sensor
Michael V Cutter
Reviewed in the United States on July 9, 2020
I am using this to build a water well level monitor. I have this connected to pex in a T configuration with this on one end and an analog pressure gauge on the other side. This sensor is wired to an Arduino Nano clone and I'm able to get consistent reading that match the analog gauge.
Daniel R.
Reviewed in the United States on June 28, 2020
as soon as it was connected to my airlift management , in order to read my tank psi it was stuck on 70 psi even if the tank was on 0 or 200 psi , even after the compressors filled up the tank the sensor still read “70 psi” .It was broken from the factory and it did not do its job , would NOT RECOMMEND
Jay R.
Reviewed in the United States on March 8, 2020
I bought 2 for use with a plc to monitor water pressure. New, they were showing 10psi different, both reading 0psi. 1 lasted 1 month at 0-60 psi. The other that runs at 0-150psi is currently still working. When it failed it started outputting erratic voltage. These don't seem to have a good failure mode.Don't use these for anything critical.
Customer
Reviewed in the United States on August 3, 2019
Good product
whocares
Reviewed in the United States on May 19, 2015
The pigtail isn't long enough for much. I will need to re-terminate this connector with a sufficiently long cable. Other than that, it is a nice unit visually.1) The wiring is NOT watertight, although the connector is. The pigtail diameter is smaller than the connector backshell. I'll have to add heatshrink with adhesive to seal it or re-crimp sockets on the cable I need to use.2) It would be nice if this was offered as a kit, where I could just put whatever cable I need on it.
Recommended Products
$232.99
$ 99 .00 $99.00
$19.99
$ 8 .99 $8.99