Your cart is empty.
Your cart is empty. This UV LED light with 6 high power 405nm UV LED , can fast curing the 405nm UV resin printed objects, make the objects solid efficiently and use less time than usualy ways
Within 5 cm to the light, the resin can be cure within 10-15 seconds, but thicker parts need more time.
This light can be apply to DIY curing enclosue or use in handheld way .due to strong UV light output, please ware eye protection device when use this light.
The parcking list
1* UV light with Standard US adapter
Details
Light Output . 6W power and 60W UV light affect
Power Input: AC 85V-264V, 50-60Hz 0.3A Max,Output: DC:10-27V 300mA+/-5%
Weight: 0.6kg
Size: 115x87x76 mm or115x87x90mm( random delivery)
Applicant with to curing models made 405nm LCD 3D Printer
the uv light can drive turntable rotate, so the item could be cured more even,recommend order solar turntable together
Esomatado
Reviewed in Mexico on March 7, 2024
Es una buena lampara UV, llego con todos sus accesorios, la cantidad de cinta reflejante permite hacer una buena cabina de curado y la base giratoria solar 100% funcional
Joshua
Reviewed in the United States on November 2, 2024
So I use this light to cure UV resin on my 3d prints . It’s works great for like 3 months then stops working . I ordered a second one hoping it was just a lemon. Same thing happened again . I don’t recommend.
Sunshine
Reviewed in the United States on August 2, 2021
I needed a UV resin curing light for my SLA prints and came across this one. It comes with US plug, but it's a multi voltage and can be used in countries that use 220V. I didn't want to use an adapter because I don't find it that safe, so I purchased a local wall connector suitable for my country, but the one at the end of this lamp and replaced it. If you want to do the same make sure you know what you're doing! If you're unsure, consult an electrician or someone that does.
Brendan C-D.
Reviewed in the United States on September 8, 2020
The lamp gives off plenty of UV light and doesn't get too hot. I used the box it came in to make a curing chamber with the lamp and a light powered turn table. works great!
bobby arzadon
Reviewed in the United States on May 1, 2020
Awesome product. I manufacture and make Surfboards. Are use this for quick repairs and for UV inhibitor resin's.Great for those quick repairs
bigHALFpint
Reviewed in the United States on March 27, 2019
Works well for curing resin printed models. Keep the model far away if you'll be curing for more than a few minutes. Too close and it can turn the model brown especially with light colored resin (think tanning bed). To be on the safe side, I place my models 5 feet away or more.
Henchmen4Hire
Reviewed in the United States on December 10, 2019
If you regularly buy generic items from China, you know that the quality lottery is always a factor. Maybe 30% of the things I buy need to be returned because they're defective. This is usually an inconvenience at best, but it can be a safety hazard when we're dealing with things that plug into your wall and can fry your eyeballs.I got the UV light, plugged it in, and luckily I was holding it close to the floor pointed away from me because the ON/OFF switch was on. There's a tiny line on the "ON" side of the switch, you'll miss it if you arent looking for it. I suggest embossing giant "ON/OFF" letters on the switch.Whatever. I placed it facedown on a small box and started using it to cure some small UV resin pieces. A few minutes later a large truck roared past my window and rattled the table a little. The light blinked out from the rattling. After inspecting the light I found it had crappy wiring. Lightly tapping or moving the light caused it to blink on/off. Eventually it wouldn't turn on anymore and that's why it's getting returned.I will say though that it did a good job at curing the resin pieces, I think about 10-15 minutes is all it would take to cure them completely. Much better than putting them 4 hours in the sun, risking warping them.Also, if you want the free turntable, make sure TO PUT IT IN YOUR CART before checkout.Will update the review when the replacement gets here.Update: Replacement arrived, works fine. The switch was also in the ON position. Feh.
Dr Mike
Reviewed in the United States on November 25, 2019
Nice and bright. I cure pieces in about 9 minutes for a 360 degree rotation and at a distance of several inches. I like the extra long cord and the power switch on the cord instead of on the case. This disperses light well and is bright enough for me to cure a couple pieces at the same time with the right adjustment for timing. The case does not get hot. The integrated mounting bar is nice and has a good friction resistance without being too stiff or too loose. I highly recommend this one.
William T.
Reviewed in the United States on October 4, 2019
The media could not be loaded.
Recommended Products
$576.99
$ 99 .00 $99.00