Your cart is empty.
Your cart is empty.Product Description
Solid Aluminum base
Die-casting aluminum brackets add to extra load capacity and durable, better than most in the market.
Black Matte Powder Coated
Black Matte Powder Coated aluminum body offers non-corrosion for entire life time.
Adjustable
The roof rack length can be adjusted to better fit your car.
Less Wind Noise Design
The aerodynamic design effectively reduces wind resistance and noise.
dave zodrow
Reviewed in the United States on January 31, 2025
Perfect fit easy to install, the only thing I needed was longer bolts. Easy fix and they look great!
Peter Engelbert
Reviewed in Canada on January 26, 2025
These did not fit the roof rails on my 2021 Badlands
Lowell Parker
Reviewed in the United States on May 2, 2024
I had read several reviews where people stated that the bolts that clamp the crossbars to the rails are not long enough. It's true that you can't just loosen them like an open jaw and slip it around the rails. BUT if you loosen them all the way, You can fit the bottom bracket up into the rail slot and then re-thread the bolt that comes with it. There's plenty of thread to secure the crossbars to the rail if you do it this way. Yes, it's a bit tricky to re-thread them, because the bolts have plenty of wiggle room, but by inserting them as straight as possible while holding the bottom of the clamp in place, it works.One really nice surprise is that the clamps are solid metal. In the photos, it looks like the clamps (the "riser" part) are plastic. Nope, they're metal. Once in place, they seem very sturdy. I was originally not liking how much higher than the rails they stick up, but once on there, they look pretty good.Anyway, I hope this help you get them mounted.
Pjmichaud
Reviewed in the United States on March 31, 2024
Fit well, easy install but I had to but longer bolts for the brackets.
F P Gold
Reviewed in Canada on December 23, 2024
à Propos des quatre boulons qui vont sur le dessus des barres pour retenir les attachesNous avons perdu une heure à essayer de poser la première attaches parce que ce boulons est nettement trop court. Une fois changé ces quatre boulons pour quatre plus longs, toute l'installation s'est faite en vingt minutes. S V P, pensez donc qu'au moment du montage toutes les pièces ne sont pas déjà serrées. Que vous coûterais quatrre boulons plus longs d'un pouce ?
Frank
Reviewed in Canada on November 21, 2024
These crossbars are exactly the same quality as OEM at a mere fraction of the cost. Also excellent customer service.
Mr. Mac
Reviewed in the United States on October 24, 2024
Everything was pretty easy to install and took about 20 minutes to complete. It seems relatively high quality for the money I paid for the roof rack cross bars. They are very sturdy and lock into holes already on the Bronco rails. Next, I will install a kayak mount.
Isaac
Reviewed in the United States on January 12, 2024
I have just installed this item, so I cannot yet provide a long term review. I want to say that the bars appear to be high quality so far and were a perfect fit and finish match for my '21 Bronco Sport. The instructions could have been a bit more detailed, but I figured it out without need to watch 10,000 YouTube videos, so that's ok. While I'm glad they included label stickers for the left and right attachments, I wish they had used a sticker that was easier and cleaner to remove. It's annoying to have to get the GoofOff just for that. But so far so good.
Client d'
Reviewed in Canada on February 20, 2023
The screws that fix the tab on car rail are to short? Real sad about that.
YOUGHGIRL
Reviewed in the United States on December 4, 2023
Bought these for 2023 Bronco Sport Big Bend at one third the cost of Ford. To make install easier....put them together but leave passenger side loose and tighten after aligning on existing rails on vehicle....remove bolt for clamp and position these on existing rails using step ladder...once on and clamp aligned with rectangular slot underside of existing rail, push clamp up into slot and look down at hole (from on step ladder) in new ones to thread bolt you previously removed and tighten to bring clamp all the way up. Sounds complicated but it isn't. I'm an idiot handyman and only took half an hour after figuring it out. The supplied bolts aren't too short you just need to do it the right way.
seahawker
Reviewed in the United States on November 12, 2023
Got these cross racks because of the 265lbs rating. Assembly of the racks themselves was very easy. However after the instructions say to loosen the bottom screw you can throw the instructions away. You will have to remove the bottom screw to get the clamp under the roof rack. Then to find the notch under the roof rack I had to use my finger to locate the notch. I used a piece of tape to mark where the notch was so it's easier to align the cross rack. Once aligned I had to use my finger to push up on the clamp so the screw would reach the clamp. Whole process took under 30 minutes. They look great! At half the cost of Ford's cross racks it's a great deal! Highly recommend these racks!
Cbbkk
Reviewed in the United States on April 6, 2023
I initially didn't like this item because I didn't care for the high profile, but after seeing the reviews on the quality I decided to try it. These crossbars are really sturdy. All metal, no plastic. The mounts are metal, unlike some of the others I looked at. The clips that go under the side rails are also quite hefty, and coated with rubber to protect the finish. The color and texture of these match the factory side rails. I have to agree with another that said these are probably the same ones as the factory, without the high cost (about 1/3 the cost of Fords). Yes, they were a bit more testing to install, but once on, they are sound. Regardless of what the instructions say, you must remove the top bolt so the bottom clips will clear the side rails. Then lining the holes up for the bolt is where it is a bit frustrating. One thing I found very helpful is I put a hex bit in a ratcheting screwdriver for the top bolts rather than fumbling around with the provided allen wrench. First time I wrote a review, but I was impressed with this product. The only reason I gave it a less than full five stars was the difficulty installing, but then that may be unavoidable because of its sturdy design.
Recommended Products