Your cart is empty.
Your cart is empty.Product Description
Inslogic Standard Pro Resin - 3D Printer Resin
S & L
Reviewed in the United States on March 25, 2025
First up... I wish other manufacturers would switch to these square'ish, box style bottles of resin. I've only seen a few others that have, but I like them a LOT. The design tends to make pouring resin, much easier.But I digress...Performance wise, this stuff I would say is on par with Elegoo's 8k Standard resin, but might be a LITTLE more flexible than that.Exposure times on a Saturn 4 Ultra average about 24seconds on bottom layers, with 1.8 seconds exposure on the upper layers.. BUT, I do want to point out, I keep my printer inside a warmed enclosure/tent.. so your mileage may vary.Quality is good, supports are stiff, and do their jobs, as expected.. with little scarring overall, even when cured before removal.If anything, the only somewhat weird thing I've encountered, with this resin, is that I seem to have to leave the printed parts in the wash basin longer, to get leftover residue rinsed off.(The photo is a part of a coat, of a modeled figure, right after it'd been cured. I'll likely give it a soft bristled brush down, before priming and painting it)I have zero complaints over this resin, and would happily purchase more of it again.
Nomadic
Reviewed in the United States on March 25, 2025
This resin is easy to work with and handles printing minis well. I like the bottle shape but it's not something I have to have either. Overall, pretty good. We'd use it again.
Paul
Reviewed in the United States on March 23, 2025
Great detail and no issues on my Saturn S4 Ultra.
D
Reviewed in the United States on March 22, 2025
I printed this resin on my Saturn 4 Ultra. Doing resin calibration, I found an ideal exposure time is about 30s for bottom layers and 1.9-2s for regular layers. I found the odor wasn't too strong, and the viscosity of the resin was nice and runny once I heated it up to 30C. All in all, the prints I've done so far were successful without any failures and I think this is a nice solid resin that I wouldn't hesitate to use interchangeably with my standard go-to resins from Elegoo and Anycubic. Price-wise, this resin goes for around $15/bottle with coupon, which is about in line with standard resins from common brands so I think the value is fine but nothing to write home about.
Gc
Reviewed in the United States on March 19, 2025
The resin performed very well. The bottle is nice to use and hold, but it won't fit anything that supports the standard round bottles. I get the nice bottle marketing trick, but rounder bottles are still preferred. This resin works well, but nothing out of the ordinary. The color looks like raw light gray. I didn't see much blue, but it will be painted over anyways. I was able to get very detail prints from my Mars 5 ultra. The cleaning process was straightforward. I keep it in resin detergent for about an hour, then rinse with water, dry, and cure with UV. For some models, I only UV for a few minutes in hope that it will keep some kind of flexibility.
Eric Customer
Reviewed in the United States on March 15, 2025
This stuff came in yesterday and I just finished my first print with it. Running this in a mars 5 ultra and the first piece finished without any issues. I did turn up the exposure time on my first few layers just in case though. The detail is pretty good, definitely good enough for the mini’s I print. The viscosity seems about right, no issues with suction of the FEP in the vat, well it didn’t tear the sheet and there’s layers look good so yeah. I like the bottle it comes in. Trivial, but still, I do like it. It’s a bit more expensive than some of the budget resins and less than the high end stuff, it it performed well. I do know that as my machine prints the temp increases. I didn’t notice and changes through the layers so I would say, in my case, it’s fairly forgiving of ambient temps.
Recommended Products