Shopping Cart

Your cart is empty.

Your cart is empty.

2pcs Bottom Cover Rubber Non-Slip Bumper Foot Feet Pad Strip Replacement for HP Spectre x360 13-AE Series 13-AE012DX,L05405-001 942847-001 Laptop Rubber Foot Strip Silver (2pcs)

Free shipping on orders over $29.99

$8.88

$ 3 .99 $3.99

In Stock

About this item

  • 2PCS Laptop Rubber Foot Strip Replacment for HP Spectre x360 13-AE Laptop Bottom case Rubber Foot Strip L05405-001 942847-001
  • for HP Spectre x360 13-AE Series 13-AE0XX 13-AE010CA 13-AE020CA 13-AE030CA 13-AE015CA 13-AE088CA 13-AE011DX 13-AE012DX 13-AE014DX 13-AE051NR 13-AE052NR(Please check the size of the item carefully before purchasing)
  • 【 Product size 】Length: 244 cm ,Width: 0.53 cm (with the 3M backing, 0.5 cm without),Thickness:0.12 cm(Please check the size of the item carefully before purchasing)
  • Easy to use: There is adhesive on one side of the rubber strip,The adhesive on the Bumper Feet Strips of the release liner ensures that they are firmly attached to the bottom base of the laptop.Very strong viscosity,The effect is very good!
  • Please carefully measure your computer feet and our description of the product size is the same, length and width of the same words and then buy, otherwise buy back does not meet your needs!



Laptops Bottom Case Cover Rear Rubber Foot Strip Compatible With HP Spectre X360 13-AE Rubber Bottom Feet Strips L05405-001 942847-001
P/N:L05405-001 942847-001
for HP Spectre x360 13-AE Series
Spectre 13-AE0XX
Spectre 13-AE010CA
Spectre 13-AE011DX
Spectre 13-AE012DX
Spectre 13-AE014DX
Spectre 13-AE020CA
Spectre 13-AE030CA
Spectre 13-AE051NR
Spectre 13-AE052NR
Spectre 13-AE015CA
Spectre 13-AE088CA
Laptop Rubber Feet Strips Replacement Tutorial
1. Choose a suitable Rubber Feet Strips Rubber foot pads are more durable and have a longer lifespan. Long service life, not easily detached
2.Remove the old foot Pads Before disassembling the old foot Pads, some tools need to be prepared. You can use a pointed knife or a thin pair of pliers to slowly pry off the old Rubber Feet Strips. Be careful not to forcefully pry open with hard objects to avoid damaging the body. At the same time, it is necessary to clean the back of the machine to ensure that the new foot pads are tightly attached to the bottom 
3.Repalacement new rubber feet strips. Prepare a new laptop Rubber Feet Strips, place it in the same position as the old one, and then slowly press it down. During the installation process, it is necessary to carefully observe the adhesion performance of each foot pad to ensure that it can be firmly adhered at every position. After installation, you can check if the new foot mat matches the body completely. 
Matters needing attention
1.When disassembling and installing, pay attention to gentle handling to avoid damaging the position of the body and screws.
2. Check the model of your laptop to avoid purchasing the wrong Rubber Feet Strips.
3. After installing the new foot mat, clean the machine to ensure better adhesion of the new Rubber Feet Strips.


Dank4
Reviewed in the United States on March 24, 2025
Product was exact fit for my HP Spectre. Easy to install and works great.
Allan Woodworth II
Reviewed in the United States on January 28, 2025
On one of the two pieces, the glue came off with the paper on the back making it unusable.
Alex Vega
Reviewed in the United States on September 2, 2024
Fits perfect on my HP spectre x360, I recommend them :3
Fichy
Reviewed in the United States on June 24, 2024
Changed my battery and then these things kind of flopped around. Then I found these. I can’t believe how perfect they are. They should include a set of these when you buy a replacement battery for your laptop.
kflaming
Reviewed in the United States on December 23, 2024
HSSDTECH 2pcs Bottom Cover Rubber Non-Slip Bumper Foot Feet Pad Strip Replacement for HP Spectre x360 is not as shown or specified but I needed to use it anyway. Specified product Length: 24.8 cm Width: 0.6 cm Thickness: 0.2 cm. Spectre x360 13-AE013DX foot pad tray is 24.8 cm in length and 0.63 cm wide but product is actually only 244 cm long and 0.53 cm wide, with the 3M backing, 0.5 cm without. This leaves a 2mm gap each end and 1mm along each side! Also, the product is actually only 0.12 cm thick. Product seems pretty flimsy. Hope it stays put!
elaY
Reviewed in the United States on November 2, 2024
It’s not quite OEM, but it’s a serviceable, inexpensive replacement for the ‘feet’ on my HP Envy laptop. I replaced the battery and one of the original strips disintegrated upon removal (access to the screws to open the case are under the strips). They lack the smooth beveled edges of the OEM and the color is off, but they serve the need well and keep the machine planted when on a flat surface. The adhesive seems strong enough. 4.5 starsA photo is attached. The light grey bit under my thumb is the product in this description. The darker OEM strip (on a rose gold case) that survived the new battery install is in place, above.
Derek S.
Reviewed in the United States on April 23, 2024
I just installed them. Feel, look, and fit are good. Straight, not beveled, cut ends but no matter. Uses a 3M labeled peel and stick adhesive which gives me hope they won't peel off easily. Rubber doesn't seem quite as nice as original which feels more like silicone rubber, but these cost a fraction of the price. I'll update the review if my opinion changes over time, but I don't expect that. I'm very happy that I could order these on a Sunday and have them the next day.
Recommended Products