Your cart is empty.
Your cart is empty.Product Description
The Proper Feet Application Process
Achieving the Max Adhesion on the Computer Cases by the Proper Applying Process
Step 1:Peel off the used or damaged feet
Step 2:Remove the rubber feet completely
Step 3:Use the Lint-free cleaning wipes, saturated with 97% isopropyl alcohol to clean the surface where the rubber feet are applied to.The cleaning surface is beneficial to achieve the max adhesion between the computer case and rubber feet.
Step4:Align the new rubber feet to the recess on the bottom base cover.Press down firmly.
Note:Please use the laptop after the new rubber feet has been installed for more than 24 hours.Then,the adhesion between the rubber feet and computer case would reach the max value.
A. Verchimak
Reviewed in the United States on January 7, 2025
Bought a used Dell convertible laptop/tablet that needed these. Fit perfectly.
North Carolina Consumers Council
Reviewed in the United States on July 17, 2024
Seemed like somewhat better quality than you would expect for something like this. It stuck pretty well for about a week, then started losing its hold. After only two weeks, the strips are sliding across the case over the grooves. Basically turned out to be a bust.
A Customer
Reviewed in the United States on December 29, 2024
Nive product, does its job. holding fine so far
Just me
Reviewed in the United States on July 3, 2023
Just needed to cut to length of what was needed. My feet on the bottom of my HP laptop are not as long as what was supplied. Yet that's ok I've got enough to fix 4 times.GOOD PRODUCT
Eli
Reviewed in the United States on January 5, 2023
Not as long as the one for my laptop even though it is stated that it is compatible for my model. My laptop is Dell Inspiron 7460.Will update this review after a few days for the adhesion.
Lij
Reviewed in the United States on April 2, 2023
It was way shorter than my computer smh
CD
Reviewed in the United States on September 24, 2022
Bought these to replace the destroyed feet on two HP ProBook 435 G7 laptops. They do not fit in the channel for the original feet, but they work just fine adhered to the flat bottom of the laptop, close to the original location.I just did this fix a couple weeks ago, so only time will tell how long the adhesive lasts.
jess
Reviewed in the United States on January 11, 2022
I ordered these because the non-slip grips starting coming off the base of my laptop. I have a fairly large HP and these strips were a little short so I just cut one of the extras and they work just fine. Overall pleased. Would purchase again if needed.
Recommended Products