Your cart is empty.
Your cart is empty.Multi-Purpose Panel Adhesive is a two component epoxy for panel bonding of steel, aluminum, SMC and fiberglass.
Robert D.
Reviewed in the United States on July 3, 2024
Great stuff. A bit exspensive
J Burton
Reviewed in the United States on March 21, 2024
Worked great
Robert Smith
Reviewed in the United States on February 6, 2024
Glue new steel panels to repair rusted floor pans in 1952 pickup.
Robyn Baquet
Reviewed in the United States on December 4, 2023
Just as good as the 3M brand but less expensive. Tired the cheaper ones but too thin. Best value for the price!
Ally
Reviewed in the United States on October 27, 2023
This is my favorite panel bond adhesive. Its nice and thick, sticks amazing and works perfectly every time. The 3M is as good but even more expensive of course, other cheaper brands have been too thin for my liking. You don't want this stuff dripping, running all over the place, its a pain to clean up and looks highly unprofessional.
usersony
Reviewed in the United States on June 16, 2021
I have a '98 Honda Civic 2 coupe, that I like to take care of. My driver's side power window start coming of the rails and going up and down at weird angles, so I decided to get in there and see what's wrong, eventually ended with replacing the window regulator.Now it was time to re-install the door panel but I couldn't get it on properly and a bit too much force cause the plastic at the top end to crack and crunch. Ugh... Read online someone had slathered this SEM Multi Purpose Panel adhesive onto their broken door panels and had a great success.I don't have the mixing gun for these products so I pushed the product out the container by whatever means I could. I mixed it and made a thin layer to cover one half of the plastic. On the second side I used a lot of adhesive. The side with more adhesive definitely came out stronger and stiffer. Either way, very happy with the results. It is worth the money.
JAMES
Reviewed in the United States on May 23, 2021
The adhesive was very strong. But it was runny so when trying to put under panel it, would drip off so was not as much build up as I wanted.
Composites shop
Reviewed in the United States on June 20, 2020
This stuff is great to use for composites. The glass microspheres keep adhesive from squishing out. We use it to bond wood to carbon fiber.Tip- if you have leftover just let it harden in the mixing nozzle. When you need it again just swap a new nozzle on and prime like normal. This is the mfg recommended method.Tip- the nozzle tip can be trimmed to get more material to come outTip- they sell fan tip nozzles. We put a small piece of tape in the middle of it to get a dual stream
Recommended Products
$73.00
$ 31 .99 $31.99
$31.99
$ 14 .99 $14.99
$27.93
$ 11 .99 $11.99